Categories

Best Impact resistant Puller Tool

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • ...fortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule..
  • 【Great Compression Sleeve Puller Tool】We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right..
Check Stock

VEVOR Carrier & Pinion Bearing Puller Compatible with Dana 30,40,50,60,70, 80, Ford 10.25  Bearings Pinion Puller Tool with 3 Clamshells 45# Steel Clamshell Bearing Puller for Auto Repair

  • ...ith a handy stand, so you can group all the working parts together..
  • Easy to Operate: There is no need for other complex working tools. Firstly, place the main body over the plug and adjust the lower and upper adjusting ring. Secondly, select a proper clamshell and tighten the retaining ring. Finally, you can use an impact gun to remove the bearing..
  • Superior Material: The clamshell bearing tool is made of durable 45# steel, providing good performance in withstanding abrasion, corrosion, and impact. Constructed of high-strength material, it is a robust tool built to last..
Check Stock

Orion Motor Tech 3\ 4\ 6\ 8\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels

  • the 8 in. puller can be used in 4 different positions to deal with both medium and large parts..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
Check Stock

Orion Motor Tech 3\ 4\ 6\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels (GD)

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread.
  • a 4 inch gear puller with a 3" reach and 4" max. spread.
  • and a 6 inch gear puller with a 4.7" reach and 6" max. spread..
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
Check Stock

Pipe Olive Remover Puller Tool, CATUDIY Olive Puller for Compression Sleeve Suitable for Brass Pipes Plumbing Tools with Diameters of 1/2 Inch & 3/4 Inches Ferrule (US Standard)

  • 【Applicable Model】The compression sleeve puller not damage is suitable for brass pipes with diameters of 1/2 Inch and 3/4 Inch..
  • 【Powerful Design】The ferrule puller tool is able to remove used or damaged olives from the copper pipe without damaging the pipe by utilizing compression fittings to lock the inches nut, olive puller can work on air-conditioning pipes.
  • 【Ideal Removal Tools】The compression ring removal tool can increase torque, which is suitable for various tasks -- A handy duck puller tool to remove neatly used or damaged olives.
  • 【Superior Material】This Olive puller for copper pipes fittings puller are made of solid brass with high strength, high hardness, corrosion resistance, wear resistance, high finish, which have long service life.
  • 【Easy Using】The pipe tool can be used easily without checking any manual. Simple operation reduces frustration, saving more time and energy.
Check Stock

Coitak Tile Grout Saw Angled Grout Saw with 3 Pieces Extra Blades Replacement for Tile Cleaning

  • ...It can be used on a kitchen remodel, removing a couple of sections of baseboard, a countertop from some base cabinets, and pulling up a ceramic tile floor. The very edge can also used to pry up the staples..
  • Ergonomic Handle - All our trim puller is built with an ergonomic, comfortable and textured dipped handle. An impact absorbing FPR handle makes it comfortable to hold, though..
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • ...om the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fast solve the problem of compression valves failing with small leaks. Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant..
  • 【2 Ways To Remove】Remove the old compression fitting or the old angle stop.WAY 1: ONLY REMOVE THE FERRULE—Let the ferrule in between the red notched end of the tool (notched clamping ferrule). WAY 2: BOTH REMOVE THE COMPRESSION NUT AND FERRULE—Place red notched end of tool behind compression nut. And then both way1 or way2 all need to: Engage the silver head end in tubing. Hold tool firmly while turning the t-bar handle, the puller tool will automatically pull compression nut and ferrule..
  • 【Gteat Compression Sleeve Puller Tool】We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right..
Check Stock

IWISS Dupont Connector Kit 2.54mm Pitch Single Row Male Headers Dupont Crimp Pins for 3D Printer and FPV Jumper Wire Ribbon Cable

  • Trim Saving - The trim removal tool has a larger, flatter and wider contact area than clumsy traditional tools and features an integrated wedged....
  • Revolutionary Tool - Our Trim Puller is a very beefy tool. The Build-in spring design assists in separating trim from wall freely and quickly. The 15....
  • Durable Pry Bars - Our trim puller are made from 65 Mn steel with black electrophoretic and polished finish which protect against corrosion and give....
  • Multi-Function - Ideal for commercial work, repair and remodel projects where care and precision are needed including cabinets, countertops, flooring....
  • Ergonomic Handle - All our trim puller is built with an ergonomic, comfortable and textured dipped handle. An impact absorbing FPR handle makes it....
Check Stock

HANDLANDY 6 Pairs Reflective Work Gloves for Men & Women, Anti Vibration Gloves

  • Choose the size by the left size chart image.
  • SILICONE PADDED PALM, Shock absorption palm with ultimate grip on wet, oily surfaces.
  • EXCLUSIVE PALM MATERIAL, 28% more abrasion resistant than normal synthetic leather.
  • HIGH-VIS METACARPAL PROTECTION, 80% impact absorption.
  • HIGH-VIS KNUCKLE PROTECTION, 90% impact absorption.
  • HIGH-VIS PENDING FINGER PROTECTION, 79% impact absorption offers sidewall and complete fingertip protection.
  • CUFF PULLER, Get your glove in the proper position faster.
  • Additional Features: Reflective tape on the wrist, Extended neoprene cuff, HIGH-VIS palm and back of hand.
  • Best use, Oil and Gas Drilling, Extraction and Refining, Fracking, Tool Pushing, Mining, Equipment Maintenance, Supervisor.
Check Stock

Prokomon 13 Pcs Embedded Bearing Puller Kit for 6004-6010 6201-6206 6300-6302 Insert Wheel Bearing Removal Tool with 6 Pcs Ball Ended Threaded Puller Adaptors

  • ◇ Embedded Bearing Puller --- The bearing puller is used to dismantle automotive bearings. When a normal puller cannot remove the bearing, using this tool can help you complete the removal task..
  • ◇ Applicable ISO Bearing Sizes ---The wheel bearing removal tool is suitable for ISO bearings of sizes 6004-6010,6201-6206 and 6300-6302..
  • ◇ High Quality Materials --- Bearing puller tools are made of hardened and tempered steel, chemically plated black for excellent corrosion resistance and improved service life, providing you with long service..
  • ◇ Easy To Use --- First choose the right slider, put the slider into the bearing housing ring, rotate it 90 degrees, install the right post, then install the crossbeam and the top screw, turn the screw clockwise and pull out the bearing..
  • ◇ 13 Pcs Set--- Bearing removal tool pack contains centre screw thread cap,6 x ball ended threaded puller adaptors,2xleg extensions,and puller yoke with centre screw and twin arms..
Check Stock

Kaisiking Black Aluminum Suction Cup Car Dent Puller Suction Cup Car Dent Remover Tools for Car Dent Repair, Glass, Tiles, Mirror, Granite Lifting and Objects Moving

  • 【Unique Design】Suction cup lifter is ergonomically designed and has the convenience of single stroke pump operation. One hand buckle design, precise structure, the pull strong and lasting, not easy deformation. Durable aluminum handles and an impact-resistant housing to withstand work site abuse..
  • 【Easy to Use】Car dent puller suction cup is the ideal tool for moving flat objects in any home garage or professional body shop! Just put the dent puller suction cup lifter on a smooth object surface and pull the handle up, so easily move glass, tiles, objects and car dent repair..
  • 【Wide Application】Car dent removal tool can firmly stick to any clean non-porous flat surface. It can move smooth flat object, such as the glass, tiles, mirror, granite, car dent repair and so on. Please make sure that the dent are in the flat surface and should be larger than the bottom suction cup diameter.
  • 【Warm Reminder】Must be used on clean, smooth, flat, non-porous, dry surfaces. Always try to make sure there is good suction before lifting. The suction cup dent p....
Check Stock

DMDMBSR Weed Puller Tool, Stand Up Weed Puller Long Handle Removable Steel Tube and Non-Slip 4 Claw Iron Head Design

  • Weed Puller Tool, Stand Up Weed Puller Long Handle Removable Steel Tube and Non-Slip 4 Claw Iron Head Design.
Check Stock

ROUTEKING 3164606 Cylinder Liner Press Installer Tool Heavy Duty Compatible with Cummins ISX X15

  • 【Fitment】Compatible with Cummins ISX X15 Liner Press. Alternative to part number 3164606..
  • 【Superior Material】Made of high quality solid steel with black anodizing, and application of precise mechanical design, sturdy and durable, impact-resistant, corrosion-resistant..
  • 【Function】This Cylinder Liner Press Installer Tool help to install antipolishing rings without damaging the liner and antipolising ring. Work easier to save your time and money!.
  • 【Easy to use】Install our 3164606 cylinder liner installation tool on the antipolishing ring and puller plate. Slowly screw it down and press the antipolishing ring into the counterbore of the liner..
  • 【Best service】ROUTEKING offer 100% new and high-quality product, fast delivery and best customer service to every customer. If you have any problems, please feel free to contact us..
Check Stock