Categories

Best Inch Drill Chuck Adapter

8 Inches Ice Fishing Auger with Extension - Ice Auger Drill Suitable for Gas Powered Earth Auger and Power Drill with Safety Disk, Replaceable Auger Blade

  • 【Ice Auger Adapter and Extension】Hex head shaft Ice Auger Adapter fit in 1/2 inch drill chuck for Power Drill and adjustable in three different heights, about 14 inches in length. 0.79 inch inner Round Shaft black extension fit to Gas Powered Earth Auger , 12.6 inches in length. The Extension and adapter convert most hand ice augers to automatic mode, saving your fishing time..
  • 【High-Performance Drilling】8'' auger diameter, about 20'' drilling depth(without Extension length ), weight 5.4 lbs. Quietly, lite weight and easy to use. Comes with spare blades, Dual flat steel blades offer smooth cutting and breakthrough. Drills fast and with the center point it can overlap holes and helps keep the bit stable when starting..
  • 【High Quality】The Ice Auger, Auger extension and Ice fishing Auger Drill Adapter were all forged from heavy duty, welded steel and finished with a powder coat for Long-lasting use without rusting or damaging..
  • 【Safety Topper and Carry Bag】The safety topper is really a must to prevent the auger from going through the ice if it falls out of your drill chuck. Saved your auger from disappearing dow....
Check Stock

HNBun 1/32

  • HIGH QUALITY: Mt2 taper drill chuck made of durable high speed steel, corrosion and rust resistance.
  • drill press chuck compatible with impact drill and different power tool electric drill.
  • DIMENSION: Capacity 1/32" - 5/8", Mt2 Drill Chuck Overall Length: 93mm (3.7). Accuracy: 0.005", Chuck Mount : JT33.
  • PROFESSIONAL TOOL: High quality triple grip drill chuck accepts accessories with 1-16mm shanks, securely holds a wide range of twist drill bits, step drill bits, paddle bits.
  • MULTIFUNCTION: Drill chuck adapter suitable for centering, drilling, tapping, reaming operation. For portable, bench or floor type drill press.
  • WARM TIP: The mt2 drill chuck can NOT be used counterclockwise.
Check Stock

Garden Auger Drill Adapter, SDS Plus to 1/2-Inch(M13 x 15mm) Thread Keyless Drill Chuck Adapter Round Shank for Impact Driver,Drive Hammer Drill

  • Compatibility: Fit 10mm dia round shank to 1/2" thread adapter for drill chuck..
  • Material: Garden Auger Power Drill Adapter is made of durable steel with 4 flats on the 0.36 inch shank to match up with the chuck teeth on your hammer drill..
  • Note: If the adapter need to work with a thread locker when there for a reverse motion, you can always use a thread locker on the screw holding the two pieces together to resolve this problem..
  • Size: Overall Length: 4.1 inches, Body Diameter: 0.77 inch..
  • Application: Adaptor connects drill to Earth Augers..
Check Stock

NEIKO 30275A Impact Wrench Adapter | 1/2 Drive Female to 1/4 Hex Converter | Quick Release | Quick Change Chuck | Square to Hex Bit Adapter| Impact Rated Cr-Mo Steel for Ratchet Wrenches Drivers

  • CONVERSION: Each hex to square to hex adapter /converter has duo ends. Female 1/2 inch adapter on one end and a 1/4 inch female hex-adapter on other....
  • PREMIUM QUALITY: Each impact to hex chuck adapter is made with a heavy-duty chrome molybdenum steel construction for durability and allows for the....
  • MULTI-FUNCTIONING: This impact chuck adapter converts any air or power impact wrench into a drill or ratcheting wrench into a driver or impact....
  • QUICK-CHANGE: The 1/2” drive quick-release mechanism in the chuck allows for easy, one-handed swapping between impact driver bits while working.....
  • 1/4” FIT: This impact hex adapter securely holds any standard screwdriver bits in a 1/4" hex-shank bit (including insert drill bits) to eliminate....
Check Stock

VISLONE 0.8-10mm Right Angle Bend Extension 90 Degree Professional Cordless Drill Attachment Adapter

  • 【Strong Material】This chuck drill adapter is made of ABS + Aluminum + Steel, tough and durable, lightweight and easy to carry..
  • 【Powerful Function】The drill chuck of the tool adopts standard 0.8mm-10mm drill bit. 1500RPM and 25N·m torque - This right angle adapter drill can withstand a maximum torque of 25N·m and a maximum speed of 1500 rpm..
  • 【Easy to Use】 This angle head screwdriver bit is easy to install and use, the screwdriver handle is very stable..
  • 【Extension Chuck】90° extension right angle chuck, it can work in hard to reach places, it is a practical accessory..
  • 【Universal Application】The 8mm hex shank of the elbow drill chuck is suitable for most standard drills: hand drills, electric drills, polishing equipment, etc..
Check Stock

CS Unitec | Heavy Duty 1/2' Drill Chuck w/Weldon Shank Adapter | Mag Drill Adapter Accessory

  • MAG DRILL CHUCK ADAPTER: 3/4" Weldon shank (Industry Standard) to 1/2" Jacobs style adapter.
  • ADJUSTABLE: Jacobs drill press chuck converter can be adjusted for use with up to 1/2" dia. twist drill bits.
  • VERSATILE: For use with magnetic drills and drill presses with 3/4" weldon / 2 Flat tool holder. Also for use on variable speed and reversible drills.
  • HEAVY DUTY: THE IBC 17 weldon chuck accessory is high quality, made In Germany and built to handle the most demanding drilling applications..
  • Includes: (1) 3/4" Weldon Arbor (1) 1/2" drill Jacobs tool holder (1) Chuck key.
Check Stock

RHKING Two Stage Auger Adapter Precision Durable Alloy Steel for use with Auger Drill

  • ✅ APPLICATION:The adapter allows you to use your Power drill with Auger Drill. Suitable the 3/4 inch internal diameter of the auger shaft and 7/8inch internal diameter of the auger shaft..
  • ✅ MANUFACTURE:Auger adapter are made of alloy steel with high strength, Quenching treatment, being hard chrome plated and good wearing resistance. good impact resistance and good deformation resistance..
  • ✅ SIZE:Auger adapter Overall Length: 5inch,Body Diameter: 0.71inch and 0.86inch.Bolt hole is 0.25inch hole and 0.31 inch hole. Fits drill chucks 1/2 inch and larger..
  • ✅ EASY TO USE:Three flat milled sides to fit in 1/2 inch drill chuck,flat surfaces large enough，Longer shank for the Power drill to clamp securely without slipping..
  • ✅ DIY DESIGN:If you use it for an ice auger, you can DIY make a Auger Stop plate, install it on the step of the adapter, and clamp it with the inner hole internal diameter 5/8 Shaft Collar, so as to prevent the auger from falling into the water..
Check Stock

SEDY 9-Pieces Impact Socket Adapter Set & Magnetic Bit Holder, 1/4\ Hex Shank with 1/4\

  • Each adapter made of heat-treated hardened chrome Vanadium(CR-V) steel, good abrasion resistance and high hardness, without breaking or rusting, deliver on long-lasting strength and durability. Includes a 60mm long bit extension bar with magnetized ends to securely hold 1/4-inch bits..
  • Spring loaded ball bearing on head, designed to fit securely while providing versatility and convenience no matter which tool you use. Compatible with common to heavy duty power tools, drivers, hand wrench, and screwdriver handle tools for flexible uses..
  • ▲4-Pieces 1/4" adapter: 25mm length, 30mm length, 50mm length, 65mm length --- can be converted to 6.35mm square head.
  • ▲2-Pieces 3/8" adapter: 50mm length, 65mm length --- can be converted to 9.53mm square head.
  • ▲2-Pieces 1/2" adapter: 50mm length, 73mm length --- can be converted to 12.7mm square head.
  • ▲1-Pieces 2.5 Inch magnetic bit extension piece with a 1/4-inch bit end..
  • All socket-drive adapter are 1/4” hex shank, hex adapter for square drive, the 1/4" hex shank air impact driver sockets fit all quick change chucks as well as standard drill chucks, fast connect, work on quick change drill chuck, standard drill chuck, handheld screwdriver, electric screwdriver, change your hand socket set into a driver soc....
Check Stock

LaBear Drill Chuck Keyless Mini 3-Jaw Adapter with Quick-change 1/4\ Hex Shank to Hold 1.5-6mm Alloy Black Drill Bits Milling Cutters

  • 【Chuck Adapter】Turns any ¼” cordless power screwdriver into a drill or grinder to quickly switch tasks and keep the job moving.
  • 【Specifications】- 1/4 inch ( 6.35 mm ) Hex shank, 3-Jaw Drill Chuck Adapter.
  • 【How to Use】- Keyless chuck converter easy ON and OFF for driving to drilling in seconds..
Check Stock

Hymnorq 1/2-20UNF Keyless Drill Chuck 2-13mm Clamping Range with SDS-plus Shank, 1/2 Socket Square Converter and 1/4 Inch Hex Shank, Fit Impact Hammer, Electric Wrench and Air Screwdriver

  • 3-JAW CHUCK - Drill Chuck with universal keyed 3-jaw design can firmly hold a variaty of bit shanks ranging from 2mm to 13mm.
  • 3 ADAPTERS - The 3 different types of adapter can easily convert your tool to a drill, suitable for multiple connecting needs.
  • The 1/4" hex adapter is for screwdriver, the 1/2" square socket adapter for impact wrench and the SDS-plus adapter for hammer drill / rotary hammer..
  • CONVINIENCE - Compared with keyed chucks, the keyless chucks can hold bits without additional tool, advoiding the inconvinience of keeping and finding a small chuck key.
  • DURABILITY - The chuck is high-precision threaded and tapered tightly with hard rust-resistant pp plastic body. The jaws, spings are made of premium steel alloy. All the extensions are applied with rust-proof finishing for extended service life..
  • WIDE COMPATIBILITY - This drill chuck adapter tool kit is suitable for gyro-screwdriver, wireless screwdriver, impact screwdriver, impact wrench, hammer drill and some angular polishing machines of most brands on the market like Dewalt, Bosch, Dremel, Kobalt, Milwauke....
Check Stock

Renekton 3/8” Drill Chuck with 1/4” Quick Change Hex Drive, Convert Impact Driver Hammer and Wrench to Drill

  • DURABILITY: The chuck is high precision threaded and tapered tightly with rust-resistant Cr-coated body and sleeve electrophoretic enameling coating. All the extensions are applied with rust-proof finishing for extended service life..
  • HIGHLY COMPATIBLE: Classic keyed 3-jaw design securely holds a wide range of twist drills and step drill bits with 1/16” to 3/8” shank..
  • UNIVERSAL SHANK: Drill chuck with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function..
  • MULTI PURPOSE: With included 1/2” Drive by 1/4” Hex adapter, can easily transform power impact wrench to a drill, with best performance under rotation speed between 500rpm ~ 3500rpm..
  • INCLUDES: This complete power tool conversion kit includes keyed 3/8” drill chuck, a chuck key and a 1/2” Dr. x 1/4” Hex adaptor..
Check Stock

Balande 1.5-13mm Capacity Drill Chuck, 1/2”-20UNF Mount Impact Driver Bits Chuck with 3/8\SDS-Plus Shank 1/4\ Hex Shank 1/2” Socket Square Female Adapter (SDJT 1.5-13MM 1 Packing)

  • 1.Mount: 1/2”-20UNF, Capacity range:1.5-13mm, use on impact drills and electric power driver.
  • 2.Come with 3/8"SDS-Plus Shank 1/4" Hex Shank 1/2” Socket Square Female Adapter.
  • 3.professional kit drill chuck securely holds a wide range of twist drill bits, step drill bits, paddle bits and larger circular saw.The included three kinds of drill chuck extension make the converter quick connect to different driver tools.
  • 4.Useful combination with our chuck adapter and 4 tools, you can get an useful combination and help you lock your accessory more stable, so save your time and energy to pick tools or complicated work procedure Please Note: The chuck can NOT be used counterclockwise!!.
  • 5.Our drill chuck adapter tool suitable for gyro-screwdriver, wireless screwdriver, impact screwdriver, impact wrench and some angular polishing machines.
Check Stock

Auger Power Drill Adapter, 4.1Inch Length Thread Keyless Drill Chuck Adapter Round Shank for Impact Driver (Type A)

  • ★Good Design: It with 2 flats on the 0.31 inch shank to match up with the chuck teeth on your cordless drill..
  • ★Compatibility: Fit 10mm dia round shank to 1/2" thread adapter for drill chuck..
  • ★Size Overall Length: 4.1 inches, Body Diameter: 0.77 inch..
  • ★Premium Material: The is made of durable steel, it provides a longer life, sturdy and durable..
  • ★Application: The adaptor connects drill to Earth Augers..
Check Stock