Categories

Best Ideal For Masonry

Romabio Masonry Flat, Italian Mineral Paint, Brick, Stone & Cementitious Siding, Richmond White, 2.5L

  • Romabio Masonry Flat is a beautiful, permanent flat finish that is naturally toxin-free, and environmentally friendly. High-performing mineral paint made for extreme durability for interior or exterior masonry..
  • Ideal for brick, stone, stucco, and cementitious siding. Breathable coating that calcifies to the masonry surface allowing moisture to release..
  • 2 coats, no additional primer for unpainted, absorbent masonry. Backed by a 20 year warranty when applied properly and will not chip, peel or flake off..
  • Easy to apply with brush, roller or sprayer. Touch ups can be done at anytime. Easy clean up with soap and water. Hand crafted in Italy using 2,000 year old techniques and modern technology for a revolutionary product..
  • Cradle to Cradle Certified, HPD, and A+ French VOC emissions, Romabio backs its marketing claims with 3rd party testing. Romabio products are “bio-logical,” manufactured with intelligence and care, and inspired our name: “Roma” for Rome, Italy, and “Bio” for organic and natural..
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

HOGARD 5 Pointing Bricklayer Trowel Premium | Stainless Steel with Soft Grip Handle | Best Marshalltown Trowel for Your Bricklaying Tools.

  • Highest-quality stainless steel blade - The blade is made from the highest-quality, solid, and corrosion-resistant stainless steel. This pointed....
  • Ideal for small jobs and repair jobs - Our concrete tools are designed for leveling, spreading, and shaping cement, plaster, and putty. The sharp,....
  • Ergonomics matter - We design our masonry trowels paying special attention to the handle ergonomics. We want to keep your wrists safe even on....
  • Applied innovative technologies - Thanks to our constant investment in innovative manufacturing technologies and state-of-the-art warehouses, we have....
  • Suitable for multiple applications - Our pointed masonry trowels are perfect for for small masonry repair jobs. Furthermore, our concrete tools have a....
Check Stock

Firecore FS305P Masonry Chisel with Hand Guard, 12 inches Heavy Duty Pointed Chisel with Hand Protection, Concrete Mortar Stone Breaker Chisel for Demolishing Carving Splitting Breaking Cutting

  • Made of heat treated CRV Steel. Forged construction for hardness, durability. Forged and heat-treated ground point provides a concentrated force ideal for breaking large pieces of concrete ​floors, sidewalks, and paving slabs when impractical to use an air hammer..
  • Ergonomically designed soft handguard for easy and convenient use. Bright safety yellow handle absorbs shock while protecting hand, fingers, and knuckles from glancing blows..
  • Total Length: 12 in (30.5 cm), Handle Length: 5.4 in (13.8 cm), The Length of Chisel Rod: 6.4 in (16.3 cm), The Diameter of Chisel End: 0.16 in (0.4 cm), Weight: 1.4 lbs (0.65 kg)..
  • Shock-absorb soft rubber cover handle is non-slip. Easy to do heavy duty works and get precise cut. Round handle design provides a secure, comfortable grip that allows for easy tool positioning..
  • The heavy-duty masonry chisel is applicable for metalworking and masonry, Ideal for sculpture, cutting, splitting, carving, demolishing brick, masonry, concrete, prying, and ripping nails and hardwood flooring etc..
Check Stock

Firecore FS305F Masonry Chisel with Hand Guard, 12 inches Heavy Duty Flat Chisel with Hand Protection, Concrete Mortar Stone Breaker Chisel for Demolishing Carving Splitting Breaking Cutting

  • Made of heat treated CRV Steel. Forged construction for hardness, durability. Forged and heat-treated ground point provides a concentrated force ideal for breaking large pieces of concrete ​floors, sidewalks, and paving slabs when impractical to use an air hammer..
  • Shock-absorb soft rubber cover handle is non-slip. Easy to do heavy duty works and get precise cut. Round handle design provides a secure, comfortable grip that allows for easy tool positioning..
  • Total Length: 12 in (30.5 cm), Handle Length: 5.4 in (13.8 cm), The Length of Chisel Rod: 6.4 in (16.3 cm), The Diameter of Chisel End: 0.77 in (1.96cm), Weight: 1.4 lbs (0.65 kg)..
  • Ergonomically designed soft handguard for easy and convenient use. Bright safety yellow handle absorbs shock while protecting hand, fingers, and knuckles from glancing blows..
  • The heavy-duty masonry chisel is applicable for metalworking and masonry, Ideal for sculpture, cutting, splitting, carving, demolishing brick, masonry, concrete, prying, and ripping nails and hardwood flooring etc..
Check Stock

Drill Bits Set/Screwdriver Bit Set, Longmate 226-Piece Drilling and Driving Accessories with Drywall Anchor and Screw, Drill Sets Combo Kit for Wood Metal Concrete Drilling and Screw Driving

  • 【EXCLUSIVELY DESIGNED FOR DIY】226-Pcs tool kit includes all the drill bits/screwdriver bits/anchors screw you need. 12 x HSS 4341 Drills: 2.5/3/3.2/3.5/4/4.5/4.8/5/5.5/6/6.5/8mm, 8 x Masonry Drills: 3/4/5/5/6/6/8/10mm,7 x Brad Point Wood Bits: 3/4/5/5/6/6/8mm, 28 x screwdriver bits, 170 x plastic anchors and screws, 1 x Magnetic bit holder.
  • 【HSS, BRAD POINT & MASONRY BITS】Twist drill bit is made by HSS4341 which is more hard and durable than 4241 for other similar drill bit. Suitable for most metal, wood and plastics Titanium coated for wear resistance and reduced friction. Masonry bits with Tungsten-Carbide tips ensure longer-lasting strength against brick and concrete by breaking up stone and masonry particles. Brad point bit for wood with piercing tips for accurate drilling starts and sharpened edge for easy cutting&churning out.
  • 【WIDE APPLICATION】 All-purpose for use on wood, metal, concrete, masonry, plastic drilling as well as multiple driving and fastening. Ideal for those everyday DIY drilling jobs at home and workshop with a range of drill bits to get the job done quickly and accurately.
  • 【WELL-ORGANIZED】With a side drawer storage box, easy to organize and sort. All accessories are placed in order, no mess.
Check Stock

Sabre Tools 1/4 Inch x 6 Inch Masonry Drill Bit, Carbide Tipped 5-Pack for Concrete, Brick, Stone, 1/4” Hex Shank, Impact Performance (1/4” x 6”, 5)

  • 1/4” x 4” x 6" Masonry hammer drill bits 5 pack set – Ideal for use with Tapcon concrete screws.
  • 1/4” Hex Shank Masonry Bit Set – Can be used with impact drivers and regular screw guns for added non-slip ability.
  • High quality masonry drill bits designed to work in.
  • Bit features U-flute with self-centering carbide tip, ensuring fast cut speeds and MAXIMUM life.
  • Our concrete drill bits have an optimized design, allowing material to quickly move out of the hole while bit remains cool.
Check Stock

Sabre Tools 3/16 Inch x 6 Inch Masonry Drill Bit, Carbide Tipped 10-Pack for Concrete, Brick, Stone, 1/4” Hex Shank, Impact Performance (3/16” x 6”, 10)

  • 3/16” x 4” x 6" Masonry hammer drill bits 10 pack set – Ideal for use with Tapcon concrete screws.
  • 1/4” Hex Shank Masonry Bit Set – Can be used with impact drivers and regular screw guns for added non-slip ability.
  • High quality masonry drill bits designed to work in.
  • Bit features U-flute with self-centering carbide tip, ensuring fast cut speeds and MAXIMUM life.
  • Our concrete drill bits have an optimized design, allowing material to quickly move out of the hole while bit remains cool.
Check Stock

Dremel US410-01 Ultra-Saw 4-Inch Diamond Surface Prep Abrasive Wheel , Green

  • Diamond chip technology for high performance surface preparation..
  • Ideal applications include concrete, tile, brick, masonry and cement..
  • Accessory is compatible with all Dremel corded and cordless Ultra Saw tools..
  • Quickly smooth bumps and cracks in concrete before finishing and to remove thinset mortar for tile remodeling..
  • Use your Ultra-Saw for concrete, masonry and tile surface preparation.
Check Stock

Portrait of a Garden

  • Everything you need, just supply own poles, electric drill, wire cutters and rivet gun. If you are fixing to masonry/brick walls a masonry drill bit and nylon plugs will be required.
  • Adorn fences & walls with climbing greenery.
  • Heavy duty wire 316 stainless steel - high tension / heavy loading. Unique tensioning system allows re-tensioning if wire becomes slack.
  • Number of Components: Anchors in capsules: 4 Anchor Platforms: 4 Hex head screws: (25mm) 8 Radial Wire Guides: 10 Hex Screws (40mm): 20 Tension Cap: 2 End Cap: 2 Wire in m (spooled) : 30m of 2mm '316' wire.
Check Stock

MIBRO 871060 High Speed Steel and Super Masonry Drill Bit Set 17 Pieces

  • Ideal for the "Do it yourselfer" with 12 all purpose bits and 5 masonry bits for most home projects.
  • High quality drill bits with professional features like 135 degree split point to eliminate "skating" and a hard carbide tip on the masonry drill bits.
  • All sizes 3/16-Inch and larger have 3 flats on the shaft to prevent slipping in the drill chuck.
  • Convenient durable storage case with easy access tilt out inserts.
Check Stock

Sabre Tools 3/16 Inch x 5-1/2 Inch Masonry Drill Bit, 10-Pack Concrete Drill Bit, Carbide Tipped for Concrete, Brick, Stone, Half Flat Shank, Impact Performance (3/16\ x 5.5\

  • 3/16” x 4” x 6" Masonry hammer drill bits 10 pack set – Ideal for use with Tapcon concrete screws.
  • Half Flat Shank Masonry Bit Set – Can be used with impact drivers and regular screw guns for added non-slip ability.
  • High quality masonry drill bits designed to work in.
  • Bit features double flute with self-centering carbide tip, ensuring fast cut speeds and MAXIMUM life.
  • Our concrete drill bits have an optimized design, allowing material to quickly move out of the hole while bit remains cool.
Check Stock

DEWALT Masonry Drill Bit Set, Percussion, Concrete & Block, 7-Piece (DW5207)

  • 2 cutter carbide tip of masonry drill bit set maximizes carbide surface contact for longer bit life..
  • Four flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238).
  • Rock carbide tip maximizes carbide surface contact for longer bit life.
  • Four-flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck.
  • For use with electric or cordless hammerdrills.
  • Ideal for drilling holes in brick, block, concrete, and masonry.
Check Stock