Categories

Best Inch Dust Collection System

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
Check Stock

DCT 4in Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
  • Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
Check Stock

DCT Dust Collector Accessories Kit – 1.25in x 10ft Vacuum Hose, Dust Collection Fittings, and Vacuum Reducer

  • ENHANCE DUST COLLECTOR EFFICIENCY: Create a vacuum system with the DCT | Woodworking Dust Collection 1.25” x 10’ Dust Hose with Fittings & Reducers and use to collect shavings and dust from your woodworking power tools.
  • Use as the last stage from your dust collector to your tool with 2.5-inch (6.4cm) ports with 1.5-inch (3.8cm) accessories.
  • Shopvac hose pairs with dust extractors and dust collection systems (not included) to prevent dust buildup.
  • PERFECT SIZE: 1.25-inch (3.2cm) outside diameter (OD) and 1-inch (2.5cm) inside diameter (ID) with a 1.2-inch (3cm) OD and 1-inch (2.5cm) ID small end fitting, 1.75-inch (4.4cm) OD and 1.5-inch (3.8cm) ID large end fitting, and 2.5” x 1.5” inch (6.4cm x 3.8cm) reducers to fit your attachments (measure application to ensure fitment).
  • 10-foot (3m) long vacuum hose for ample room to reach your equipment.
  • Small diameter for flexibility and maneuverability.
  • LET THE MAGIC HAPPEN: Included fittings screw into each end of the shop vacuum hose and fit snugly with the fittings on your existing power tools.
  • The small end of the dust collection pipe is ideal for connecting a random orbital sander, palm sander, biscuit joiner, or any other power tool with small dust collect....
Check Stock

WEN 6362 10-Amp Variable Speed Handheld Drywall Sander with Sandpaper, Dust Hose and Collection Bag

  • Reversible auxiliary handle perfect for both left-handed and right-handed users.
  • Variable speed 10-amp motor operates anywhere from 1500 to 2300 RPM.
  • 8.5-inch hook-and-loop base pad makes changing sandpaper easier than ever.
  • Internal dust removal system combined with the 7.5-foot dust hose minimize clean-up.
  • Includes a dust collection bag, two dust hose adapters (fits 1-7/8-inch, 1-1/2-inch, and 2-1/4-inch dust collection hoses), a shoulder strap, and 8 pieces of sandpaper.
Check Stock

Grizzly Industrial G0697X - 12\ 7-1/2 HP 3-Phase Extreme Series® Table Saw

  • 36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection..
  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0.010” maximum gap..
  • DUST COLLECTION: 99% dust collection is delivered above the table with the available dust collection blade guard (Model # TSG-DC, sold separately), and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
Check Stock

SawStop 10-Inch Professional Cabinet Saw 3-HP 52-Inch Professional TGlide Fence System PCS31230-TGP252

  • 52-INCH T-GLIDE FENCE ASSEMBLY: The 52-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection..
  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0. 010” maximum gap..
  • DUST COLLECTION: 99% dust collection is delivered above the table with the included dust collection blade guard, and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
Check Stock

Dust Collection Blade Guard

  • Independent lateral slides minimize blade exposure.
  • Low profile to allow for cuts as narrow as 3/4 of an inch.
  • Attaches directly to customer’s dust collection system.
  • Compatible with SawStop Overarm Dust Collection.
Check Stock

VEVOR 2 HP Dust Collector, Portable Cyclone Dust Collector, 1,500 CFM Woodworking Dust Collector with 13.2-Gallon Collection Drum and Mobile Base, 220V Dust Collection System 3-Micron Canister Kit

  • ...9.8 Amp low noise motor creates a powerful 1059 CFM airflow to exhaust dust and purify the air. Sound Rating: 73 dB. After using, a clean work environment will come back again..
  • Advanced Separation Technology: The cyclone system of this woodworking dust collector allows larger wood chips to fall and be caught in the collection drum, while finer wood particles are circulated into the filter. This achieves a better purification effect..
  • Large Capacity Bags: The 13.2 Gallon/50 L Collection Drum has quick-release levers and independent casters for easy emptying. The canister filter captures 99% of 3-micron particles, significantly increasing filtration effectiveness. The directly-mounted feature is time-saving and labor-saving..
  • Flexible and Portable: The dust collection system features a 6-inch inlet with a removable Y-fitting with two 4-inch openings, which can be used to branch lines to service more than one machine. A 78.7 inch/2 m flexible hose ensures your long-distance work. There are four wheels. Among them, two are lockable, ensuring flexible and easy movement..
  • Wide Application: The cyclone dust collector is widely used in industries, such as machinery, textile, household appliances, food, coal, building materials, sweeper, dust removal equipment m....
Check Stock

SawStop 3HP Industrial Cabinet Saw with 36-Inch Industrial T-glide Fence System

  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.
  • 36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection.
  • DUST COLLECTION: 99% dust collection is delivered above the table with the blade guard, and below the table with advanced shrouding. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade & into the 4” port.
Check Stock

SAWSTOP 10-Inch Industrial Cabinet Saw 5-HP 52-Inch Industrial T-Glide Assembly ICS51230-52

  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.
  • 52-INCH T-GLIDE FENCE ASSEMBLY: The 52-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection.
  • DUST COLLECTION: 99% dust collection is delivered above the table with the blade guard, and below the table with advanced shrouding. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade & into the 4” port.
Check Stock

5 Inch 8 Hole Sander Replacement Pad for DeWalt - Fit DW4388, DW421, DW423, D26451/K, D26453 Orbital Sander

  • Compatible Machines: The 5 inch Hook and Loop Replacement Sander Pad for DeWalt DW421, DW423, D26451/K, D26453. Replacement Pad for Makita 743081-8, 743051-7, DeWalt 151281-08, DW4388..
  • Easy Screw-on Installation: Build-in 3 mounting screw holes for quick and easy installation, and for increased abrasive paper grip..
  • 8 Dust Collection Holes: Efficient 8-hole pad works with sanders that have dust collection system. 8 dust collection holes that vacuum up the dust and debris into Dust Bag Assembly.Ultra convenient dust collection feature..
  • Durable Construction:Designed for sanding flat surfaces, these replacement pads are made from high-quality, durable rubber for long life and engineered to provide smooth finishes, prevents damage to disc holders..
  • Save Sander & Money: The sander pads wear out before the machine does, so replacing the pads is a cost effective option..
Check Stock

SAWSTOP 10-Inch Professional Cabinet Saw 1.75-HP 52-Inch Professional TGlide Fence System PCS175-TGP252

  • 52-INCH T-GLIDE FENCE ASSEMBLY: The 52-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years....
  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table,....
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy....
  • DUST COLLECTION: 99% dust collection is delivered above the table with the available dust collection blade guard (Model # TSG-DC, sold separately),....
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to....
Check Stock

POWERTEC 70132V 14\ Table Saw Dust Hood, 1 PK

  • INCLUDES: (1) 14 Inch Table Saw Dust Collector Hood..
  • FUNCTION: Makes a great seal for dust collection hose applications, ensuring optimum air quality while increasing workshop cleanliness by efficiently collecting dust, dirt and debris..
  • VERSATILE: Ideal for a plethora of popular brand models, including Delta, Craftsman and others. Firmly attaches and secures to most table saws in a variety of positions (underneath or behind)..
  • PREMIUM BUILD: Designed for strength and long-term durability to support your dust collection system. Made with lightweight ABS plastic, featuring a high quality construction ..
  • DIMENSIONS: Accepts standard 4” ID dust collector hose or 4” ID fittings. Outer size 14-1/16” x 14-1/16” with nominal 4” OD port (actual size tapers from 3-7/8” to 4”) ..
Check Stock