Categories

Best Inch Drawer Pull Template

Ravinte Cabinet Door & Drawer Hardware Installation Template Kit Include Drill Bit  Mounting Template for Cabinet Knob, Cabinet Pulls

  • WORKS FOR DRAWER & DOOR: Knob and Pulls with 3" (76mm), 3-3/4" (96mm), 5-" (128mm) hole center..
  • Kit Includes: (1) Door Drilling Template, (1)Drawer Drilling Template, (1) 3/16'' Drill Bit.
  • EASY: Template allows for easy installation of pulls.
  • Designed for use with any knob and for common pull sizes.
  • CLEAR: Clear Platic can see through the template.
Check Stock

Emmet's Hedgehog / Lacey's Jig / Handley's Tweed

  • KITS INCLUDES: - (1) Knob Drilling Template - (1) Pull Drilling Template - (1) 3/16" Drill bit..
  • WIDELY COMPATIBLE: Aligns from 2-1/2"(64mm), 3"(76mm), 3-1/2"(90mm), 3-3/4"(96mm), 4"(102mm), 4-1/2"(115mm), 5"(128mm) and 6-1/4"(160mm) handles. The scope of application is wider than the products on the market, which can meet your different needs..
  • HIGHT- QUALITY-MATERIALS: We increased the thickness of this pull drill mounting template to prevent bending. It can be used again and again..
  • EASY TO OPERATE: Simple step by step drilling measurement template instructions included, the transparent body of our drilling demplate makes it easy to measure mark the center of your drawer front and to see that mark with the template in place..
  • PERFECT SERVICE: We will patiently answer you if you have any questions.If you are not satisfied with our item, please contact us and we will give you refund or replacement.Choose now, buy now, No risk for you!.
Check Stock

Goldenwarm Cabinet Handle Template Drill Mounting Template (1 Pack) - HDTM160 Template Guide for Cabinet Knobs, Drawer Pulls,Cabinet Hardware

  • KITS INCLUDES: – (1) Knob Drilling Template – (1) Pull Drilling Template – (1) 3/16″ Drill bit..
  • WIDELY COMPATIBLE: Aligns from 2-1/2″(64mm), 3″(76mm), 3-1/2″(90mm), 3-3/4″(96mm), 4″(102mm), 4-1/2″(115mm), 5″(128mm) and 6-1/4″(160mm) handles. The scope of application is wider than the products on the market, which can meet your different needs..
  • HIGHT- QUALITY-MATERIALS: We increased the thickness of this pull drill mounting template to prevent bending. It can be used again and again..
  • EASY TO OPERATE: Simple step by step drilling measurement template instructions included, the transparent body of our drilling demplate makes it easy to measure mark the center of your drawer front and to see that mark with the template in place..
  • PERFECT SERVICE: We will patiently answer you if you have any questions.If you are not satisfied with our item, please contact us and we will give you refund or replacement.Choose now, buy now, No risk for you!.
Check Stock

Homdiy Cabinet Handle Template Drill Mounting Template (1 Pack) - Hardware Installation Template Guide for Cabinet Knobs, Drawer Pulls,Cabinet Hardware

  • KITS INCLUDES: – (1) Knob Drilling Template – (1) Pull Drilling Template – (1) 3/16″ Drill bit..
  • WIDELY COMPATIBLE: Aligns from 2-1/2″(64mm), 3″(76mm), 3-1/2″(90mm), 3-3/4″(96mm), 4″(102mm), 4-1/2″(115mm), 5″(128mm) and 6-1/4″(160mm) handles. The scope of application is wider than the products on the market, which can meet your different needs..
  • HIGHT- QUALITY-MATERIALS: We increased the thickness of this pull drill mounting template to prevent bending. It can be used again and again..
  • EASY TO OPERATE: Simple step by step drilling measurement template instructions included, the transparent body of our drilling demplate makes it easy to measure mark the center of your drawer front and to see that mark with the template in place..
  • PERFECT SERVICE: We will patiently answer you if you have any questions.If you are not satisfied with our item, please contact us and we will give you refund or replacement.Choose now, buy now, No risk for you!.
Check Stock

Rok Hardware Knob Handle Pull Drill Mounting Template for Cabinet Doors and Drawers

  • FUNCTION: Aligns 3″ (76mm), 3-3/4″ (96mm), and 5-1/32″ (128mm) handles. Used for drilling holes with precision toward accurate placement, making installation easy..
  • MUST HAVE: This Cabinet Door & Drawer Drilling Template will allow you to install your pulls and knobs flawlessly..
  • EASY TO USE: Simple step-by-step drilling measurement template instructions included. Boasts a precision design for easy drilling with the 3/16″ drill bit for the right hole size..
  • ADVANTAGES: This kit is the perfect tool to ease all types of projects with accuracy. It is easy to carry and lightweight..
  • KIT INCLUDES: (1) Knob Drilling Template | (1) Pull Drilling Template | (1) 3/16″ Drill bit.
Check Stock

TP-1934 - Cabinet Hardware Jig with Case - Accurate Drawer Knob Pull Drilling - Drill Template for Professional Hardware Mount Installation - Adjustable Door Tool - Made in USA - True Position Tools

  • QUICKLY INSTALL KITCHEN HARDWARE LIKE A PRO with the True Position Tools TP-1934 cabinet handle template tool, which is specifically designed to make hole alignment and handle installation a breeze! MADE IN USA.
  • EASY TO ALIGN EVEN IF YOU HAVE ZERO EXPERIENCE! No need to call costly professionals anymore. Use our adjustable, simple and highly-accurate cabinet knob template tool to install hardware 10x faster and more accurately..
  • NO MORE RUINED CABINET DOORS OR DRAWERS! Use our accurate hardware installation jig to drill holes and install cabinet or drawer pulls and handles with zero effort. Just set the hardware spacing, adjust the desired location, tighten and drill! Save time and money and get the job done right!.
  • NO CLAMP NEEDED. REVERSIBLE FOR SPEEDY INSTALLATION! Our precision cabinet hardware jig is designed for use without clamps and is reversible for quick drilling, simply flip the jig over for repeated settings on opposite doors. Marking holes is a thing of the past with our robust drill through design..
  • PERFECT FOR ALL PROFESSIONAL CABINET MAKERS & DIYERS! Our drawer pull template features replaceable 5mm case hardened steel bushings that make it ideal for heavy duty professional use. Lifetime bushing warranty, free replacement..
Check Stock

CabinetRTA Soft-Close DIY Slide Out Cabinet Shelf Pull-Out Wood Drawer Storage (W)33 x (D)21

  • The minimum cabinet opening width should be 33 inch, and the interior depth of cabinet should be 21.25 inch - 23 inch (Includes an adjustable bracket to drill on the cabinet). This Soft-Close Pullout Drawer Box actual width is 32 inch. The total width of drawer sliders (both sides) is 1 inch.
  • Not Assembled: Shipped "UNASSEMBLED" but should be very easy to assemble and take just a few minutes. No nail and glue needed. Each order is One Single set. This Soft-Close Pull Out Drawer is good for pantry, vanities, under sink (kitchen or bathroom) (see video).
  • Natural Wood Finished: This Soft-Close Pull Out Drawer Organizer is dovetail joint drawer box. No paint or stain is applied.
  • This Soft-Close Pull Out Drawer includes 5/8" thick solid wood, and one thick plywood bottom.
  • 45mm Slider: Rated to hold up to 100 lb. This Roll Out Drawer for Cabinet Includes two 20-inch soft-close full extension drawer slides (Side-mounted). Assembly Instruction Updated (Feb.2021).
Check Stock

CabinetRTA Soft-Close DIY Slide Out Cabinet Shelf Pull-Out Wood Drawer Storage (W)27 x (D)21

  • The minimum cabinet opening width should be 27 inch, and the interior depth of cabinet should be 21.25 inch - 23 inch (Includes an adjustable bracket to drill on the cabinet). This Soft-Close Pullout Drawer Box actual width is 26 inch. The total width of drawer sliders (both sides) is 1 inch.
  • Not Assembled: Shipped "UNASSEMBLED" but should be very easy to assemble and take just a few minutes. No nail and glue needed. Each order is One Single set. This Soft-Close Pull Out Drawer is good for pantry, vanities, under sink (kitchen or bathroom) (see video).
  • Natural Wood Finished: This Soft-Close Pull Out Drawer Organizer is dovetail joint drawer box. No paint or stain is applied.
  • This Soft-Close Pull Out Drawer includes 5/8" thick solid wood, and one thick plywood bottom.
  • 45mm Slider: Rated to hold up to 100 lb. This Roll Out Drawer for Cabinet Includes two 20-inch soft-close full extension drawer slides (Side-mounted). Assembly Instruction Updated (Feb.2021).
Check Stock

Woodstock D2796 12-Inch Dovetail Jig with Aluminum Template

  • Router requires a 7/16-Inch Guide Bushing and 1/2-Inch 14-Degree Dovetail Router Bit with 1/2-Inch shank (sold seperately).
  • Simple to set up, this sturdy, well-made jig makes 1/2-Inch half-blind dovetail joints, the hallmark of quality drawer construction.
Check Stock

Cabinet Hardware Jig All Metal with Φ5mm & Φ4.2mm Drilling Hole Aluminum Alloy Cabinet Hole Drilling Template for Knob/Handle/Pull Extra 2 Drill Bits & 1 Set of Fittings Inch & Metric 2 Scale

  • [ALL METAL CABINET HARDWARE TEMPLATE]10-inch(H) * 16-inch(W), the level bar is made of hardened stainless steel. The vertical bar & other parts are....
  • [MULTI-PURPOSE HARDWARE INSTALLING TEMPLATE]Our aluminum cabinet hardware jig is designed for precisely mounting of pull/knobs/handles at even height....
  • [ACCURATE & FRIENDLY TO DIYER]Easy to assemble, to find right spots for knob/handle/pull accurately & high efficiently. 2 Metal rulers can be....
  • [PORTABLE & GREAT LONGEVITY]A must-have cabinet installation tool for professional use. This punch locator drill guide is including enough fittings....
  • [PACKAGE DETAIL]1 Cabinet hardware template+ 2 drill bits( 5mm&4mm)+1 extra set of fittings(10 small pieces) to extend service life+1 instruction+1....
Check Stock

20'' Width Drawer Organizer Roll Wood Tray Kitchen OrganizerDrawer Box, Cabinet Slide Out Shelve Pull-Out Shelf, W/ Wood Spacer Pantry Organization Storage (Fits RTA Face Frame Cabinet B24, Pantry 24)

  • Checking Interior Dimension:---To properly install, the minimum cabinet opening width should be 21 inch, and minimum interior depth of cabinet should be at least 21.25 inch. This Pullout Drawer Box Actual Width is 20 inch. Drawer slider width total are 1 inch. Fit Ready to Assemble face Frame Cabinet B24. each order is One Single set..
  • Need Assemble: ---Shipped "NOT ASSEMBLED" But is very easy, DIY assemble Drawer box just need 3-5 minutes. No Nail and Glue Necessary. Each order is One Single set. This Cabinet Pull Out Tary is Good for Pantery, Vanties, Under sink..
  • Natural Wood Finished:---The Kitchen Drawer Organizer Is Dovetail Joint Drawer Box, Each order is One Single set..
  • Solid Wood:---This Pull Out Drawer Has 5/8" Thick Solid Wood, and Super Strong 1/4" Thick Plywood Bottom..
  • 35mm Slider:----This Roll Out Drawer for Cabinet Include 20 Inch Full Extension Drawer Slides ( Side-mounted).
Check Stock

HERMIT TOOLS 12“*10\ Inches Pack of 2 Circle/Grommet Templates | Decorative Templates for Woodworking (Circle+Grommet(12\×10\ Inches))

  • This Template set combines the most common grommet sizes into two templates,Help you clean out template drawer and free up valuable space..
  • Large size, 12*10 inches of each template..
  • Each size is clearly labeled for quick identification. Transparent acrylic with fine cross-hairs on each hole makes it easy to align the template with your pencil marks..
  • Use with the 5/8" Short-Shank Guide Bushing, which is specially designed for 1/4" template stock..
Check Stock

HODRME Cabinet Drawer Drilling Template Jig-Door Handles and Knobs Hardware Punch Locator for Easy Installation-Professional Measuring Woodworking Tool (ABS+Stainless Steel)

  • EASY TO USE: Set the hardware spacing, adjust the desired location, tighten and drill. That’s all. We also offer Instruction Manual. Save time and get the job well done. Besides, our precision cabinet hardware jig can be split into small parts, convenient to carry..
  • HANDLE AND KNOB DRILLING GUIDE TOOL: Making hole alignment is such an easy thing with this drill template tool. You can finish cabinet handles and knobs installation in minutes..
  • PROFESSIONAL MEASURING WOODWORKING JIG: Use our adjustable, simple and accurate punch locator to install drawer pull faster and better. And all the job can be done by yourself even without any experience..
  • WIDE RANGE OF USE: Quick, easy adjustments, a multiple purpose template for all kinds pulls/knobs/handles installation on drawers, doors and cabinet..
  • WARRANTY: Put your worries aside! If you don’t like our hardware installation drill jig for any reason, you can replace it or get refund..
Check Stock