Inateck USB 3.0 to IDE/SATA External Hard Drive Reader Applicable to 2.5 /3.5 HDD/SSD with 12V/2A Power Supply SA03001

  • Universal USB to SATA/IDE Adapter: Supports 2.5"/3.5" SATA HDD and SSD, 2.5"/3.5" IDE HDD, SATA DVD-ROM, CD-RW, DVD-RW, DVD+RW Optical Drive,two IDE....
  • Works with up to 3 HDDs: This USB 3.0 to IDE and SATA adapter is equipped with a SATA III connector and 2 IDE connectors (one 2.5" and one 3.5"). It....
  • High Speed Transfer: Data transfer speed reaches up to 5Gbps. Backward compatible with USB 2.0/1.1..
  • Support Systems: Windows 11/XP/Vista/7/8/10(32bit and 64bit).
  • on/off switch for HDD protection. Led light shows power and activity status..
Check Stock

SATA/IDE to USB 3.0 Adapter, Unitek IDE Hard Drive Adapter for Universal 2.5\/3.5\ Inch IDE and SATA External HDD/SSD, Support 10TB

  • 【Universal IDE Hard Drive Adapter】Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector. Support SATA 2.5"/3.5" HDD up to 10 TB, IDE 2.5"/3.5" HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Allowed to operate three hard disk drives simultaneously..
  • 【Stable Power Supply】Included 12V 2A power cable. 4PIN Power Cable is designed for 3.5’’ IDE drive..
  • 【SuperSpeed USB 3.0】Data transfer rates up to 5Gbps, backward compatible with USB 2.0/1.1. Support Windows XP/Vista/7/8/10 and Mac OS..
  • 【Driver Free】Plug and play. Automatic Sleep Mode after 30 minutes of inactivity. Support Hot Swapping. On/Off Switch for HDD protection. LED light shows Power and Activity status..
  • 【What We Offer】SATA/IDE to USB 3.0 Adapter Hard Drive Cable x1, 12V 2A Power Adapter x1, 4PIN Power Cable x1.
  • 24h-friendly customer service and email support..
Check Stock

MANHATTAN SCSI ADAPTER DB50/HP F, DB25 M, IADAP SCSI -450

  • Universal IDE Hard Drive Adapter】Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector. Support SATA 2.5"/3.5" HDD up to 10 TB, IDE 2.5"/3.5" HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Allowed to operate three hard disk drives simultaneously..
  • 【SuperSpeed USB 3.0】Data transfer rates up to 5Gbps, backward compatible with USB 2.0/1.1. Support Windows XP/Vista/7/8/10 and Mac OS..
  • 【10 Gbps Ultra-fast Transfer】USB 3.2 Gen 2 M.2 SSD Enclosure can transfer large files to your computer within seconds with 10Gbps transfer speed. 32Gbps PCIE 3.0 connects to M.2 NVME SSD. Support UASP/Trim and maximize the data transmission..
  • 【Compatibility】Compatible for solid state drivers size 2242/2260/2280. Support Windows 7/ 8/ 8.1/ 10/ Linux/ Mac OS 10.10.5 or higher Version. The SSD enclosure is suitable for SSD based on M-Key and M+B Key NVME PCIE. NOT compatible with B Key NVME, M and B&M Keys SATA, PCIe AHCI SSD, mSATA SSD and non-M.2 form factor SSDs..
  • 【Safe and Stable】USB adapter built-in short-circuit, over-current and multiple protections to ensure the safety of your SSD and data. Better heat dissipation to keep the temperature in normal range, which will not damage the M.2 SSD..
Check Stock

USB 3.0 to SATA/IDE Hard Drive Adapter Hard Drive Reader for Universal 2.5 3.5-Inch IDE and SATA External HDD/SSD with 12V 2A Power Supply Support 6TB

  • 【Universal IDE SATA to USB 3.0 Adapter】: Hard drive reader support SATA 2.5"/3.5" HDD.
  • 2.5"/3.5" IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW....
  • 【SuperSpeed up to 5Gbps】: IDE to USB adapter supports a 5Gbps high-speed transfer rate (up to 10x as fast as USB 2.0), which is 70% Faster than....
  • 【Broad Compatibility】: External hard drive to usb adapter support Windows XP/Vista/7/ 8.1/ 8/10, Mac OS 10 or higher, Linux, etc. Support devises....
  • 【Huge Capacity Supportive】: Designed to be lightweight and compact. enables access to 2 drives simultaneously. LED indicator light shows Power and....
  • 【Comes with Power Supply & OTG Adapter】: Included 12V 2A power cable is for providing a stable electricity supply. Note: 4PIN Power Cable is....
Check Stock

Alxum USB 3.0 to IDE SATA Converter Hard Drive Reader for Universal 2.5/3.5 IDE Hard Drive & SATA HDD SSD Support One Touch Backup and Max 18TB with 12V 2A Power Adapter & USB A Cable 80cm

  • Alxum SATA IDE to USB Adapter can connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with....
  • Unique One-Touch Backup (OTB) Function. Allow you realize data back via one-touch operation. Easy transfer data between three hard drives. Plug and....
  • SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downward compatible with USB 2.0 (high-speed 480 Mbps) / USB 1.1 (full-speed 12 Mbps)....
  • Alxum SATA and IDE Hard Drive Dock support 2 IDE hard drive and 1 SATA hard drive connecting simultaneously, compatible with two IDE hard drives....
  • Broad Compatibility of Operate Systems: Support Windows XP/Vista/7/ 8/8.1/10, Mac OS 10 or higher, Linux. We offer: SATA/IDE Hard Drive Cable, 12V 2A....
Check Stock

AGPtek SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for Hard Drive Disk HDD 2.5" 3.5", Compatible with USB 1.1/2.0/3.0, with External AC Power Adapter Included

  • ◆ USB 2.0 to 2.5" 3.5" IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage..
  • ◆Use your 2.5" / 3.5" IDE hard drive or SATA hard disc as an external hard drive. Connect your ide to usb adapter to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver..
  • ◆ Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed..
  • ◆ AGPtEK sata to usb adapter can be easily connected to the IDE device / SATA device and make the hard disk device more portable..
  • ◆ This usb sata ide adapter is easy to use and plug & play, no drivers needed..
Check Stock

Inateck USB 3.0 to IDE/SATA External Hard Drive Reader Fit for Universal 2.5/3.5 HDD/SSD Hard Drive Disk IDE to USB Adapter with 12V/2A Power Supply and USB 3.0 Cable UA2001

  • External hard Drive Reader: support 2.5/3.5 SATA HDD and SSD, 2.5 /3.5 IDE HDD, SATA DVD-ROM, CD-RW, DVD-RW, DVD+RW Optical Drive, dual-head IDE....
  • Widely Compatibility: This USB 3.0 to IDE and SATA adapter allow to operate 3 HDDs simultaneously, It is compatible with 2.5"/3. 5" Ide/SATA hard....
  • High speed transfer: data transfer up to 5Gbps. Backward compatible with USB 2.0/1.1..
  • Support system: Windows XP/Vista/7/8/10(32bit and 64bit).
  • Linux,Mac OS 10. X (OTB mode isn't applicable for W8 and Mac).
  • on/off switch for HDD protection. Led light shows power and activity status..
Check Stock

FIDECO SATA/IDE to USB 3.0 Adapter, Hard Drive Adapter Cable for Universal 2.5/3.5 Inch IDE/SATA External HDD SSD, 5.25-Inch DVD-ROM/CD-ROM/CD-RW, Offline One Touch Clone, Support 16TB (Cable PL06)

  • 【Wide Compatibility】FIDECO IDE and SATA adapter can support 2.5 or 3.5 inches SATA or IDE hard drives. It can support the simultaneous connection of 2 HDDs for data transfer - IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Please note that IDE Source and SATA1 Source cannot be connected simultaneously..
  • 【Offline Clone】FIDECO hard drive converter can support offline clone. No computer is needed! Just press the "CLONE" button for 3 seconds until the first blue light (25%) flashes. You can operate offline clone only in 2 combinations: IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Capacity requirement: SATA2 Target ≥ IDE/SATA1 Source..
  • 【Compatible System】FIDECO SATA or IDE adapter is widely compatible with Windows, Mac OS, and Linux. Just plug and play with no driver or software needed!.
  • 【5Gbps High Speed】FIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. Transfer large files within seconds! It can be also backward compatible with USB 2.0/1.1..
  • 【Warm Note】For new HDD/SSD, please go to "Disk Management" to initialize it first, and then your HDD/SSD can be recognized. If you have any other question, please contact us via amazon email at any time. Our engineer can offer tech....
Check Stock

SATA/IDE to USB 3.0 Adapter, External Hard Drive Reader for Universal 2.5/3.5 Inch IDE and SATA HDD SSD, 5.25' CD/DVD Drives, Hard Drive Converter with Power Adapter Support 6TB

  • 【Provide Drives Fast Data Access】: The usb hard drive adapter can easily connect IDE and SATA Devices Using a USB Port Hard drives, transferring and sharing files between desktop and notebook computers, backing up files or storing large file archives on external drives is faster and easier to accomplish.
  • 【Universal Hard Drive Reader 】: IDE SATA to USB 3.0 adapter Compatibility with hard drives — including 2.5 " 3.5" SATA HDD and SSD.
  • DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. The included power supply supports drives with higher usage requirements like 3.5" drive— makes this a versatile tool for professional and home users..
  • 【Supe-Speed Transfer up to 5 Gbps】 : This external sata to usb ssd adapter supports transfer rates up to 5Gbps using USB 3.0, Provides fast access to external storage, which is 70% Faster than traditional USB 3.0 and 80% reduction in required processor resources Backward compatible with USB 2.0(480 MB/s), 1.1..
  • 【Support up to 6TB Capacity Drive】: universal Hard drive reader has a SATA connector and two IDE connectors (40pin and 44pin). upports drives with a capacity of up to 6 TB, hard drive reader enables access to 2 drives simultaneously. LED indicator light shows Power and activ....
Check Stock

Generic SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for 2.5/3.5 Inch Hard Drive/5 inch Optical Drive with External AC Power Adapter

  • USB 2.0 to 2.5" 3.5" IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage..
  • Use your 2.5" / 3.5" IDE hard drive or SATA hard disc as an external hard drive. Connect your SATA / IDE device to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver..
  • Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed..
  • USB 2.0 to IDE/SATA Cable can be easily connected to the IDE device / SATA device and make the hard disk device more portable. Also, it is easy to use and plug & play, no drivers needed..
  • Satisfaction Guarantee: We always want to offer striving hard to provide our customers with best shopping experience. If you are not satisfied for any reason, please do not hesitate to contact us. We will offer you a satisfactory solution. Thank you!.
Check Stock

SATA/IDE to USB 3.0 Adapter FIDECO USB 3.0 Hard Drive Adapter Cable Universal for 2.5/3.5 inch SATA HDD/SSD & IDE HDD with 12V/2A Power Adapter

  • Universal SATA/IDE Hard Drive Adapter: It can support 2.5 "/3.5" SATA I/II/III Hard Drive and 2.5'' SATA SSD.
  • Super Speed USB 3.0: USB 3.0 supports transfer rates of up to 5Gbps(The actual transmission speed is limited by the setting of the device....
  • Pulg & Play: Support Plug and play & hot swap, On/Off power Switch for Hard drives protection. Tips: Some IDE hard drive is old, you need to set....
  • System Compatibility: Support Windows XP/Vista/7/ 8.1/ 8/10, Mac OS 10 or higher, Linux etc. Support devices PS4/Xbox/TV/monitoring equipment..
  • Customer Focus: Our goal is to give you a 100% satisfaction shopping experience, so we provide 18 months warranty.
Check Stock

160 GB 160G 5400 RPM 2.5' IDE PATA WD1600BEVE for Laptop Hard Disk Drive

  • Connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.5"/3.5" IDE/SATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Compatible read up to three hard drives simultaneously!.
  • One Touch Backup (OTB) Function. Design for people who need to backup data from your computer to portable hard drive. (Please install the included OTB Software CD. OTB function doesn't work for Mac OS and Linux).
  • Plug and Play, Hot- swappable, no driver needed. On/Off Switch design for HDD protection. Led light shows power and activity status..
  • Support 2 IDE and 1 SATA hard drives connecting simultaneously! Compatible with two IDE hard drives simultaneously, If not, Please set the 3.5'' IDE to be the slave drive based on the instruction on the hard drive.
  • SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0(high-speed 480 Mbps) / USB 1.1(full-speed 12 Mbps) standards. The actual transmission speed subjects to the setting of the device connected.
Check Stock

Coolgear USB 3.0 to PATA and SATA 3.5 and 2.5 inch Hard Drive Adapter

  • DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector..
  • Allow to operate three HDDs Simultaneously. Data transfer rates up to 5 Gbps, backward compatible with USB 2.0/1.1..
  • Included 12V 2A power cable is for providing stable electricity supply. Note: 4PIN Power Cable is designed for 3.5’’ IDE drive, SATA drives are not applicable and unnecessary..
  • On/Off Switch for HDD protection. LED light shows power and activity status..
  • What we offer: USB 3.0 to IDE+SATA Adapter, USB 3.0 Cable, 4PIN Power Cable, Power Adapter, OTB Software CD, 24h customer email support..
Check Stock