COMP Cams CL12-212-2 Magnum 224/224 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block

  • Great for street machines. Needs 2500+stall, headers and gears. Rough idle..
  • 230/230 Duration at .050". 110 Degree Lobe Separation Angle. 0.480"/0.480" Valve Lift.
  • CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
  • Great high RPM power - Best with aftermarket torque converters and at least 9.5:1 compression..
  • Easy on valvetrain parts - Can be used with mild ratio rocker arms and traditional performance valve springs..
  • Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..
Check Stock

COMP Cams CL12-235-2 Xtreme 4x4 210/218 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block

  • Strong low end and mid-range torque, good idle..
  • 210/218 Duration at .050". 111 Degree Lobe Separation Angle. 0.447"/0.462" Valve Lift.
  • CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
  • Designed for use with common restrictive factory exhaust systems, including OEM exhaust manifolds..
  • Improved throttle response and increased low and mid-range RPM horsepower for towing and off-road..
  • Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..
Check Stock

COMP Cams CL12-234-2 Xtreme Energy 212/218 Hydraulic Flat Cam and Lifter Kit Chevrolet Small Block

  • Strong torque thru low end and mid-range, good idle..
  • 212/218 Duration at .050". 110 Degree Lobe Separation Angle. 0.447"/0.454" Valve Lift.
  • CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
  • Excellent performance in street carbureted applications. Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve..
  • More vacuum allows an increase in duration for improved performance and assists power brakes. Best performance with aftermarket intake manifolds, headers and lower gear ratios..
  • Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..
Check Stock

Brian Tooley BTR Stage 2 Naturally Aspirated Cam and Spring Kit LS1 LS6 LS2 5.7 6.0

  • Good idle for daily usage or towing. Great low end and mid range torque..
  • 214/224 Duration at .050". 112 Degree Lobe Separation Angle. 0.443"/0.465" Valve Lift.
  • Lunati Cam and Lifter Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
  • Budget Conscious Power Production - Ideal for budget minded hotrodders, the Lunati Bare Bones camshaft series delivers serious horsepower increases without breaking the bank..
  • Modern Profile - Thanks to an asymmetrical lobe design, the Lunati Bare Bones line greatly increases throttle response and acceleration..
  • Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..
Check Stock

OCPTY 2H1094 Idle Air Control Valve FIT for Jeep for Cherokee 4.0l 1998-2001 for Jeep for Grand Cherokee 4.0l 1998-2004 for Jeep for Wrangler 4.0l 1998-2004

  • FITMENT:Idle Air Control Valve fit 1999-2002 for Dodge for Dakota 2.5l, 1999-2002 for Dodge for Dakota 3.9l, 2000-2001 for Dodge for Dakota 4.7l,....
  • ECONOMY: Good fuel economy is achieved by maintaining minimum idle speed and deceleration air volume control.Improve engine performance by increasing....
  • REFERENCE OEM PART NUMBER:Fuel Injection New Idle Air Control Valve for 2171783, 229571, 22969, 4874373, 4874373AB, 53030821, AC327, AC176, 2H1094.
  • INCREASE THE SPEED:The ECU controls the idle speed control valve to increase the air amount, thereby increasing the idle speed and protecting the....
  • ATTENTION:Please check the part number before purchasing to ensure fitment and Check for proper operation with each tune-up and replace when trouble....
Check Stock

TFCFL 100CC 2-Stroke Bicycle Gasoline Engine Motor Kit, Bike Bicycle 44 Tooth Motorized Petrol Gas Motor Engine Kit

  • The 100CC bike engine kit includes all the parts and accessories needed to convert a regular bike into a gasoline-powered motorcycle. Comes with all needed accessories for easy installation..
  • Low fuel consumption, 150 miles per gallon, very energy efficient and economical. Engine requires 8oz 2 Stroke oil per gallon of gas during Break In Period.Suitable for most 26" /28"bikes..
  • Upgraded Tunable High Performance Carburetor. Features: Choke lever on the handlebars, Main jet. (Can be re-jetted), Pilot jet, Copper oil needle, Idle RPM Screw, Idle Air Screw that delivers more fuel with the choke on, instead of restricting air..
  • 50mm bore single piece cylinder/head (increased weight capacity, lower operating temps, easier starting, sustained power output across varied rpm range).
Check Stock

RTFMUCA 01-0390 Throttle Cable Kit for Yamaha Blaster 200 1988-2006 with Carb Cap and Idle Adjuster Screw Removal Eliminator Kit

  • For use on Yamaha Banshee and Blaster models.
  • Used to install a standard Mikuni idle adjuster into the carburetor body.
  • Idle adjuster is necessary if carburetor top has been replaced with a standard Mikuni cap.
  • Kit includes a drill bit (#6), thread tap (6 millimeter x .75 millimeter), 2 idle screws with lock nuts and instructions.
  • Drill press or mill should be used to drill holes in the carburetor bodies.
Check Stock

Autolite 1100 Carburetor & Manual Choke 1963-1969 Mustang Falcon 200 Ci inline 6-cylinder automatic transmission F100 series truck 223 262 CI engines

  • The new carburetor has gone through many strict test procedures. We have tested the leakage, idle speed and other test items to ensure that the carburetor at the factory is suitable for fully qualified..
  • Truck F100 straight-6 engine 223 cu in (3.7 L).
  • Truck F100 straight-6 engine 262 cu in (4.3 L).
  • Mustang straight-6 engine 200 cu in (3.3 L).
  • When installing the carburetor, only adjust the air mixing screw on the base. If the idle speed needs to be adjusted, adjust the idle screw.
Check Stock

85401-201 Edge Evolution CTS3 - 50 State Legal

  • Change 5 power levels on-the-fly using +/- cruise control buttons.
  • Connects directly to ECU in engine compartment providing instant power.
  • Built-in throttle sensitivity control for improved throttle response.
  • High-idle user settings to adjust RPM during idle.
  • Transmission slip backdown power will decrease if slip is detected.
Check Stock

Vito s Performance Idle Screw And Jamb Nut

  • Applicable:Yamaha Banshee and Blaster models.
  • Fit:1987-2006 Yamaha Banshee 350 YFZ350,1988-2006 Yamaha Blaster 200 YFS 200.
  • install a standard Mikuni idle adjuster into the carburetor body.
  • Kit includes:drill bit (# 6), thread tap (6 millimeter x .75 millimeter), 2 idle screws with lock nuts and instructions.
  • replacing part:BA01-0511 / BA01-0513 throttle kits.
Check Stock

Not the Messiah: He's a Very Naughty Boy

  • Eric Idle, Michael Palin, Terry Jones (Actors).
  • Aubrey Powell (Director) - Eric Idle (Writer) - Geoff Foulkes (Producer).
Check Stock

Always Look on the Bright Side of Life: A Sortabiography

  • Eric Idle (Author) - Eric Idle (Narrator).
  • 10/02/2018 (Publication Date) - Random House Audio (Publisher).
Check Stock

Holley 750 Cfm Aluminum Street Hp Mech Sec

  • Optimized street/strip calibration for outstanding throttle response and drivability.
  • Contoured venturri inlet offers balanced airflow for increased horsepower.
  • Screw in air bleeds for precision tuning capabilities.
  • Four corner idle for precise idle control.
  • Mechanical secondaries for awesome tire turning performance.
Check Stock