Categories

Best Idler Wheel

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • ... under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel and φ99 / 148 Gyre Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

B Blesiya 4 Pieces Black 66cm Robot Modified Replacement Rubber Track DIY RC Car Drive Parts Kids Educational Toy

  • Solid but Cheap: Driving wheel is stainless steel, and the track is engineering plastic..
  • Perfect Design: Chain links can be separated for reuse in other projects. (Note: When you need to separate the chain links, you need a paper clip or similar tool.) A pair of driving wheels provide the drive system for tank treads, Not including idler wheels..
  • Quickly DIY: This track and wheel kit is very suitable to DIY a remote control robot car chassis quickly, One just find a set of frame, then can easily to assemble a roboitc moving platform..
  • Length*Width: 95cm*4.1cm, the length can be adjusted on its own..
  • Packing: 2 * plastic crawlers, 4 * gear pieces and some components. (4 * The gear piece forms two driving wheels) Idler wheels and paper clips (or similar things) need to be purchased or prepared by yourself..
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • ... under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel and φ99 / 148 Gyre Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • ...nd any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This heavy-duty rebar cutter bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending or cutting rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • ...nd any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This heavy-duty rebar cutter bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending or cutting rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

Dryer Repair Kit Compatible With Samsung Dryer Belt Maintenance Kit Include Roller DC97-16782A Indler Pulley DC93-00634A Belt 6602-001655 Replace AP5325135 AP4373659 AP6038887 PS4221885 PS4133825

  • ❤- THE KIT INCLUDE: 4 x DC97-16782A Dryer Roller, 1 x 6602-001655 Idler Belt and 1 x DC93-00634A Idler(include 1pc screw).
  • ❤ DC97-16782AROLLER , replacement EAP4221885, PS4218839, EAP4218839,2027851, DC97-07523A, DC97-07523B, PS4221885, DE7523, AP5325135,etc 6602-001655 BELT ,replacement AP4373659, 6602-001314, 1935594, 6602-001314, EAP4133825, PS4133825,etc.
  • ❤ DC93-00634A IDLER , replace AP4373659, 6602-001314, 1935594, 6602-001314, EAP4133825, PS4133825,etc.
  • ❤ COMPATIBLE WITH SAMSUNG MODELS :DV203AES, DV203AEW, DV203AGW, DV210AEW, DV218AGW, DV219AEB, DV219AEB, DV219AEW, DV219AEW, dv216bec, DV42H5000EW/A3 and DV40, DV41. DV42, DV43, DV45, DV51, DV52, DV52).It works on almost all samsung dryers.
  • ❤ 100% QUALITY ASSURANCE！We can ensure its quality!If you are worried about the installation inconvenience, peculiar smell of the roller, the bearing capacity of the idler wheel arm, the falling off of the white pulley and other problems, we can make you rest assured.If you encounter a dry roller that is still working but beeps.
  •  the drum rotates intermittently but makes a dull sound.
  •  the drum does not rotate at all. The dryer shakes. etc. Please choose us!.
Check Stock

Detroit Axle - 17pc Front Upper Lower Control Arms, Wheel Hubs, Inner Outer Tie Rods, Center Sway Bar Links, Pitman Idler Arms for 2000-2003 Ford F-150 4WD w/ 3.43″ Bolt Pattern 5 M14 Studs w/ABS

  • Kit Includes:4x Front Control Arms, 4x Front Tie Rods, 2x Front Adjusting Sleeves, 2x Front Sway Bar Links, 2x Front Wheel Hub & Bearings, 1x Front Center Link, 1x Front Pitman Arm, 1x Front Idler Arm.
  • Flange Type: 3-Bolt Triangular | Lug Count: 5 | Abs Type: Sensor Wire.
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality.
Check Stock

Dryer Repair Kit for Samsung Belt idler pulley Roller maintenance Replacement - 6602-001655 Belt & DC93-00634A Dryer Idler Pulley & 4 DC97-16782A Dryer Drum Rollers Replaces DC97-07523A DC97-07523B

  • ✅[Package Includes] 4 x DC97-16782A Drum Rollers, 1 x DC93-00634A Idler Pulley, 1 x 6602-001655 Drive Belt..
  • ✅【Ideal Replacement】: Want new samsung dryer maintenance kit that matches the original, for far less than going back to the dealership? This dryer wheels repair replacement was specifically designed to look and function the same as the original roller bearing kit on Samsung Dryer. While this is NOT a genuine Samsung parts, it is a direct replacement and it will appear, fit and work like the factory part..
  • ✅【UPGRADED Dryer Repair Kit for Samsung】: DC97-16782A Drum Roller – Includes roller wheel and roller axle. wear-resisting black rubber make the drum rotate more stable. DC93-00634A Idler Pulley – Including the idler arm and the idler pulley. Double ball bearing provides durable belt tension and smoother roller rotation. 6602-001655 Drive Belt – Tooth rubber with pliable and Double thickness – make the movement smooth and noiseless..
  • ✅【Fitment】: Fit for most Samsung clothes dryer model, also fit for Kenmore dryer 40289032010 40289032011 40289032012 40299032010 40299032011 40299032012. For more Samsung dryer model, please check the The last two pictures. If you are not sure if it is compatible wi....
Check Stock

Idler Pulley for Poullan Ayp Dixon Craaftsman Husqvaarna 532173437 173437 165888

  • Idler sprockets, flat idlers and idler bushings contain sealed ball bearings and an integral shaft for mounting to adjustable idler brackets.
  • Lubrication and maintenance are not required.
  • Idler assembly may consist of: idler sprocket and bracket, flat idler and bracket, standard sheave or sprocket used with an idler bearing and idler bracket.
  • Package Dimensions: 17.78 L x 19.05H x21.082W(centimeters).
Check Stock

Detroit Axle - 4WD 8-Lug Front Axle + Wheel Hub Bearing + Upper Control Arm Ball Joints Suspension Kit Replacement for Silverado Sierra 2500 HD 3500 Hummer H2

  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front CV Axle Drive Shaft + 2x Front Wheel Hub & Bearings + 2x Upper Control Arm w/ Ball Joints + 2x Lower Ball Joints +2x Sway Bars + 4x Inner and Outer Tie Rods + 2x Idler Arm & Pitman Arm + 1x Idler Arm Bracket.
  • Hub Specifications: Position: Front Left and Right | Drive: 4WD | Lugs: 8 Bolts | ABS Type: Sensor Wire | Flange: 4-Bolt Square.
Check Stock

J.W. Winco 100KNA1 Wheel, Forged Tempered Steel, Surface Lightly Oiled

  • 【4" Drive Wheel】4" drive wheel is CNC machined with a 5/8 inch bore. The bore is equipped with a 3/16 inch keyway. The surface of the wheel is crowned to ensure the belt don't jump off the wheel..
  • 【3" Tracking & 2" Idler Wheel】The heavy duty bearings fitted back to back in each wheel for max bearings life. And there is a spacer between the bearings to prevent over-tightening..
  • 【Simple Installation】Easy and reliable mounting method. This belt grinder wheel set is easy to carry and use with small and lightweight. The bearings can be easily replaced when worn. The knife grinder wheel set can meet your needs and work great in grinding metals, wood, acrylic and other materials. It is widely used in parts factories, building materials factories, etc., perfect for tool polishing..
  • 【Superior Material】The belt grinder wheel is made from top quality Aluminum, warp-proof, impact resistance, sturdy and durable. High precision and hardness ensure long-term reliable service..
  • 【100% Satisfaction Guarantee】If you're not satisfied with this Belt Grinder 2x72 Wheel Set, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy conf....
Check Stock

Belt Grinder 2x72 Wheel Set Knife Grinder 4 Drive 5/8 bore 4 Track 2 Idler 4,5/8-4 - 2

  • CNC Machined Aluminum Wheel set for Belt Grinders.
  • 3 x Heavy duty ½” Bearings fitted Back to Back in each wheel for max bearings life.
  • 3” long, ½” Bolt (Not included) is required to mount idler and tracking wheels.
Check Stock

Belt Grinder 2x72 Wheel Set Knife Grinder 5' Drive 5/8' bore 4' Track 2' Idler (5' 5/8-4' - 2')

  • CNC Machined Aluminum Wheel set for Belt Grinders.
  • 3 x Heavy duty ½” Bearings fitted Back to Back in each wheel for max bearings life.
  • 3” long, ½” Bolt (Not included) is required to mount idler and tracking wheels.
Check Stock