Categories

Best Ignition Leads

Performance Tool - Digital Advance Timing Light (W80587) Engine

  • Display engine speed up to 9, 000 RPM, and ignition spark advance from 0-90.
  • Professional set initial and advance timing to obtain total timing and peak performance.
  • Super bright Xenon flash, and a high vis LED display.
  • Designed for precise tuning and diagnostic work. Tough ABS shell, 60 in. Inductive Pickup leads and works with 12 volt systems.
Check Stock

HANGKAI 3.6HP 2 Stroke Heavy Duty Outboard Motor Boat Engine w/Water Cooling System

  • Easy to Use: Red reset lever easily shows user when circuit has been broken.
  • Ignition Protection: Protects your trolling motor from electrical damage, prevents excessive current and stops power surges.
  • Emergency Power Cut Off: Red reset button can be used to quickly disconnect power from the motor in case of emergency.
  • 1/4" stainless steel studs for battery leads.
Check Stock

2 Coil Ignition Magneto Stator Plate for 50 70 90 110 125cc Taotao Kazuma SSR Baja ATV Quad Dirt Kick Bike 4 Wheeler,Magneto Flywheel Puller for Yamaha Honda Kawasaki Suzuki Scooter Dirt Bike

  • Compatible with 50cc 70cc 90cc 110cc 125cc dirt bike pit bike atv quad go kart ATVs and quads.Comes with 2 coil and 6 wires(red,yellow,white,blue/white,red/green,white/green)(including 1 removable free wire).
  • Package include:1 x ignition stator magneto plate+24mm&27mm Magneto Flywheel Puller.24mm right hand thread use for---most GY6 50 4 Stroke Scooter Moped ATV，27mm left hand thread use for---most GY6 125 150cc Scooter and other 125cc Motorcycles.
  • The stator included a 12v Lighting coil with leads. Just plug in your 12V headlight or use it to charge a battery. This assembly is perfect for replacing your broken trigger assembly which happens often when the Chain comes off and breaks off the ignition trigger.Get your bike running again ,you could also use this to convert a old Points motor over to electronic ignition although you still need to buy a CDI box..
  • 2 coils, 6 wires: green and white, white, Yellow, red and black, blue and white, red and green.2 Coil Ignition Magneto Stator Plate fit for XR/CRF 50 XR/CRF 70 Z50R(1988-1999) ZB50 and most pit bikes with 50cc, 70cc, 90cc, 110cc & 125cc motors(without electric starter).To replace this part, you need to remove the flywheel. You need a 27mmx1mm backward thread flywheel pull....
Check Stock

Keep Your Boat Afloat with USS Bilge Pump Switch – JR. - 12 Volt. USS Float Switches, Simply the Best automated bilge switch available

  • Ignition protected.Power on indicator light on top..
  • Dimensions: Height – 6 1/4” Diameter – 2 ½”.
  • Current rating- 15A @ 12V. Internal relay rated at 30A..
  • Long leads with adhesive wall heat shrink butt-splice connectors installed..
  • Positive action, no time delays or electronics.
Check Stock

Sunpro Actron CP7853 Remote Starter Switch for 6V and 12V Automotive Starting Systems Black

  • Actron's Remote Starter Switch allows one person to start or crank the engine from under the hood.
  • Ideal for a compression test or bumping the engine onto Top Dead Center (TDC) timing position for valve, distributor, or camshaft adjustment.
  • Features a power tool type trigger switch.
  • heavy-duty, 5-1/2 foot long neoprene leads, and 1/2 inch opening clips with....
  • Designed to replicate function of original vehicle ignition switch - 10-amp rating.
  • includes comprehensive hook up instructions with illustrations for safe and correct hookup (incorrect hookup can exceed....
Check Stock

JEGS Self-Powered Timing Light | Uses Two D-Cell Batteries | Work Light Function | Super Bright Xenon Bulb | Self-Contained Design Eliminates Battery Leads

  • BUILT-IN WORKLIGHT FUNCTION by flipping the switch to turn a light on.
  • SELF-CONTAINED DESIGN eliminates the need for battery leads.
  • USES 2 D-CELL BATTERIES for simple connection and use.
  • MADE OF IMPACT-RESISTANT PLASTIC for long life.
  • INDUCTIVE PICKUP AND SUPER BRIGHT XENON BULB takes the hassle out of setting ignition timing.
Check Stock

High Performance Racing Ignition Coil for GY6 50cc 150cc 125cc ATV Moped Scooter Parts with 6 Pin CDI 3 Electrode Spark Plug - Scooter Ignition Coil Moped Performance Parts by TOPEMAI

  • High Performance Racing Ignition Coil for GY6 50cc 150cc 125cc 4-stroke Engines Scooters, ATVs, Mopeds, Quad, Pit Bikes, Dirt Bikes.Fit Honda TRX200 TRX200D TRX200SX TRX250 ATV..
  • High Performance Racing Ignition Coil Compatible with these scooters:TaoTao, Buyang, Roketa, Coolsport, NST, BMX,Sunl, AIM-EX, Baja,Kazuma,Panterra, Kymco, Carroll Stream Eagle etc..
  • GY6 Ignition Coil AKA 50CC Ignition Coil,Moped 50CC Ignition Coil,50CC Scooter Ignition Coil,Ignition Coil 50CC,Taotao 50CC Ignition Coil,50CC GY6 Ignition Coil,Kazuma 50CC Ignition Coil,150CC Ignition Coil,GY6 150CC Ignition Coil,Ignition Coil 150CC,150CC Scooter Ignition Coil,Taotao 150CC Ignition Coil,GY6 High Performance Ignition Coil,Gy6 150CC Ignition Coil,Ignition Coil Gy6,50CC GY6 Ignition Coil,Racing Ignition Coil GY6..
  • This CDI is 6pins,it works with the GY6 type plug on it,with an AC ignition system.Plug and Play installation makes installation a breeze! If your CDI has the same plug,this will work for you!GY6 CDI Box AKA GY6 performance CDI,GY6 Racing CDI,50CC CDI,CDI 50CC,50CC CDI Box,CDI 50CC scooter,CDI Box for 50CC scooter,CDI 150CC,CDI 150CC scooter,CDI Box 150CC,CDI Racing 150CC..
  • This spark plug is a high peformance racing 3 electrode spark plug.Gy6 150CC Spark Plug AKA ....
Check Stock

Hipa 30500-ZE1-073 Ignition Coil for Harbor Freight Predator 212cc 6.5HP Go Kart OHV 212cc 60363 68121 69727 68120 94187 96500 96549 Honda GX110 GX120 GX140 GX160 GX200 Lawn Mower

  • Ignition coil replaces 30500-ZE1-033 30500-ZE1-063 30500-ZE1-073 30500-ZE1-013 30500-ZE1-053 30500-ZE1-043.
  • Baja Warrior Heat Mb165 Mb200 163cc 196cc 6.5HP Mini Bike.
  • Compatible with Harbor Freight Predator 212cc 6.5hp Go Kart OHV Engine.Please verify your engine model and part numbers before purchasing to ensure you receive the correct parts..
  • Compatible with Honda GX110 GX120 GX140 GX160 GX200 5HP 5.5HP 6.5HP Engine, Honda EG1400 EZ1400XK1 EG2200X EG2500XK1 EZ2500 generator, WP30X water pump.
  • Mounting Hole Distance (From Center To Center): 2-1/4-inch； GX200 Ignition Coil, GX160 Ignition Coil,GX120 Ignition Coil,Honda GX120 Ignition Coil,Honda GX160 Ignition,.
  • GX200 Ignition Coil, GX160 Ignition Coil,GX120 Ignition Coil,Honda GX120 Ignition Coil,Honda GX160 Ignition,Ignition Coil GX160,Honda GX160 Ignition Coil,Ignition Coil Honda GX160,Honda GX160 5.5 Ignition Coil,Honda GX200 Ignition Coil,Ignition Coil Honda GX200,Stens 440-105,Honda 30500-ZE1-073.
Check Stock

Ignition Coil For Honda GX120 GX160 GX200 Engine Generator Rototiller 4589693 30500-ZE1-073 with Spark Plug Air Filter by TOPEMAI

  • Ignition Coil Fits for Honda GX110 GX120 GX140 GX160 GX200 5.5 6.5 HP Engine Generator Lawn Mower Motor.Also for Rototiller 4589693,Stens 440-105..
  • GX200 Ignition Coil Replace manufacturer part number:30500-ZE1-073,30500-ZE1-033, 30500-ZE1-063..
  • GX200 Ignition Coil AKA GX160 Ignition Coil,GX120 Ignition Coil,Honda GX120 Ignition Coil,Honda GX160 Ignition,Ignition Coil GX160,Honda GX160 Ignition Coil,Ignition Coil Honda GX160,Honda GX160 5.5 Ignition Coil,Honda GX200 Ignition Coil,Ignition Coil Honda GX200,Stens 440-105,Honda 30500-ZE1-073..
  • Package includes 1 ignition coil + 1 spark plug+1 air filter.GX120 Air Filter Replaces # 17210-ZE0-821 17210-ZE0-505,AKA Honda GX120 Air Filter,GX160 Air Filter,GX140 Air Filter,GX200 Air Filter..
  • Feel free to contact us by emails for solution if you have any problems..
Check Stock

87-88107A5 Boat Ignition Switch with Key Boat Push to Choke 6 Wire Base Ignition Key Switch for Mercury with 2 Keys 6 Wire Connectors | for Mercury Push Choke Ignition

  • [100% Brand New Boat Ignition Switch with Key] High quality boat ignition switch with key 6 wire is made of marine-grade glass-filled polyester construction, durable in use. Boat Ignition Key is non-conductive housing eliminates potential shorts. Boat key switch with choke has maximum corrosion protection - eliminates oxidation. Ignition Switch Boat Push to Choke 6 Wire Base Mercury - inner seal between cylinder lock and contact plate.
  • [Fitment] 6 wire boat ignition fits for Mercury applications w/Potted Wires replacing OE#'s Listed - 6 wire marine ignition switch replaces for Mercury part number: 87-88107 , 87-88107A5, 7-1155. Boat Ignition Switch with Key 6 Wire fits for most Mercury Outboard Motors 1994 and Later using.
  • [Specification] Push choke ignition switch has 3 Position: Off - Ignition - Start, includes 2 keys, fits for Side Mount Controls or Panels up to 5/8". Boat Ignition Switch with Choke rated Up to 30 amps 12V. Ignition Key Switch with Push to Choke function, use with Magneto Ignition.
  • [Warranty] 1x Ignition Key Switch, 2x Key - we offer 24 month warranty. If you have any other questions ....
Check Stock

175974 Boat Key Switch Ignition and Safety Lanyard Assembly Replacement for OMC Johnson Evinrude Motor 40-200HP Outboard Motor Replace 5005801 357868

  • 【AUTOMOTIVE REPLACEMENT IGNITION STARTER SWITCHES】The mercury outboard ignition switch is made of quality material. Make it reliable and wear-resistant to use..
  • 【FITMENT FOR BOAT KEY LANYARD & IGNITION SWITCH】The ignition switch and key assembly with lanyard replacement for Johnson ignition switch, for evinrude ignition switch, for omc ignition switch. Quality boat kill switch for your evinrude motor..
  • 【REPLACE NUMBER FOR BOAT KILL SWITCH IGNITION】The marine ignition switch with key boat ignition key replacement number - 175974 / 5005801 / 357868. Designed to directly fit the original factory oem one..
  • 【FEATURE FOR MARINE KEY SWITCH】The mercury outboard replacement key motor assembly is easy to install, strong and flexible enough to use. Plug and play, direct fit for the oem ignition..
  • 【BUY WITH CONFIDENCE】You'll get 1* tracker boat ignition switch, 1* ignition switch key and 1* kill switch lanyard. Coming with 12-month warranty..
Check Stock

36 x Staedtler Mars Micro Mechanical Pencil Leads 0.5mm in Green, Red and Blue (12 x Leads of Each Colour)

  • 36 x Staedtler Mars Micro Mechanical Pencil Leads 0.5mm Leads.
  • 12 x Blue Leads, 12 x Red Leads and 12 x Green Leads.
  • Easy Erase, Break Resistant Leads. Smooth Gliding Leads with Jet Black Lines.
  • Suitable for use with All Mechanical Pencils.
Check Stock

4.7mm mini 12V instrument cluster Led Bulb ,4.7mm White Blue Red Green LED Lights bulb for cluster LED Lights instrument Dashboard Panel Light

  • ✔ Wide Application Range: Instrument Cluster LED ,Ignition Switch Cylinder LED,Climate Control LED,Radio Controls LED, Steering Wheel Bulb Dash / Indicator Switch LED,Dashboard Cluster LED，Instrument Console LED ,Dash Controls LED,Instrument Cluster LED ,A/C Heater Cluster LED..
  • ✔ Easy Installation:4.7mm 12v Led light bulb are Very Bright,Easy to Use, Energy Saving,Low Power Consumption,Long-Lasting Life..
  • ✔ 4.7mm Clear Mini Led Bulb Build Resistor in it, You Can use it directly in DC12V.Longer Leads are Positive and Shorter are Negative..
  • ✔ Note:Please Verify This is the Right Part Before Ordering.Package Include 10pcs Blue light bulbs,10pcs Whitelight bulbs,10pcs Red light bulbs,10pcs Green light bulbs.
  • ✔ Warranty:It's Perfect for Customers Who are Looking for a Extremely Bright Output,Our Quality are Built To Strict Control Standards..
Check Stock