Categories

Best Ide To Usb For Linux

EZ DUPE HD Pal Pro 1 to 3 Hard Drive Duplicator 36GB/Min & Analysis Lab - Deluxe Kit with Rugged Protective Case - SATA & IDE PATA 3.5' & 2.5' HDD/SSD Storage Backup - DM-HS3-4H3BP(D)

  • ...5 Gbps, supports UASP. which is 70% Faster than traditional USB 3.0 and 40% reduction in required processor resources, Backward compatible with USB 2.0 / 1.1.
  • ▶Broad Compatibility: You can use IDE drives, standard SATA drives, The USB to ide SATA adapter compatible with Windows 10/ 8.1/ 8/ 7/Vista/XP, Mac IOS, and LINUX.
  • just plug the adapter in terminals to the hard drive and USB port on the computer, There are no drivers required.
  • ▶Huge Capacity Supportive: Designed to be lightweight and compact. IDE hard drive adapter supports a hard drive capacity of Up to 6TB capacity. a enables access to 2 drives simultaneously, Tips: Some IDE hard drive is old, In order for you to use a “single” 3.5″ IDE hard drive, you will need to set the jumper to “slave” before turn on the disk.
  • on/off switch for HDD protection. Led light shows power and activity status. comes with a 12V 2A power supply, you can power larger form-factor SATA drives or IDE drives and likely others. for IDE drives, you have to use the 4-pin power cable adapter to a plugin.
Check Stock

JacobsParts 2.5' USB 2.0 IDE/PATA Hard Drive Enclosure Case

  • Turn any 2.5" IDE hard drive into a USB 2.0 external hard drive.
  • Powered by USB, no external power supply needed.
  • LED power indicator changes color to indicate hard drive activity.
  • Fully Supported by Windows XP, Windows Vista, Windows 7, Mac OS X, and Linux, No drivers needed.
  • IDE drives are older and often require more power than a single USB port can provide. A two-headed USB cable is provided so that extra power can be drawn from a second port..
Check Stock

WEme USB 3.0 to SATA IDE Adapter with Universal 2.5\ 3.5\ Hard Drive Disk Converter for HDD SSD and IDE HDD, Support 12TB and One-Touch Backup, Include 12V 2A Power Adapter and USB 3.0 Cable for Laptop

  • Connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.5"/3.5" IDE/SATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Compatible read up to three hard drives simultaneously!.
  • One Touch Backup (OTB) Function. Design for people who need to backup data from your computer to portable hard drive. (Please install the included OTB Software CD. OTB function doesn't work for Mac OS and Linux).
  • Plug and Play, Hot- swappable, no driver needed. On/Off Switch design for HDD protection. Led light shows power and activity status..
  • Support 2 IDE and 1 SATA hard drives connecting simultaneously! Compatible with two IDE hard drives simultaneously, If not, Please set the 3.5'' IDE to be the slave drive based on the instruction on the hard drive.
  • SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0(high-speed 480 Mbps) / USB 1.1(full-speed 12 Mbps) standards. The actual transmission speed subjects to the setting of the device connected.
Check Stock

USB 3.0 to SATA/IDE Hard Drive Adapter Hard Drive Reader for Universal 2.5 3.5-Inch IDE and SATA External HDD/SSD with 12V 2A Power Supply Support 6TB

  • 【Universal IDE SATA to USB 3.0 Adapter】: Hard drive reader support SATA 2.5"/3.5" HDD.
  • 2.5"/3.5" IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW....
  • 【SuperSpeed up to 5Gbps】: IDE to USB adapter supports a 5Gbps high-speed transfer rate (up to 10x as fast as USB 2.0), which is 70% Faster than....
  • 【Broad Compatibility】: External hard drive to usb adapter support Windows XP/Vista/7/ 8.1/ 8/10, Mac OS 10 or higher, Linux, etc. Support devises....
  • 【Huge Capacity Supportive】: Designed to be lightweight and compact. enables access to 2 drives simultaneously. LED indicator light shows Power and....
  • 【Comes with Power Supply & OTG Adapter】: Included 12V 2A power cable is for providing a stable electricity supply. Note: 4PIN Power Cable is....
Check Stock

MANHATTAN SCSI ADAPTER DB50/HP F, DB25 M, IADAP SCSI -450

  • Universal IDE Hard Drive Adapter】Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector. Support SATA 2.5"/3.5" HDD up to 10 TB, IDE 2.5"/3.5" HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Allowed to operate three hard disk drives simultaneously..
  • 【SuperSpeed USB 3.0】Data transfer rates up to 5Gbps, backward compatible with USB 2.0/1.1. Support Windows XP/Vista/7/8/10 and Mac OS..
  • 【10 Gbps Ultra-fast Transfer】USB 3.2 Gen 2 M.2 SSD Enclosure can transfer large files to your computer within seconds with 10Gbps transfer speed. 32Gbps PCIE 3.0 connects to M.2 NVME SSD. Support UASP/Trim and maximize the data transmission..
  • 【Compatibility】Compatible for solid state drivers size 2242/2260/2280. Support Windows 7/ 8/ 8.1/ 10/ Linux/ Mac OS 10.10.5 or higher Version. The SSD enclosure is suitable for SSD based on M-Key and M+B Key NVME PCIE. NOT compatible with B Key NVME, M and B&M Keys SATA, PCIe AHCI SSD, mSATA SSD and non-M.2 form factor SSDs..
  • 【Safe and Stable】USB adapter built-in short-circuit, over-current and multiple protections to ensure the safety of your SSD and data. Better heat dissipation to keep the temperature in normal range, which will not damage the M.2 SSD..
Check Stock

ACEIRMC 8pcs Digispark Kickstarter Mini ATTINY85 USB Development Board Module Compatible for Arduino IDE 1.0

  • The Digispark is an Attiny85 based microcontroller development board similar to the line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar for Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when for Arduino is too big or too much..
  • The Digispark is shipped fully assembled except for the two included and easy to solder headers..
  • Support for the Arduino IDE 1.0+ (OSX/Win/Linux).
  • Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection).
  • 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
Check Stock

Inateck USB 3.0 to IDE/SATA External Hard Drive Reader Fit for Universal 2.5/3.5 HDD/SSD Hard Drive Disk IDE to USB Adapter with 12V/2A Power Supply and USB 3.0 Cable UA2001

  • External hard Drive Reader: support 2.5/3.5 SATA HDD and SSD, 2.5 /3.5 IDE HDD, SATA DVD-ROM, CD-RW, DVD-RW, DVD+RW Optical Drive, dual-head IDE....
  • Widely Compatibility: This USB 3.0 to IDE and SATA adapter allow to operate 3 HDDs simultaneously, It is compatible with 2.5"/3. 5" Ide/SATA hard....
  • High speed transfer: data transfer up to 5Gbps. Backward compatible with USB 2.0/1.1..
  • Support system: Windows XP/Vista/7/8/10(32bit and 64bit).
  • Linux,Mac OS 10. X (OTB mode isn't applicable for W8 and Mac).
  • on/off switch for HDD protection. Led light shows power and activity status..
Check Stock

FIDECO SATA/IDE to USB 3.0 Adapter, Hard Drive Adapter Cable for Universal 2.5/3.5 Inch IDE/SATA External HDD SSD, 5.25-Inch DVD-ROM/CD-ROM/CD-RW, Offline One Touch Clone, Support 16TB (Cable PL06)

  • ... for 3 seconds until the first blue light (25%) flashes. You can operate offline clone only in 2 combinations: IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Capacity requirement: SATA2 Target ≥ IDE/SATA1 Source..
  • 【Compatible System】FIDECO SATA or IDE adapter is widely compatible with Windows, Mac OS, and Linux. Just plug and play with no driver or software needed!.
  • 【5Gbps High Speed】FIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. Transfer large files within seconds! It can be also backward compatible with USB 2.0/1.1..
  • 【Warm Note】For new HDD/SSD, please go to "Disk Management" to initialize it first, and then your HDD/SSD can be recognized. If you have any other question, please contact us via amazon email at any time. Our engineer can offer technical support and firmware update..
Check Stock

SATA/IDE to USB 3.0 Adapter FIDECO USB 3.0 Hard Drive Adapter Cable Universal for 2.5/3.5 inch SATA HDD/SSD & IDE HDD with 12V/2A Power Adapter

  • Universal SATA/IDE Hard Drive Adapter: It can support 2.5 "/3.5" SATA I/II/III Hard Drive and 2.5'' SATA SSD.
  • Super Speed USB 3.0: USB 3.0 supports transfer rates of up to 5Gbps(The actual transmission speed is limited by the setting of the device....
  • Pulg & Play: Support Plug and play & hot swap, On/Off power Switch for Hard drives protection. Tips: Some IDE hard drive is old, you need to set....
  • System Compatibility: Support Windows XP/Vista/7/ 8.1/ 8/10, Mac OS 10 or higher, Linux etc. Support devices PS4/Xbox/TV/monitoring equipment..
  • Customer Focus: Our goal is to give you a 100% satisfaction shopping experience, so we provide 18 months warranty.
Check Stock

Tccmebius TCC-S865 USB 3.0 to SATA IDE Dual Slots External Transparent Hard Drive Docking Station with Card Reader and 2 Ports USB 3.0 Hub for 2.5 3.5 Inch IDE SATA I/II/III HDD SSD

  • Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 3.0 port, USB 3.0 data transfer rate up to 5 Gbps. Integrated card reader (TF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
  • WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..
Check Stock

7Pcs ATTINY88 Microcontroller Development Board 16Mhz I2C and SPI 26-PWM Digispark ATTINY85 Nano V3.0 Extended Module

  • ATTINY88 micro development board based microcontroller development board similar to the board line, only cheaper, smaller, and a bit less powerful..
  • With the ability to use the familiar IDE the MH-ET LIVE Tiny88(16.0Mhz) is a great board to jump into electronics, or perfect for when an other board is too big or too much..
  • ATTINY88 micro development board has 26 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
  • ATTINY88 micro development board support for the IDE 1.0+ (OSX/Win/Linux).
  • The MH-ET LIVE Tiny88(16.0Mhz) is fully assembled except for the headersincluded and easy to solder them by yourself..
Check Stock

Hard Drive Docking Station, Tccmebius TCC-S867-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External HDD Enclosure, for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD

  • ...g the OTB feature and downloading the OTB software, please refer to the product guide. Note: OTB software cannot be installed on macOS and IOS systems..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
  • WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..
Check Stock

AOICRIE 3pcs Digispark Kickstarter ATTINY85 General Micro USB Development Board Module Compatible

  • 6 I/O Pins (2 are used for USB only if your program actively communicates over USB..
  • Support for the for Arduino IDE 1.0+ (OSX/Win/Linux)..
  • Power via USB External Source - 5v or 7-35v (automatic selection)..
Check Stock