Categories

Best Implant Insertion Tool

vinmax Dental Teeth Model,Transparent Dental Implant Disease Teeth Model Dentist Standard Pathological Removable Tooth Teaching Tools for Student Pathological Teeth Model

  • ❤ Beautiful transparent models designed with removable teeth.
  • facile to take down and set up, allows full visibility to cavities, implants, and nerves. This is an ideal implant-model for easy demonstration to patients of dental surgical and non-surgical procedures..
  • ❤ Vinmax Dental implant model [Blue color] for dentists' teaching-demonstrations for patients or for college educational purposes..
  • ❤ Disply a variety of dental diseases,including:dental cries,shaped defects,fusion roots, periapical cysts,crown fracture, impacted teeth,retained deciduous teeth, etc..
  • ❤ This pathological teeth model is composed of maxillary teeth and mandibular teeth,it's transparent,easily to know of the type and structure of adult's teeth..
  • ❤ Explains the importance of Insertion of the Implant for Correct Prosthetic Reconstruction on Implant to avoid compromising of adjacent Teeth..
Check Stock

Augment Nutrition Dental Implant Support Supplement - Support Bone Formation & Osseointegration - All-Natural Formula with Vitamins & Micronutrients - Non-Synthetic & Non-GMO 90 Servings

  • ALL-NATURAL FORMULA: Augment Nutrition is formulated with all-natural and clinically researched ingredients to optimize bone formation and osseointegration after Tooth extraction, Implant insertion, Osseous surgery, and Bone augmentation. This Doctor Formulated product is all-natural, non-synthetic, and non-GMO!.
  • SUPPORT YOUR DENTAL SURGERY SUCCESS RATE: Augment Nutrition is a combination of essential vitamins (B, C, E, and D), calcium, and strong micronutrients that can get the job done safely and play a significant role in bone regeneration and osseointegration of dental implants. It may reduce the chances of dental implant failure even for smokers!.
  • PROMOTES DENTAL HEALTH NATURALLY: Our product offers a unique and modern nutritional approach to support dental implantation. It significantly accelerates the healing process naturally with underlying conditions such as Malnutrition, Diabetes mellitus, and Vitamin deficiency..
  • PRE & POST DENTAL IMPLANT SUPPORT: Augment Nutrition works on the first dose - start a week before surgery and continue 3 months post-operation. It helps heal faster, aids recovery time and reduces post-dental surgery pain. It’s recommended for those 18 and above who are undergoing dental surgery..
Check Stock

Ultrassist Dental Implant Model for Patient Education 4 Times Dental Implant Crown and Bridge Model for Presentation-Pink

  • Crowns are made of high-quality resin material. The implants and abutments are made of metal and not cheap plastic. High quality materials ensure that the display model is sturdy and durable..
  • Crowns, roots, implants and abutments can be separated, which makes it easier to demonstrate the tooth structure individually to patients. Magnets embedded in the crown and the top of the root ensure ease of detachment. The magnets also make the crown and the root attach firmly in place with virtually no risk of falling off..
  • The 4 times dental implant model comes with a separate bridge to better educate patients about implant and bridge restorative options. The 4X Model visually helps patients better understand dental restoration procedures..
  • The cross-section base of the gingival bone is convenient for doctors to show the tooth structure to the patient. It also shows the integral relationship between the implant and the root..
  • The dental implant model is an excellent tool to introduce and explain dental implant(s) to patients or students. The excellent visual explanation makes it easier for everyone to understand..
Check Stock

DEYUCHANG 1 Piece Dental Mixing Implant Cup Bowl Dental Tools Stainless Steel Bone Meal Cup Bone Meal Bowl Dental Implant Equipment

  • The tooth size of the implant hybrid cup is diameter: 31mm, depth: 12mm, height: 19mm.
  • Product material is German stainless steel.
  • Dental hybrid implant cup is a dental tool.
  • Stainless steel bone bowl can be sterilized by high temperature and high pressure at 138°C, safe and healthy, please rest assured to use.
  • If you have any questions about the dental hybrid implant cup, please feel free to contact us, we will reply to your email within 12 hours.
Check Stock

ZJKC Transparent Dental Implant Disease Teeth Model Dentist Standard Pathological Removable Tooth Teaching Tools

  • Dental implant model for dentists' teaching demonstrations for patients or for dental schools or colleges teachers teaching for students.
  • It helps people better understand the structure or function of teeth, helpful to explain the importance of insertion.
  • Designed with removable teeth, convenient to take down and set up, clearly show people the detailed structure of teeth.
  • Transparent upper and lower jaw model completely with natural size.
  • Suitable for: dentist, dental class and other dental learners.
Check Stock

NewkeepsR 2PCS-18G/16G Implant Grade Titanium Pin Insertion Taper for Threadless Labret Bar 1.0mm/1.2mm

  • Sold as 2 PCS: one taper is 18ga(1.0mm) thickness,another is 16ga(1.2mm),Length: 38mm (approx 1.5 inch). A thin pin at the end(no thread/no hole).Material: 6AL4VELI ASTM F-136 implant grade titanium ,Titanium has excellent biocompatibility and is half the weight of surgical steel..
  • Function:① Stretch hole for gauge modification purpose(from 20g to 18g/16g),Good piercing hole stretch/expander kit.Make your stretching journey safe and easily. ② Used for assisting in the placement of shaft/post. Put threadless piercing bar in the end of the pin, then push it though.Pin will come out of the hole and threadless piercing bar/post will be in. ③ Changing your nose piercing nostril stud much easier.Highly recommend to change threadless/press-fit into jewelry!.
  • Attention:① Our threadless insertion pin only fit our threadless piercing jewelry,others is unfit. ② Make sure to use some kind of vitamin e or mineral oil for lubricant while stretching. ③ If you had sensitive skin using this titanium insertion pin is very safe..
Check Stock

Jonard FT-6 Flaring and Insertion Tool, 4-1/4\ Length

  • The flaring end of the tool facilitates the expansion of the cable providing easier insertion of "F" connectors.
  • The insertion end makes "F" connector insertion fast and easy, even in cold weather.
  • This tool is recommended for use on polyethylene jacketed cables and plenum cables, and is especially helpful when using tri-shield and quad-shield cables.
Check Stock

2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)

  • 2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
  • Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
  • The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
  • Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
  • Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
  • Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
  • Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
  • It can help you drill easily and fast and save time and energy for you.
  • The combination of blue and black color makes the dr....
Check Stock

Jamghe 3D Printer Resin Dental Pro Model Resin Dental Prosthetic Model Resin for Crown and Bridge Model, Orthodontic Model, Implant Model etc. (Almond)

  • Ultra low shrinkage -- This is the lowest shrinkage resin among jamghe resins, ideal for restoration case, orthodontic case, implant case etc..
  • High precision -- High accurate and non deformation for days during the whole process, makes the jobs in accurate size..
  • Scratch Resistance -- Insure the accuracy of the insertion process between the die and model..
  • Fast Printing -- DLP 1-3s/ each layer, LCD mono 2-3s/each layer, LCD RGB 6-8s/each layer..
  • Widly compatible -- Suitable for DLP or LCD 405nm open system, no matter it is LCD 2k or 4k, RGB or monochrome screen..
Check Stock

Jamghe 3D Printer Resin Dental Pro Model Resin Dental Prosthetic Model Resin for Crown and Bridge Model Orthodontic Model Implant Model etc Skin

  • Ultra low shrinkage -- This is the lowest shrinkage resin among jamghe resins, ideal for restoration case, orthodontic case, implant case etc..
  • High precision -- High accurate and non deformation for days during the whole process, makes the jobs in accurate size..
  • Scratch Resistance -- Insure the accuracy of the insertion process between the die and model..
  • Fast Printing -- DLP 1-3s/ each layer, LCD mono 2-3s/each layer, LCD RGB 6-8s/each layer..
  • Widly compatible -- Suitable for DLP or LCD 405nm open system, no matter it is LCD 2k or 4k, RGB or monochrome screen..
Check Stock

Jamghe 3D Printer Resin Dental Pro Model Resin Dental Prosthetic Model Resin for Crown and Bridge Model Orthodontic Model Implant Model etc Yellow

  • Ultra low shrinkage -- This is the lowest shrinkage resin among jamghe resins, ideal for restoration case, orthodontic case, implant case etc..
  • High precision -- High accurate and non deformation for days during the whole process, makes the jobs in accurate size..
  • Scratch Resistance -- Insure the accuracy of the insertion process between the die and model..
  • Fast Printing -- DLP 1-3s/ each layer, LCD mono 2-3s/each layer, LCD RGB 6-8s/each layer..
  • Widly compatible -- Suitable for DLP or LCD 405nm open system, no matter it is LCD 2k or 4k, RGB or monochrome screen..
Check Stock

Connectors Pro Pc Accessories 2-Pack DB Pin Tool, D-Sub Insertion/Extraction Tool

  • Pin Insertion Tool On One End And The Extraction Tool On The Other.
  • This Pin Insertion And Extraction Tools Makes The Job Easier By Properly Setting Or Removing Typical Contact Pins From D-Sub Connectors.
Check Stock

Jonard Tools WK-7 IC Insertion Extraction 5 Piece Tool Kit

  • DIP IC INSTALLATION: This tool kit is designed to facilitate the installation and extraction of DIP IC and PLCC chips on circuit boards.
  • CMOS SAFE: All tools that engage conductive surfaces are CMOS safe and include grounding lugs where appropriate.
  • INCLUDES: EX-1 DIP IC Extractor (8-24 pins), EX-2 DIP IC Extractor (24-40 Pins), EX-5 PLCC Extractor, ESD Safe, MOS-1416 Insertion Tool (14-16 Pins), and MOS-2428 Insertion Tool (24-28 Pins).
Check Stock