Categories

Best Imperial Thread Insert Kit

SAE and Metric Bolt Gauges Check-a-Thread Nut Fastener Size Tool

  • ✿America SAE type measuring range: 4 - 84, Metric & America SAE Type & British Metric: 0.25 - 6.0mm, Imperial: 4G - 62G US: 8, 10, 11, 14, 19, 28.
  • ✿Made of stainless steel, the toothed edges are sharply defined and the numbers are stamped and easy to read, ensure the accuracy of measurement.
  • ✿Thread pitch gauge is used to check whether the dimensions of molds, machines and mechanical threads are correct. Center gauges are used for grinding and positioning threaded cutting tools on lathes.
  • ✿Including: 3 x Center Gauge + 1Pc America SAE Type Gauge + 1Pc Metric and Imperial Gauge.
  • ✿Use for check the thread size, can be used for measuring the metric, imperial and American SAE type screw thread.
Check Stock

Big-Sert 5382 3/8-24 Oversized Inch Thread Repair Kit

  • 3/8-16 Starter bolt thread repair kit cast iron blocks or aluminum blocks P/n 1535 TIME-SERT.
  • TIME-SERT P/n 1535 Kit includes all the tools and 4 special inserts with straight section for bolt alignment built into the insert..
  • The stripped Starter bolt thread depth of the hole should be 1.200" inches or 30mm Depth minimum..
  • Note: This kit can also repair a failed coil style insert. The failed hole should not be larger than the drill included in kit which is .484 inches..
Check Stock

TIME-SERT 3/8-16 Starter Bolt Thread Repair kit P/n 1535

  • 3/8-16 Starter bolt thread repair kit cast iron blocks or aluminum blocks P/n 1535 TIME-SERT.
  • TIME-SERT P/n 1535 Kit includes all the tools and 4 special inserts with straight section for bolt alignment built into the insert..
  • The stripped Starter bolt thread depth of the hole should be 1.200" inches or 30mm Depth minimum..
  • Note: This kit can also repair a failed coil style insert. The failed hole should not be larger than the drill included in kit which is .484 inches..
Check Stock

JoyTube 35 Pcs Thread Repair Kit, Stainless M6 x 1mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required..
  • 【Checking】Check that the thread and pitch of the tap and the bolt match..
  • 【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)..
  • 【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break..
  • 【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..
Check Stock

Desk Needle Threader Automatic Double Needle Hand Threader Hand Threader Green Double Hole Needle Threader Insertion Tool for Sewing Machine DIY Hand Made Works Threader

  • 【High Quality】100% brand new and high quality. This needle threader is made of plastic material, light weight and durable to use..
  • 【Double Hole Design】Double hole design helps thread the sewing machine needle more easily.With this needle threader kit, threading small eye....
  • 【Convenient】There is a tiny hole on the opposite end of the thread, it is for holding the sewing machine needle while you easily insert it into....
  • 【Easy to Operate】It is suitable for people who is in trouble of threading. If you are the type of person to take a sewing kit on holiday, this....
  • 【Easy Insert】There is a tiny hole on the opposite end of the thread, it is for holding the sewing machine needle while you easily insert it into....
Check Stock

PROXXON MICRO Mill MF 70, 37110

  • Includes the lathe, chuck key, five-piece carbide tipped cutter kit, internal chuck jaws and external chuck jaws, 11 feed rate gears and owners manual.
  • Drill, cut and turn metal, wood and plastic parts with precision..
  • Erie Tools variable speed 7 in. x 14 in. benchtop mini metal lathe creates precision parts..
  • Variable speed motor adjusts to 2500 RPM in either rotational direction allows left-handed threads..
  • Thread indicator helps users turn screw threads anywhere from 12 to 52 TPI. Metric or imperial..
Check Stock

XT AUTO 30pcs Stainless Steel M8 x 1.25mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 30pcs thread repair tool kit: The Kit Set not only includes the wire thread inserts, but the twist drill bits, wrench, thread taps, breaking pin tool which can solve your most repair needs..
  • High quality control: Made of precision high-speed steel for strength, wearproof and durability..
  • Easy to install: 1.Drilling - drill out the damaged threads using correctly sized drill bit provided 2.Tapping - Tap re-drilled hole using tap supplied (Cutting oil recommend) 3.Install the insert - place insert on installation tool and position the adjustable ring clockwise.4.Tang removal - remove the tang use the break tool..
  • Wide application: Great choice for restoring damaged threads in steel, iron, aluminum and anywhere which metal threads become stripped, crossed or damaged..
Check Stock

7/16-14 Oversized Big-SERT Kit cast Iron Big or Small Block Thread Repair p/n 5761E

  • This Thread Repair kit is Used to Repair or Replace Damaged or Stripped Internal Screw Threads.Suitable for engine repair and other automotive applications..
  • Sae: The kit Has Altogether 243 Pieces including insert installations, wire thread inserts, twist drill bits, thread taps, lug breaking tools ,thread gauge and adjustable tap wrench handle that allow you to have a smooth repairing experience.All Made According to Professional Standard..
  • All tools were packed in a convenient carrying case, easy and fast in collecting and placing the tools. Each accessory has its place, inserts will even be packaged in separate boxes..
  • Creates stronger internal thread in soft materials.Also come with detailed instructions..
  • Don't bother to spend a lot of money on a variety of models,all you need is our kit.Once for all..
Check Stock

Bonost 500Pcs Threaded Inserts Kit M2 M3 M4 M5 - Female Thread Heat Set Insert Brass Knurled Thread Insert Nuts for Plastic Injection Molding 3D Printing Metric

  • 【Designed for Injection Molding】: With deep & clear knurls, the threaded inserts will add enough strength to screw connections when inserted into plastic components. The softened plastic will flow into the knurl pattern and then harden to form a firm bond with the insert..
  • 【High-quality Material】: Made of premium brass material, our threaded insert for plastic has both aesthetics and high strength, which can be used for a long time. And the high thermal conductivity of brass thread inserts means faster heating and insertion into plastic parts..
  • 【How to Use】: Female thread knurled insert nuts are suitable for mounting into tapered holes by heating or for molding during injection molding. You can use a soldering iron to heat it up and then pressing it into the hole. It is easy to control and at a low cost..
  • 【Professional Insert Nuts Kit】: Various metric thread sizes available, including M2, M3, M4, and M5. Widely applied in laptop plastic housings, 3D printers, automotive, electrical injection molding, and more. And the every type of heat set inserts has an individual bag to prevent them from mixing in transit..
  • 【What You Get】: 500 pcs threaded inserts assortment kit, and customer friendly service. There are 15 different sizes to s....
Check Stock

2 Pack Thread Pitch Gauge, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth, Multi-Purpose Screw Pitch Cutting Gauge Caliper Gages Measuring Tool

  • ★【What You Get】: In this thread pitch gauge kit, it include 51Pcs America SAE type, 52pcs metric and Inch type, 3pcs metric & america SAE type & British Whitworth, they are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the thread pitch gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: 51pcs America SAE type measuring range is 4-84.
  • 58pcs Metric & America SAE Type & British Whitworth Metric is 0.25-6.0mm, Imperial is 4G-62G US: 8, 10, 11, 14, 19, 28..
  • ★【Easy to use】: Designed with a hole on each end, use screw for easy adjust and disassemble, from where you press the tooth gauge, you can easily rotate the thread blades, numbers are stamped clear for read..
  • ★【Wide Application】: They measure accurately and have almost no errors. Typically used to check the mold & machine & mechanical thread size determination is correct.
  • Accurately measures internal and external screw threads with thread blades of varied size.
  • Center Gauge use to grind and position thread cutting tool on a lathe..
Check Stock

E-Z LOK Threaded Insert for Hard Wood Assortment Kit Brass Thread Inserts 6-32 to 3/8-16

  • THREADED INSERTS FOR HARD WOOD – E-Z LOK Threaded Insert Assortment Kit for hard wood. Brass threaded inserts for putting strong, machine threads in wood..
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts in this thread repair kit provide superior holding power using a proprietary external “knife” thread to slice into the wood..
  • EASILY INSTALLS – The brass metal threaded inserts are easily installed with a screwdriver, bolt/jam nut, or optional drive tool..
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple..
  • KIT INCLUDES – 10 pieces each: 6-32 (0.375" long), 8-32 (0.375" long), 10-32 (0.500" long), 1/4-20 (0.500" long), 5/16-18 (0.625" long), 3/8-16 (0.625" long)..
Check Stock

ABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More

  • REPAIR DEEP-SEATED PLUGS: The ABN Spark Plug Thread Repair Rethreading Set, 14mm Metric – Rethreading Tool Kit is a comprehensive and time-saving kit that incorporates taper and lug taps together with integrated ream to allow you to fix a stripped spark plug threaded port and repair deep-seated plug configurations.
  • VARIOUS APPLICATIONS: High-speed steel (HSS) ST14x1.25 M14x1.25 (14mm thread size) suitable for damaged spark plug threads to clean and rethread spark plug ports with either a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
  • Stepped tap ensures correct alignment of cutter in existing spark plug hole.
  • Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
  • EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
  • Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
  • Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
  • EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch ....
Check Stock

52pcs Thread Pitch Gauge SAE Stainless Steel Screw Pitch Measuring Tool (Metric&British Whitworth(52pcs))

  • ✿Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • ✿Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • ✿Made of stainless steel, the toothed edges are sharply defined and the numbers are stamped and easy to read, ensure the accuracy of measurement.
  • ✿It is useful to check the tool angle when cutting threads on a metal lathe, check the angle on the thread cutting tool on the V-groove of the gauge.
  • ✿Use for check the thread size, can be used for measuring the metric and imperial screw thread.
Check Stock