Eagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gallon oil cans, We provide 6 threaded collar caps 3 Coarse Thread & 3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,4 Each set of products....
Check Stock

Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can....
Check Stock

Atima Generator Accessories – Extended Run Dual Fuel System Extender Kit for Honda Generator

  • [Function]: ATIMA Dual Fuel System Extender Kit can power two generators simultaneously. It is very easy & convenient to use. Just connect the pipes, combo kit gas cap tube and attach them to a Honda Generator or any other compatible generators. The generator then can intake the fuel from the external tank and it can extend the operation time..
  • [Composition]: This kit includes one long fuel pipe with automatic lock.
  • two short fuel pipes connected to the fuel tank cap and two fuel tank caps. The tight fitting of the fuel pipe prevents oil leakage..
  • [Advantage]:1: Run honda generator fuel extender System Each fuel pipe interface is a quick interface, so it is very convenient to connect .2: When using our products, the generator ,fuel tank and leather pipe are directly connected, not twisted, reducing the distortion of the leather tube and increasing the service life..
  • [Thread fit] :The fuel tank cap thread is tightly coupled with the generator thread, and the rubber gasket is squeezed with the generator port to form a seal to prevent air from entering..
  • [Tips]:The users should buy another tank with Thread outlet to connect this system , like attwood 8806LPG2S Epa Certified Portable Fuel Tank.The model number of the generator must match the model of the f....
Check Stock

Thomas & Friends: Start Your Engines!

  • 【Large Capacity】 Large capacity of 30 gallon oil transfer tank is easy to store, to transfer various kinds of oil..
  • 【Material】Made of high strength carbon steel, tank-type construction, powder coated finish, resist rust, ensures it's long-last serving life-span.
  • 【Multiple Functional Oil Storage Tank】Gas tank is ideal for storing oil for automobiles, gas powered lawn and garden tools, motorcycles/ATVs..
  • 【Convenient Handle and 10" Wheel 】It features a convenient handle and two 10" large wheel for easy moving and relocation..
  • 【Sturdy Frame and Anti-Static Ground Clamp】The painted steel gas caddy is sturdy and durable. It comes with an anti-static ground clamp to prevent the possible accidental static caused by friction during the discharging process..
Check Stock

Gas Can Spout Replacement ,Gas Can Nozzle,(2 Kit-White) with 4 Screw Collar Caps(2 Coarse Thread &2 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps,Thick Rubber pad,Spout Cover,Base Caps

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas con vent caps, (Gas Con Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Con....
Check Stock

Tank Of Gas And A Radio Song

  • Gas Scooter Fuel Tank Cap for 2 Stroke 43cc 47cc 49cc Engines mini bike gas tank 52cc CG430 520 Engine 43CC 40-5 brush cutter trimmer ground auger fuel tank cap.
Check Stock

30-Gallon Portable Oil Transfer Fluid Diesel Fuel Storage Tanks Gas Caddy Storage With Pump and Wheels For ATV Car Mowers Tractors Yellow

  • 【Large Capacity】 Large capacity of 30 gallon oil transfer tank is easy to store, to transfer various kinds of oil..
  • 【Material】Made of high strength carbon steel, tank-type construction, powder coated finish, resist rust, ensures it's long-last serving life-span.
  • 【Multiple Functional Oil Storage Tank】Gas tank is ideal for storing oil for automobiles, gas powered lawn and garden tools, motorcycles/ATVs..
  • 【Convenient Handle and 10" Wheel 】It features a convenient handle and two 10" large wheel for easy moving and relocation..
  • 【Sturdy Frame and Anti-Static Ground Clamp】The painted steel gas caddy is sturdy and durable. It comes with an anti-static ground clamp to prevent the possible accidental static caused by friction during the discharging process..
Check Stock

WTMORE Boat Fuel Tank 3 Gallon 12L, Marine Outboard Motor Fuel Tank w/Connector, Compatible with Kayaks, Small/Large Boats, Inflatables and Canoes- Red

  • Built to Last- This boat fuel tank is made of high density polyethylene, low permeability, anti-aging, impact resistance, won't rust, crack or chip, it can naturally rebound without permanent deformation after encountering an impact..
  • Fuel Up With Ease- Marine portable fuel tank 3 gallon (12 litre) includes 1 pcs fuel line and 1 pcs primer bulb, the fuel hose comes with snap-on connectors to allow quick attachment and removal of boat fuel tank and outboard engine, fuel up with ease. It's perfect for small to large boats, inflatables, canoes and even kayaks..
  • Scientific Design- I-shaped lifting handle design is more ergonomic. It's light weight compact, easy to carry, easy to stow, durable and strong. The outboard boat motor fuel tank cap has two function, Sealing and Venting. In addition there are separate air inlet and oil outlet, design for prevent oil from spilling..
  • With Filter- A filter is built into the air inlet of the portable marine fuel tank to ensure clean fuel. Marine outboard motor fuel tank features a fine mesh input spout so you can fill this portable marine fuel tank without worrying about gunk and grime getting in the gasoline..
  • With Fuel Gauge- Marine fuel tank provides a high contrast fuel gauge to accurately monitor the level of remai....
Check Stock

VP Racing Fuels Motorsport 5 Gallon Square Plastic Utility Jug Yellow & 14 Inch Hose

  • 【Large Capacity】 Large capacity of 30 gallon oil transfer tank is easy to store, to transfer various kinds of oil. Size-Pump Flow Volume: 25L / 80rmp. Hose Size: 8FT. Color: Yellow.
  • 【Material】Made of high strength carbon steel, tank-type construction, powder coated finish, resist rust, ensures it's long-last serving life-span.
  • 【Heavy Duty Fuel Caddy】The wheels are of pretty high quality, and they rolls good. SUNROAD 30 Gallon Fuel Caddy was drop-tested with a full load to ensure easy rolling mobility and long service life.
  • 【Multiple Functional Oil Storage Tank】Gas tank is ideal for storing oil for automobiles, gas powered lawn and garden tools, motorcycles/ATVs..
  • 【Convenient Handle and 10" Wheel 】It features a convenient handle and two 10" large wheel for easy moving and relocation..
  • 【2 Way Rotary Pump】 Easy to use reversible rotary pump fills and siphons by simply reversing the cranking action..
  • 【Sturdy Frame and Anti-Static Ground Clamp】The painted steel gas caddy is sturdy and durable. It comes with an anti-static ground clamp to prevent the possible accidental static caused by friction during the discharging process..
Check Stock

49CC 2-Stroke Engine Motor Kit, Mini Pull Start Engine for Pocket Bike Mini Dirt Bike Atv Or Scooter

  • Gas Scooter Fuel Tank Cap for 2 Stroke 43cc 47cc 49cc Engines mini bike gas tank 52cc CG430 520 Engine 43CC 40-5 brush cutter trimmer ground auger fuel tank cap.
Check Stock

KATUR Motorcycle Black Pop-up Fuel Gas Oil Tank Cap Vented Flush Mount Reservoir Gas Cap Vented Fuel Tank Screw Compatible with Harley Davidson 1982-2018

  • ★【Pop-up Fuel Gas Oil Tank Cap】 Pop-up Gas Cap for Harley. Made of High Quality CNC Billet Aluminum. Black Pop-up and Clockwise Tightening Design.Comes with Rings to Prevent the Oil Inside the Tank from Leaking..
  • ★【Excellent Design】Preserves the customized look of your motorcycle with a low profile design that is flush mount to the surface of the tank.
  • Gain a clean look with a sleek, uncluttered appearance..
  • ★【Fitment】Fit for 1982-2018 Harley Davidson all models with single screw in gas cap. Do not fit for 2008+ Harley Sportster models..
  • ★【Easy to Install】Simply push the center area down and rotate 90 degrees to show or hide the inner cap.Direct Replacement the existing cap. Please check for the height of gas hole to make sure there is enough space for installation..
  • ★【Buy with Confidence】We offer "TWO YEAR" warranty on item(s) that confirm to be manufacturer defect.We'll respond within 24 hours on weekdays..
Check Stock

BLACKHORSE-RACING Universal 800ml Car Radiator Coolant Overflow Oil Catch Tank Cooling Catch Bottle Overflow Reservoir Heatsinks Aluminum Billet Silver

  • ▶[Keep Engine Clean] Capture the oil and moisture in the helium and reduce the dirt and oil in the engine in the intake system. Keep the engine clean, increase horsepower and maintain engine life..
  • ▶[Prevent Oil Leakage] Tight sealing cover, full Tig welding, thread with O-ring gasket, maintain a good closed environment to prevent oil leakage..
  • ▶[6061 Aluminum Ingot] Made of high quality thick aluminum ingot, enhanced strength, anodized and polished, durable and long-lasting..
  • ▶[Removable Cap] The fuel tank cap can be opened when the oil in the tank is full. Waste oil and dirt in the barrel can be poured out and reused..
  • ▶[Quick Installation] Easy to install on the exhaust pipe of the original car, away from heat. Secure with a clip and try to keep the entire pipe in a vacuum..
Check Stock

Happybuy 10152 PSI Hydraulic Electric Pump 750W Single Acting 110V Solenoid Pedal 7L Hydraulic Power Pack Cylinder

  • Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min..
  • Large Capacity Tank: With a large fuel tank capacity, 7L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The hydraulic pump tank uses the 15th hydraulic oil. It has the advantages of compact size, lightweight, and simple structure..
  • Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this single acting electric oil pump by a lever which has a rubber cap in one end for a comfortable grasp and use. The high-pressure oil pipe is of high quality and durability. The oil pipe coupling is fitted with an M10 thread. Connector Type: 3/8" NPT ISO 14540 quick hydraulic coupler with dust cap..
  • Various Application: The pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending,....
Check Stock