Categories

Best Implant Analog Holder Driver Tool

Foifatt 313318001 String Trimmer Head Replacement for Homelite Ryobi RY15523A arborless Reel Easy Bump Trimmer Head Assembly P2009 RY15523AVNM

  • Drill/driver: compact design fits into small spaces, ideal for hard to reach areas Drill/driver: powerful motor with 15% better performance than a full-sized drill Drill/driver: LED light illuminates work surface for increased visibility.
  • Drill/driver: Magtray magnetic holder for convenient placement of screws and bits Impact driver: auto-load chuck for fast, easy 1-handed bit loading and ejecting.
  • Impact driver: tri-beam LED provides optimum illumination and eliminates shadows on work surface Impact driver: powerful motor provides enough torque for the most demanding applications.
  • JobPlus base with multi-tool head: compact tool head fits into tight spaces JobPlus base with multi-tool head: multiple position tool head adds handling versatility JobPlus base with multi-tool head: variable speed trigger allows precise speed adjustment.
  • JobPlus base with multi-tool head: compatible with RIDGID JobMax interchangeable tool head system Kit includes two 18-Volt ONE+ compact LITHIUM+ batteries which improves the performance of ONE+ tool up to 15% and features an on-board fuel gauge Dual chemistry charger: charges all Ryobi 18-Volt ONE+ batteries in as little as 30 minutes.
Check Stock

Ultrassist Dental Implant Model for Patient Education 4 Times Dental Implant Crown and Bridge Model for Presentation-Pink

  • Crowns are made of high-quality resin material. The implants and abutments are made of metal and not cheap plastic. High quality materials ensure that the display model is sturdy and durable..
  • Crowns, roots, implants and abutments can be separated, which makes it easier to demonstrate the tooth structure individually to patients. Magnets embedded in the crown and the top of the root ensure ease of detachment. The magnets also make the crown and the root attach firmly in place with virtually no risk of falling off..
  • The 4 times dental implant model comes with a separate bridge to better educate patients about implant and bridge restorative options. The 4X Model visually helps patients better understand dental restoration procedures..
  • The cross-section base of the gingival bone is convenient for doctors to show the tooth structure to the patient. It also shows the integral relationship between the implant and the root..
  • The dental implant model is an excellent tool to introduce and explain dental implant(s) to patients or students. The excellent visual explanation makes it easier for everyone to understand..
Check Stock

DEYUCHANG 1 Piece Dental Mixing Implant Cup Bowl Dental Tools Stainless Steel Bone Meal Cup Bone Meal Bowl Dental Implant Equipment

  • The tooth size of the implant hybrid cup is diameter: 31mm, depth: 12mm, height: 19mm.
  • Product material is German stainless steel.
  • Dental hybrid implant cup is a dental tool.
  • Stainless steel bone bowl can be sterilized by high temperature and high pressure at 138°C, safe and healthy, please rest assured to use.
  • If you have any questions about the dental hybrid implant cup, please feel free to contact us, we will reply to your email within 12 hours.
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Ridgid, Makita, Bosch, Ryobi, More (2 Pack, Premium)

  • Phillips, torx, square drive? Stop running around searching for the right bit. Keep them right on your impact driver or drill with five storage locations which you to keep your most used ¼" hex bits with you at all times. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Makita and some Ridgid drills and drivers. See pictures for specific fitments..
  • Mounts on either side of your tool and works with or without the belt clip. Many bit holders only mount on the right side of your tool so they get in the way when you are grabbing your driver and make bit changes harder if you are right handed. The Hardwerks bit holder works with or without Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Wondering where to put loose screws while you are working or how to carry that long drill bit? Stick your screws securely to the exposed magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Upgrade to the premium bit holder for the strongest neodymium magnet available so that even the heaviest bits won’t fall out when your driver is hanging upside down ....
Check Stock

Lzdrason Tape Measure Holder, Drill Holster, Drill Holder for Belt, Tactical Cordless Tool Belt Clip Holder, Holster with Belt Clip Hook, 1Pack

  • 【Protect Your Leather Tool Belt】: This tool holster is patent designed to free your hands. Lzdrason drill holster / tape measure holder is designed to mount to your tool belts with belt clip hook. It is a dream gift for your family, Poly Dirll holster is not only the holder for measuring tape and drills anymore..
  • 【Lighting Weight】: It is a small and lighting tools holster. Useful holster to hold measure tape, cordless drill, impact driver.It is a great holster to free your hands..
  • 【Quickly Hang up and Detached】: Special clip lock way, so this tool holster can be hang up to tool belt easily and removed from your working belt quickly..
  • 【Slim, Durable and Strong】: This tool holster is compatible with regular tool belts, can hold all measuring tape with Belt Clip. It is a slim, strong heavy duty holster that would prevent the wear and tear of your tool belt..
  • 【Ultralight and Indestructible】: It is a handmade tactical measuring tape holder, it is a great made Cordless Drill Holder with Stainless Clip reverted with heavy duty hardware. It is a lighting and Heavy Duty ....
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Makita, Ridgid, Bosch, Ryobi, More (2 Pack, Standard)

  • Don’t get stuck up a ladder without the bit you need! Five storage locations allow you to keep your most used ¼" hex bits on your drill or driver so you always have what you need when you need it. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Ridgid and Makita drills and drivers. See pictures for specific fitments..
  • Don’t let your bit holder get in your way or stop you from using your belt hook! The Hardwerks bit holder mounts on either the left or right side of your impact driver or drill. Bit holders that only mount on the right side of your tool get in the way when you are grabbing your driver and make bit changes harder. The Hardwerks bit holder works with Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Tired of dropping screws, holding them in your mouth or fishing for them in your pocket? Stick your screws securely to the magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Your bit holder won’t rotate, loosen or fall off! Hardwerks bit holder is screwed securely to your drill or driver. Bit holders attached with adhe....
Check Stock

SHARDEN Ratchet Screwdriver 13-in-1 Ratcheting Screwdriver Set Multi Screwdriver Tool All in One with Torx Security, Flat Head, Phillips, Hex, Square and 1/4 Nut Driver

  • ... screwdriver bits: T15/T20 Security Torx, 4mm/5mm/6mm Flathead, PH1/PH2/PH3 Philips, H4/H5 Hex, and SQ1/SQ2 Square. All the bits needed in one ratchet screwdriver set, reduce the number of tools you must carry.
  • 【Space Saver】Ratcheting screwdriver set stores 12 changeable tips in the handle with an integrated bit holder. It's convenient to screw off the end cap and switch the bits. The screw driver handle is 5.90" length, takes up very little space, fits into pocket, also suit for EDC, kitchen drawer, tool belt, tool box or backpack.
  • 【Humanized Design】Our screw driversets set has been professionally designed to maximize your repair capabilities. Cushion grip bi-material handle provides superb comfort, slip resistant and maximum torque. Magnetic bit holder ensures speedy and secure bit changes while the 1/4 bit holder applies to standard 1/4" bits.
  • 【Durability & Reliability】All bits are quality constructed with CRV Steel for longevity and durability. This screw driver set is covered by SHARDEN's lifetime warranty and 30 days money-back. If you have any issues, please don't hesitate to contact us, we will do our best to help every customer.
Check Stock

TEKTON 3-in-1 Stubby Phillips/Slotted Driver (#1 x 3/16 in, Black) | DMT13001

  • Includes 1-pc. Stubby Driver Handle with 1/4 Inch Nut Driver Bit Tube and 1-pc. Phillips/Slotted Bit, 1/4 Inch Shank: #1 x 3/16 in..
  • One compact and versatile tool gives you access to 2 screwdriver sizes and 1 nut driver size.
  • Chrome-plated steel tube serves as both a 1/4 inch nut driver and a screwdriver bit holder.
  • Extremely durable handle made of glass-reinforced nylon and molded in the USA.
  • Fluted sides provide a natural grip for your fingers.
Check Stock

Bosch GSR12V-300N 12V Max EC Brushless 3/8 In. Drill/Driver (Bare Tool)

  • Efficient drill/driver design provides Pro torque in a 3/8 in. Drill/driver At only 1. 6 lbs. (Tool only, not including battery).
  • Eco Brushless motor delivers 300 in. -Lbs. Of torque and a max speed of 1, 750 RPM for outstanding performance.
  • Compact housing features a head length of only 6. 0 in. And a weight of only 1. 6 lbs. (Tool only, not including battery).
  • Two-speed transmission provides a high-power setting at 0-460 RPM and a high-speed setting at 1, 750 RPM.
  • Precision 20+1 clutch settings allows for accurate torque settings for less fastener damage.
  • Included Components: (1) Gsr12V-300 12V Max Ec Brushless 3/8 In. Drill/Driver.
Check Stock

Removable Teaching Teeth Model Dental Implant Disease Adult Typodont Demonstration for Dental Teaching Study and Tooth Brushing Hygiene Education

  • Dental implant model is made specifically for dental schools programs to help students understand dental implants procedure, pathologies and techniques of repairing and implant training..
  • Demonstrative Implant Model & Fixed Prosthetic on Implant.
  • Explains the importance of Insertion of the Implant for Correct Prosthetic.
  • Reconstruction on Implant to avoid compromising of adjacent Teeth.
  • Excellent for Dental offices for patient's demonstrations.
Check Stock

Bosch PS22-02 12-volt Max Brushless Pocket Driver Kit with 2.0Ah Batteries, Charger and Case

  • POWER: Lightweight and compact at only 1.6 pounds, this tool features an EC brushless motor that provides 180 in.-lbs. of torque making it great for continuous overhead work..
  • LONGEVITY: The Bosch PS22-02 driver kit’s brushless motor and 2.0-Ah battery provides increased runtime for continuous work in high energy applications..
  • CONVENIENT: The tool’s 1/4-inch hex head allows for quick and easy bit changes and an interface for a belt clip or bit holder for portability and versatility..
  • PRECISION: The Bosch PS22-02 pocket driver has 20+1 clutchsettings and 2-speed gearbox offer precise torque adjustment for accurate and controlled screw driving..
  • DURABLE: The PS22-02 pocket driver kit is crafted with Bosch’s exclusive Durashield housing to take the toughest wear and tear.
Check Stock

Gudoread Pivoting Bit Tip Holder - Magnetic Screwdriver Bit Holder for Drill, Adjustable In 20 ° Rotation Mode (1, White)

  • ... organizer that allows you to organize ¼” drive hex bits easily and keeps your bits safe & secure, while letting you keep track of them without losing any – best screw bit storage!.
  • SMART ADVANCED DESIGN – With 69 holes for 1/4” drive hex bits, 3 specially designed holes hold 3/8” drive chucks and 18 clip holders for mid-size to long bits, this screwdriver bit holder gives easy access to your bits when needed. The hex bit holder’s push-button release makes removing any individual rail simple – organize like a boss with our hex bit drawer organizer!.
  • PREMIUM QUALITY – MADE IN USA from the highest grade materials, the hex bit holder is strong, impact resistant, durable, and long-lasting. The taper-lock bit holder gives your bits a secure hold and can be hung vertically or laid horizontally for best use – STATE-OF-THE-ART hex bit organizer!.
  • COMPACT BIT STORAGE UNIT – Giving you more storage in less space, the bit boss universal bit organizer helps keep your garage or workshop clutter-free and holds a wide variety of bits. The bits are organized in a unique manner allowing the screw bit holder to fit in your tool drawer – MUST HAVE tool accessories..
  • 100% SATISFACTION PROMISE – Our driver bit holder is designed to help customers kee....
Check Stock

TEKTON 3-in-1 Stubby Phillips/Slotted Driver (#2 x 1/4 in, Black) | DMT13002

  • Includes 1-pc. Stubby Driver Handle with 1/4 Inch Nut Driver Bit Tube and 1-pc. Phillips/Slotted Bit, 1/4 Inch Shank: #2 x 1/4 in..
  • One compact and versatile tool gives you access to 2 screwdriver sizes and 1 nut driver size.
  • Chrome-plated steel tube serves as both a 1/4 inch nut driver and a screwdriver bit holder.
  • Extremely durable handle made of glass-reinforced nylon and molded in the USA.
  • Fluted sides provide a natural grip for your fingers.
  • Bit tips are milled 21 mm down the shank, allowing for clearance into tight spaces.
  • A spring-loaded retaining ball holds the bit in the tube.
Check Stock