Categories

Best Ic Voltage Regulators

2 Pieces Voltage Regulator Automated Engine Voltage Rectifier Compatible with Kohler 234279 2575503S 41-403-08 41-403-08S 41-403-10 41-403-10-S 4140305 4140309

  • Good performance: the high voltage will hurt the battery, wiring system and other electrical accessories.
  • These rectifier regulators can control the....
  • Reliable material: these voltage regulator rectifiers are made of aluminum housing and heat-dissipating silica gel, they can keep the heat output....
  • Protection function: these voltage rectifiers can act as chargers, and provide battery charge protection function.
  • Voltage stability: the output voltage of these regulator rectifiers is stable at 14.5 ± 0.5 V of Direct Current, which can protect various electronic....
  • Adaptation part numbers: these voltage regulators are compatible with Kohler 234279, 2575503S, 41-403-08, 41-403-08S, 41-403-10, 41-403-10-S, 4140305,....
Check Stock

Step Down/Up Transformer 220v to 110v, 3000W Voltage Converter 110 to 220 120v to 240V Heavy Duty Power Transformer

  • 【3000W Step Up Transformer 110v to 220v】: Step Up voltage converter from 100V-120V to 220V-240V .The ZHENGXI brand has 8 years of experience in the development and production of transformers, voltage regulators and regulators, with products sold to countries around the world and widely recognized . Passed CE & CQC certification.
  • 【Step Down Transformer 220v to 110v】:Two 220V Multifunction Output sockets and two 110V output sockers for appliances Fromr EURO,UK, China, Korea, HK, Philippine, US,etc.For safety reasons, it is recommended that appliances not exceeding 2400W be used to prevent damage to the transformer and the appliances used.
  • 【Upgraded 110 to 220 Voltage Converter】：Unlike those large, bulky (stinky) converters, this newly designed 110V/220V to 220V/110V converter doesn't produce noise/smell/heat, it's quieter, more efficient,and equipped with voltage display can more clearly see the output voltage.
  • 【120v to 240v step up transformer】:As we all know, in most cases the power consumed by the appliance at the moment of power on is the largest, so when choosing a transformer, please refe....
Check Stock

Easycargo 100pcs Heatsink Assortment Kit Small Cooler Aluminum Heatsink Set for Cooling PC Laptop PS5 M.2 CPU GPU VGA RAM VRAM VRM IC LED MOSFET Transistor Voltage Regulator (Preapplied Thermal Tape)

  • Update Version: 100pcs (18+82) small to medium sizes of heat sink. Pre-applied 3M 8810 thermal conductive adhesive tape..
  • Small anodized Aluminium: 20pcs 9x9x5mm, 8pcs 10x10x10mm, 8pcs 11x11x5mm (L*W*H).
  • Medium anodized Aluminium: 8pcs 14x14x7mm, 8pcs 19x19x5mm, 8pcs 20x20x6mm, 2pcs 22x22x10mm (L*W*H).
  • Silver Tone Aluminium: 20pcs 7x7x6mm, 10pcs 8.5x8.5x8mm, 8pcs 15x15x6.5mm (L*W*H).
  • Can be used for cooling of variety of electronics components such as Development Boards VRAM VRM CPU GPU VGA RAM IC Chips LED Laptop MOSFET Transistor SCR Southbridge Northbridge Voltage Regulators PS5 M.2 M2 SSD NVMe 2280 2242 22110 modules..
Check Stock

NTE Electronics MJ10012 Silicon NPN Power Darlington Transistor, 400V, 10 Amp

  • High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
  • Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 60 Vdc (Min) TIP120, TIP125.
  • Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
  • Monolithic Construction with Built-In Base-Emitter Shunt Resistors.
Check Stock

Bridgold 20pcs TIP127 PNP BJT Transistors Darlington Bipolar Power Transistor 5A -100v 3Pins

  • Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 100 Vdc (Min) TIP122, TIP127.
  • Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
  • High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
  • Monolithic construction with built-in base-emitter shunt resistors.
Check Stock

Bridgold 10pcs TIP102 102 Bipolar BJT Single NPN Darlington Transistor 100 V/8 A,3-Pin TO-220

  • High DC Current Gain − hFE = 2500 (Typ) @ IC = 4.0 Adc.
  • Collector−Emitter Sustaining Voltage − @ 30 mAdc VCEO(sus) = 100 Vdc (Min) − TIP102, TIP107.
  • Monolithic Construction with Built−in Base−Emitter Shunt Resistors.
  • Low Collector−Emitter Saturation Voltage − VCE(sat) = 2.0 Vdc (Max) @ IC = 3.0 Adc = 2.5 Vdc (Max) @ IC = 8.0 Adc.
  • We have undergone rigorous testing and stable performance.
Check Stock

(20PCS) 2EZ15D5 DIODE ZENER 15V 2W DO-41 2EZ15 2EZ15D

  • 2V to 39V .0.5 Watt Zener Diodes Assortment Set (Pack of 30 Values, Each 10 Pieces, Total 300 Pieces).
  • The assortments contain the following voltage: 2V 2.2V 2.4V 2.7V 3V 3.3V 3.6V 3.9V 4.3V 4.7V 5.1V 5.6V 6.2V 6.8V 7.5V 8.2V 9.1V 10V 11V 12V 13V 15V 16V 18V 20V 22V 24V 27V 30V 39V.
  • These diodes are widely used as voltage references and as shunt regulators to regulate the voltage across small circuits..
Check Stock

Chanzon 10pcs TIP120 TO-220 NPN Darlington Transistor 5A

  • High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
  • Monolithic Construction with Built-In Base-Emitter Shunt Resistors.
  • Collector-emitter saturation voltage - VCE (sat) = 2 V (maximum) at IC = 3 A.
  • Low collector-emitter saturation voltage.
Check Stock

Siglent Technologies SDG1062X Series Dual-Channel Function/Arbitrary Waveform generators

  • 【Specifications】Voltage Supply: 9-12V DC Input.
  • Input Distortion: less than 1% (at 1KHz).
  • 【welding steps】The welding installation considerations, follow these steps: First,the components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.Then welding IC socket, terminal blocks, finally power socket, adjustable potentiometer..
  • 【Debugging steps】After completion of welding on IC, XR2206, you need to pay attention to the direction of IC, or insert the might damage the chip! Check IC for errors, if any, please correct in time..
  • 【Power】 Insert the power supply, power supply for 5.5 x 2.1 port, inside and outside is negative polarity.
  • Fitting for 9-12 v power supply voltage, and the waveform may not be stable for more than 12V..
  • 【Please note】these are DIY kits, you need to follow the welding steps in our description and complete the final installation..
Check Stock

PISCSID 74505-06 HARLEY Voltage Regulator Rectifier Fit For Harley Davidson Electra Glide Classic 2006-2008,ROAD KING CLASSIC 2006-2008,2006-2008 FLT FLH Street,498269,498276

  • COMPATIBLE MODELS: Voltage Regulator Rectifier Fit for 2006 2007 2008 Glide 2006 2007 2008 Road Glide 2006 2007 2008 Road King 2006 2007 2008 Street Glide.
  • OEM NUMBER: Replaces HARLEY-DAVIDSION voltage regulator part numbers:H 74505-06 74505-06A 498269 49-8269 498276 49-8276. Please check OEM number before buying..
  • HIGHT QUALITY: Voltage regulator rectifier ueses original stabilivolt and advanced heat conduction system to control the output. Voltage stabilize at 12V to Protech Battery System, Lights,Reduce Load, and Extending Mortorcycle Service Life.ALL Regulators have been Tested Strictly to make sure every regulator have original HARLEY regulator Performance..
  • GOOD MATERIAL:Voltage rectifier regulator use high quality aluminum Shell , highest grade and thick aluminum substrate , high-performance electronic components..
  • SATISFAY AFTERSELL SERVICE:All Voltage Regulator Rectifier will Test Before Shipping. If you have Any Dissatisfaction with Our Product, Please let us Know and we will.
Check Stock

NOYITO ACS758LCB-050B-PFF-T Linear Current Sensor Hall Current Module

  • ...758-LCB current sensor. The ACS758 consists of a precision, low-offset linear Hall sensor circuit with a copper current path close to the wafer. The current applied through the copper current path is capable of generating a magnetic field that can be induced by the integrated Hall IC and converted to a proportional voltage.003cbr003e.
  • Device accuracy is optimized by placing the magnetic signal close to the Hall sensor. The accurate, proportional output voltage is provided by a stable chopper-type, low-bias BiCMOS Hall IC that is factory-precisely programmed.003cbr003e.
  • The internal resistance of this conduction path is typically 100 μΩ with low power loss. The thickness of the copper wire allows the device to operate under high overcurrent conditions. The terminals of the conduction path are electrically isolated from the sensor pins (pins 1 to 3). In this way, the ACS758 sensor IC family can be used in applications that require electrical insulation without the use of opto-insulators or other expensive insulation techniques.003cbr003e.
  • Perform RC filtering on the output and use the op amp to build a voltage follower circuit to make the output more stable and better match the impedance of the A/D channel of the microcontroller. At the same time, two o....
Check Stock

ACCEL 201107C Chrome Electro Mechanical Voltage Regulator, Black, One Size

  • American made Bosch type voltage regulators.
  • Fits 1965 to 1978 Harley Davidson XLCHs and 1965 to 1966 XLH900s.
  • Heavy duty shock mounted bases with vibration resistant internal connections.
Check Stock

ACCEL 201106C Chrome Electro Mechanical Voltage Regulator

  • American made Delco type voltage regulators.
  • Heavy duty shock mounted bases with vibration resistant internal connections.
Check Stock