Categories

Best Igniter System

Maxmoral 2PCS AA Battery Push Button Igniter Ignitor Cap Gas Fire Pit Ignitor Caps Replacement for Spark Generator Gas Grill

  • Made of high-quality plastic, reusable, lightweight, safe, non-toxic, odorless, durable..
  • The old igniter can be easily replaced or repaired with a new lighter cover. An essential accessory for the barbecue grill, practical and practical..
  • The button switch of AA battery pulse igniter is suitable for standard AA battery igniter (one outlet to six outlets are used for AA battery igniter,....
  • Igniter cover size, practical for grill, practical AA igniter button cover, size 3.12 cm / 1.23 in..
  • Package includes: 2 x AA igniter button caps..
Check Stock

Weber 66354 Genesis II E-310/315 Igniter Kit

  • Genuine Weber part 66354 Igniter Kit for Genesis II E-310/315 (2017 and newer)..
  • Includes: Instruction sheet (1) Igniter module (1) Igniter electrode w/wire, 27", yellow (1) Igniter electrode w/wire, 36", black (1) Igniter....
Check Stock

ATKKE 67726 Igniter Kit for Weber Genesis 300 Series Electronic Ignitor Kit with Side-Control Battery Ignition Starter Part 2007 Models Gas Grill for Weber Genesis 310 320 Series Grills Replacement

  • GENESIS 300 SERIES ELECTRONIC IGNITOR KIT - Genesis 300-E and 300-S Series (Model Year 2007) ignitor kit. The distinctive part in this kit is the....
  • PACKAGE INCLUDED - This igniter kit includes one white ceramic U-shaped spark device with electrodes and wires, one electronic igniter module and one....
  • HIGH QUALITY MATERIAL FOR DURABLE AND LONG-LASTING - This igniter kit is made of premium plastic, metal and ceramics. All the components are durable....
  • AN EFFECTIVE WAY TO RE-ACTIVE YOUR GAS GRILL - Nothing beats using a gas grill to make quick and delicious foods while the ignition system plays an....
  • EASY TO INSTALL - The installation is simple and easy. Please prepare a screwdriver in advance. Just remove a couple of screws then you can remove the....
Check Stock

Uniflasy 7629 Grill Igniter Kit for Weber Genesis 330 Gas Grills with Front Mounted Control Panel 2011 - Newer Electronic Igniter Electrodes Ignitions Kit for Weber Genesis 300 Series 65946

  • 【Fit Perfectly】► Grill Ignitor for Weber Genesis 330 gas grills (front mounted control panel) 2011 & Newer. ► Fits Genesis E330, EP330, S330,....
  • 【Also Fits】- Grill Igniter for Weber 56514, 6511001, 6511301, 6512001, 6519009, 6519399, 6522301, 6531001, 6532001, 6532301, 6550001, 6570001,....
  • 【Uncompatible】- This item is NOT compatible with Genesis II series grills. Please check and compare dimensions with your original parts before....
  • 【Package】- Including 4 wires, 4 electrode igniters, 1 Instruction, 4 wire clips, 4 washers. It is a electronic ignition tools to reignite an gas....
  • 【Ignite Every Time】- The GS4 system includes a new ignition system that's ensured to ignite every time 【For the Igniter not ignite 】 -- The....
Check Stock

Supco Gas Igniter for Stove Range, Replacement Part No. SGR403 (1-Pack)

  • ROUND GAS RANGE IGNITER – This Supco gas igniter is a direct replacement for hundreds of OEM numbers, including GR403 (GEM), WB2X9154 (GE), 5304401265 (Electrolux), 309155 (Maytag), 3196447 (Whirlpool). Igniter is 3.5 in. long.
  • HIGHEST QUALITY PARTS – The SGR403 gas igniter meets or exceeds OEM specifications and will not overdrive the gas valve on your range like some universal replacements will.
  • LONGER LIFE – With the longest MTBF (mean time between failure) in the industry, this round gas range igniter is the best choice for replacement parts.
  • TESTED FOR SAFETY – Used with 3.2 to 3.6 amp rated gas safety valves | CSA Approved and UL Approved.
  • ALL HIGH TEMPERATURE – Ceramic wire connectors, stainless steel shield, and MGT wire leads use on this gas igniter.
Check Stock

Universal Ignitor, 120V Silicon Nitride Hot Rod Ignitor Replacement for Silicon Carbide Igniters of Gas-Fired Forced-air Furnaces, Water Heater and Boiler, Nitride Heater Igniter

  • Compatible Models: This silicon nitride igniter compatible with Cook Top and Range, Cook Top, Furnace, Gas Ignition, Hot Surface Igniters, Infrared light source, Warm Air Movement, Pool Heaters and Boilers, Process Machinery, Special FX, Water and Parking Heaters, etc..
  • Function: When your stove won't light, igniter not glowing, cracked, burned out, cracked, damp, etc., or the igniter has no continuity, the multimeter is not reading or changing small(if the igniter has continuity, then your multimeter should read between 9 - 17 ohms), and you have to replace the nitride igniter.
  • Materials: Consists of stainless steel 304 bright finish bracket, 1.97" nitride heating element, 1.18" ceramic insulator body, non-glazed 95% aluminia polished finish, 15-3/4" 20AWG/ UL 10362 specification 250°C temperature-resistance cable.
  • Hot Side Ignitor/Igniter Specification: Rated voltage: AC 120V +/- 10%-15%, 50/60HZ, Cold resistance: 9-17Ω, Rated power: 150W, Temperature at 120v ± 0.5v. 60HZ at 17 sec ≧1180 ℃, Anti-overvoltage ability: igniter energized for 1 minute -132V. Igniter current not allowed to increa....
Check Stock

Swimables Igniter with Gasket Kit Replacement for Pentair MasterTemp/Max-E-Therm Pool and Spa Heater 77707-0054

  • Made To Work With Select Pentair Heater Models: The Igniter with Gasket Kit is compatible with Pentair MasterTemp Heaters and Sta-Rite Max-E-Therm....
  • Identifying the Problem: Open up your Pentair Mastertemp or Starite Maxetherm Heater and locate the Igniter. The igniter can be found via the heater's....
  • Install with Ease: After making sure the Pentair Igniter is damaged, proceed to changing them out. The igniter is held in by two screws. Take off the....
  • Exceptional Quality: These aftermarket replacement parts for the Pentair Heaters are made by Swimables and are of the same or better quality compared....
  • 100% Satisfaction Guarantee: Buy with confidence, as our premium quality Pentair Heater Igniter Replacement is built to last, and if you're not....
Check Stock

HZ-MONSTAR Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit with Igniter Assembly Fire Pit Igniter, Push Button Ignition Kit for Gas Grill, Heater, Fire Pit

  • [APPLICATION] --- The fire pit gas control valve kit suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater (max BTU rating: 50000 working pressure 65mbar)..
  • [UPGRADED-BUTTON IGNITER] --- The upgraded button igniter also greatly reduces the time required to generate sparks. The fire pit igniter using pop-up switch, more to meet people's needs..
  • [HIGH QUALITY] --- The fire failure safety control valve kit are made of brass material with heavy-duty construction for durable use..
  • [SPECIFICATION] --- Low Working Pressure Max 1/2 PSI（65mbar）, CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread. And length of thermocoupler 600mm Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000). Platic Black Bakelite Knob Diameter 38mm and "D" Insert for Valve 6.0-6.1mm..
  • [Service Warranty]---We offer 1 year warranty. If it fails, feel free to contact us. we will reply within 24 hours..
Check Stock

GASPRO Ignitor Kit for Weber Spirit E-210 E-310 200 & 300 Series Front-Mounted Control Easy to Install

  • 【Works Perfectly】 Replacement part for Weber Spirit 200 & 300 series (with front-mounted control), including E/S-210, 220, 310, 315, 320, 330....
  • 【Durable & Long-Lasting】 Constructed from high quality material for longevity.
  • 【Great Value】The igniter as good as the original but half the price.
  • 【Easy to Install】With easy to follow instruction, it takes only a few minutes to install.
  • 【Complete Set】 Includes 1 igniter electrode, 1 igniter button, 1 igniter module, 4 igniter wire clips, 1 instruction, and more. (AAA battery is....
Check Stock

Aupoko Double Ignition Kit Electronic Igniter, Propane Gas Grill Igniters with Double Ignition Electrode, 450 mm High Spark Plug Wire, Fits for Gas Fireplace & Oven & Heater & Kitchen lgniter

  • WIDE APPLICATION --- The electronic igniter with high spark plug wire is suitable for any gas appliance and can be used for grill, heater, water heater etc..
  • EASY TO INSTALL --- This electronic igniter for gill is easy to operate, sparking distance is 2-4 mm, one piece of two outlets igniter and double ignition spark..
  • PREMIUM QUALITY --- This BBQ electronic igniter is a piezo electric igniter, external material is PP plastic, with firm construction for durable use..
  • DIMENSION --- Spark wire length 450mm, temperature resistance 200 ℃..
  • 1 YEAR WARRANTY --- This double spark plug igniter complies with 1-Year limited warranty, should be there any question, please feel free to contact us..
Check Stock

Weber 902 Snap-in Igniter Assy

  • Fits Most Gas Grills After Model Year 2001, All Stopwatch Engineered Grills Quick Assembly..
  • This includes: (1) Snap-fit igniter (1) Igniter chamber assembly (1) Instruction sheet.
  • Note: If your Genesis Silver C or Genesis Gold C model grill has a single igniter that lights the main grill as well as the side burner, this igniter....
Check Stock

GASPRO Ignitor Kit for Weber Genesis E/S-310 320 Genesis 300 Series Front-Mounted Control Gas Grill Easy to Install

  • 【Works Perfectly】 Replacement part for Weber Genesis 300 series (with front-mounted control), including E/S-310, 320, EP-310, 320, CEP-310, 320....
  • 【Durable & Long-Lasting】 Constructed from high quality material for longevity.
  • 【Great Value】The igniter as good as the original but half the price.
  • 【Easy to Install】With easy to follow instruction, it takes only a few minutes to install.
  • 【Complete Set】 Includes 3 igniter electrode, 1 igniter button, 1 igniter module, 4 igniter wire clips, 4 stainless steel gaskets, 1 instruction....
Check Stock

Compatible Oven Igniter for Kenmore / Sears 7917898810, Frigidaire FGF326ASE, Kenmore / Sears 79075721991, Frigidaire TGF334BCWF Range

  • Compatible Oven Igniter for Kenmore / Sears 7917898810, Frigidaire FGF326ASE, Kenmore / Sears 79075721991, Frigidaire TGF334BCWF Range.
  • Compatible with Part Number 5303935066 Oven Igniter.
  • SAVE MONEY! Don’t spend hundreds of dollars replacing your range when all you need is a replacement oven igniter..
  • EASY TO INSTALL! If you are a DIY person or have experience fixing your oven, it is pretty easy to replace your old oven igniter. If not, your local appliance repair shop can do it for you!.
  • FITS PERPECTLY! This aftermarket oven igniter is manufactured to fit the listed models. Please make sure to check your original part to confirm that you are buying the correct product..
Check Stock