The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS

  • Make sure this fits. by entering your model number..
  • Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
  • Includes: Gearbox Halves w/Idler Gear Shaft - Gray (Part # 3691A) Input/Slipper Shaft w/ Spring Pin (Part # 3793) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 3) 20 Fiber Washers - 5x8mm (Part # 1985) Planetary Gear Differential & Steel Ring Gear (Part # 2388X) 22T Top Steel Drive Gear (Part # 3195) Steel Idler Gear - 30T (Part # 3696) 6 Button Head Machine Screws - 3x23mm Hex Drive (Part # 2591) 6 Button Head Machine Screws - 3x20mm Hex Drive (Part # 2580) 6 Flat Head Hex Dri.
  • Part number(s) included (in factory packaging): 3691A 3793 5116 1985 2388X 3195 3696 2591 2580 3931.
Check Stock

Lisle 58500 Hook for Shaft/Seals , RED

  • Removes cam shaft and crank shaft seals without damage to the shaft.
  • Fits idler pulleys requiring 13mm, 14mm, 15mm, 16mm, 18mm, 19mm hex and both 3/8" and 1/2" square drive sizes.
  • For more information check the main Lisle tool- 58430.
Check Stock

iBroPrat 2 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug

  • 【FIT】For trailer idler hub 5 on 4-1/2" for 3,500 lbs trailer axle..
  • 【WELL PACKING 】The parts are individually packed in bubble bags.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box..
  • 【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 32pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 2 DUST CAPS & 4 SEALS..
  • 【HIGH QUALITY】The hub is made of high quality carbon steel.Paint the surface to prevent rust.8.6 pounds also shows how heavy it is..
  • 【SIZE & QUANTITY】1PCS Hub(5 bolt 4.5 for 3500lb), 1PCS L44649 outer bearings (I.D: 1-1/16''), 1PCS L68149 inner bearings (I.D: 1-3/8''), 5PCS Lug nuts (1/2''-20 thread), 1PCS Washer(I.D: 1"), 1PCS Spindle nuts(I.D: 1"), 1PCS Cotter Pins(L: 2.25"), 2PCS Dust cap (O.D: 1.98''), 2PCS Rubber Plug (2.56" O.D - 1.72" I.D). Please check the imag....
Check Stock

MAYT-1 Dryer Maintenance Kit, Contains Dryer Rollers,Shafts, Belt, Idler Pulley, ( 303373, 33002535, 12001541, 6-3700340 )Replacement for Maytag, Whirlpool,Magic Chef Dryers.

  • MAYT1 Dryer Maintenance Package Contains Includes belt, idler pulley, 2 drum rollers, 2 shaft kits.
  • This part works with the following brands: Whirlpool, Roper, Admiral, Maytag, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, KitchenAid, Caloric & Ikea..
  • 33002535 Dryer Drum Belt. This drum belt is approximately 5/16″ wide x 91-5/8″ long. This dryer drum belt is flat, and has 5 ribs and 4 grooves..
  • Two 303373 drum rollers, two 3-12948 Shafts, WP312535 washers, “C” clamp, a fiber washer and with nut..
Check Stock

Detroit Axle - 4WD 8-Lug Front Axle + Wheel Hub Bearing + Upper Control Arm Ball Joints Suspension Kit Replacement for Silverado Sierra 2500 HD 3500 Hummer H2

  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front CV Axle Drive Shaft + 2x Front Wheel Hub & Bearings + 2x Upper Control Arm w/ Ball Joints + 2x Lower Ball Joints +2x Sway Bars + 4x Inner and Outer Tie Rods + 2x Idler Arm & Pitman Arm + 1x Idler Arm Bracket.
  • Hub Specifications: Position: Front Left and Right | Drive: 4WD | Lugs: 8 Bolts | ABS Type: Sensor Wire | Flange: 4-Bolt Square.
Check Stock

Timken Tapered Roller Bearing Cone - NP007430

  • Brand New Input Shaft And Reverse Idler Bearing For Bert Transmissions (Bert Part # 45).
  • Caged Needle Bearing Measures .750" I.D. X .950" O.D. X 1.000" Long.
  • Bert Transmissions Are Primarily Used In Circle Track Race Cars.
  • Including Modifieds (IMCA, UMP, USMTS, Etc.), Late Models, Street Stocks (Depending On Track Rules), And Many Others.
Check Stock

iBroPrat 1 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle

  • 【FIT】For trailer idler hub 5 on 4-1/2" for 3,500 lbs trailer axle.Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle..
  • 【WELL PACKING 】The parts are individually packed in bubble bags.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box..
  • 【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 16pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 1PCS DUST CAPS & 2PCS SEALS..
  • 【HIGH QUALITY】The hub is made of high quality carbon steel.Paint the surface to prevent rust.8.6 pounds also shows how heavy it is..
  • 【SIZE & QUANTITY】1PCS Hub(5 bolt 4.5 for 3500lb), 1PCS L44649 outer bearings (I.D: 1-1/16''), 1PCS L68149 inner bearings (I.D: 1-3/8''), 5PCS Lug nuts (1/2''-20 thread), 1PCS Washer(I.D: 1"), 1PCS Spindle nuts(I.D: 1"), 1PCS Cotter Pins(L: 2.25"), 2PCS Dust cap (O.D: 1.98'....
Check Stock

Permatex 27200 Hiigh Temperature Threadlocker Red, 10 ml

  • Exclusive formulation for newer engines and high performance applications that require extreme temperature resistance.
  • Prevents bolts and press fits 0.375 inch to 1 inch from loosening due to shock, vibration and heat stress.
  • Suggested Applications: Camshaft sprocket bolts, crankshaft bolts, idler bearings, press fit filler tubes, transmission input and output shaft threads, ring gear or shock bolts.
Check Stock

Primeswift Upgraded DC93-00634A Dryer Idler Pulley Assembly with Silent Dual Ball Bearing,Bracket Replacement for Samsung AP6038887 PS11771601 DC96-00882C

  • [Parts Number]:Replacement dryer idler pulley assembly DC93-00634A for Samsung.
  • [Product Highlights]:This improved upgraded style idler assembly DC93-00634A replacement has a higher durability and long-lasting performance than original part,and the silent dual roller bearing keeps your Samsung dryer no any noisy in working.As well as provides a smooth spin and proper tension on the dryers motor keeping your dryer in top working order.
  • [Directly Replaces]:DC93-00634A, AP6038887, DC96-00882C, DC96-00882B, PS11771601, B06XKB5FS.
  • [Fixes Possible Symptoms]:Dryer not spinning | Loud noise | Bearing went bad and ruined the shaft.
  • [About Us]:Primeswift is a worldwide leading supplier and distributor of aftermarket appliance and outdoor parts.Our goal is to provide our customers with quality aftermarket parts that meet or exceed OEM specifications at competitive prices.
Check Stock

Proforged 102-10049 Idler Arm

  • 1,000,000 MILE WARRANTY. You can install our idler arms with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • CRAZY STRONG IDLER ARMS. Proforged idler arms are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance idler arms: Proforged..
  • WHAT IS AN IDLER ARM? A idler arm is part of your vehicle’s steering system - it connects to your center link for support, pivoting as your wheels turn. Idler arms ....
Check Stock

Proforged 102-10074 Idler Arm - Power Steering

  • 1,000,000 MILE WARRANTY. You can install our idler arms with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • CRAZY STRONG IDLER ARMS. Proforged idler arms are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance idler arms: Proforged..
  • WHAT IS AN IDLER ARM? A idler arm is part of your vehicle’s steering system - it connects to your center link for support, pivoting as your wheels turn. Idler arms ....
Check Stock