Categories

Best Inch Extension

Flexible Drill Extension Hex Shank Drill Nut Driver Bit Set, 2pcs Bendable Drill Bit Extension, 3pcs 1/4 3/8 1/2\ Universal Socket Adapter Set, 105° Right Angle Drill, 3pcs Screwdriver Bit Set

  • Drill Extension Kit: This set of drill extension kit 9PCS, including 2pcs flexible drill extension, 3 pieces of 1/4 3/8 1/2" universal socket adapter kit, 3*quick release magnetic drill extension Pieces, 1*105° right-angle drill bit extension, a complete match to meet daily needs..
  • Universal Socket Adapter Set: There are 3 pieces of socket adapters in different sizes, 1/4 inch, 3/8 inch, 1/2 inch, but they have the same size hex drill bit, which is 1/4 inch.
  • You can match them with your pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool..
  • Hex Shank Flexible Drill Extension: It come with a 105° right angle drill extension bit and a 11.7 in flexible extension bit.easy, lightweight, fast, connect to the standard hex screwdriver..
  • Screwdriver Bit: 1/4 Inch Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
  • Widely Used: Installed in the installation of pneumatic screwdrivers, electric screwdrivers, pneumatic drills, manual screwdrivers and other hexagonal tools. A must-have package for conversion. Sufficient qua....
Check Stock

Tecunite 20 Pieces 3-pin Servo Extension Cable Wire Cord Female to Male RC Servo Extension Cord Wire Connectors for Servo Extension Connection Control Board Remote Control Parts(5 Sizes)

  • Servo extension cord sizes: have 5 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 4 pieces servo extension cords.
  • Application: these servo extension leads are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
  • 3-Pin servo extension wire: each servo extension has 3 pieces of 0.08TS wires, universal model.
  • Connectors with 3 pins and have an angle in case you will install incorrectly, convenient for use.
  • Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
  • Package includes: 20 pieces of female to male servo extension cable wires with 5 different lengths, enough for you to use on different occasions.
Check Stock

TecUnite 20 Pieces 3-Pin Extension Cable Cord Female to Male Wire Connectors for Servo Extension Connection Control Board Remote Control Parts(4 Sizes)

  • Servo extension cord sizes: have 4 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch and 50 cm/ 19.7 inch, each length has 5 pieces servo extension cords.
  • Application: these servo extension leads are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
  • 3-Pin servo extension wire: each servo extension has 3 pieces of 0.08TS wires, universal model.
  • Connectors with 3 pins and have an angle in case you will install incorrectly, convenient for use.
  • Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
  • Package includes: 20 pieces of female to male servo extension cable wires with 4 different lengths, enough for you to use on different occasions.
Check Stock

NEIKO 00239A Flexible Extension-Bar Set, 1/4-Inch and 3/8-Inch Drives, Flexible Socket Extension Bars, 2-Piece Set

  • FLEX BAR EXTENSION SET: The NEIKO flex extension bars, or socket extensions, quickly loosen and tighten nuts and bolts in hard-to-reach areas. These flexible extensions are great for automotive projects that need light torque applications..
  • DURABLE SPRING SHAFTS: Each piece in this 2-piece extender set features a heavy-duty chrome vanadium anvil and an anvil receiver with a mirrored chrome finish for a professional look. The tightly coiled steel springs are protected with quality PVC sleeves..
  • FLEXIBLE EXTENSION BARS: Both bars in this ratchet extension set maintain excellent rotational torque transfer from ratchet to socket, and the heavy-duty steel wound springs provide total flexibility up to 45°..
  • LOCKING SOCKET EXTENSIONS: The spring-loaded ball-detent design lets you lock the sockets securely in place without them dropping while in use. The square-drive radius corners reduce tool and socket wear on this extension tool set..
  • SIZES INCLUDED: This 2-piece set includes an 8-inch extension flex bar with a 3/8-inch drive and a 6-inch extension flex bar with a 1/4-inch drive. Add t....
Check Stock

US Cargo Control 4 Inch x 30 Foot Green Winch Straps with Flat Hook 10 Pack

  • HEAVY DUTY - US Cargo Control Blackline winch straps have a working load limit of 6,670 pounds and a break strength of 24,000 pounds making it the strongest webbing available on the market..
  • 30 INCH CHAIN EXTENSION - A 30" chain winch extension makes it easier to fully wrap the winch chain around your stake pocket. This not only provides a better, more secure hold but also gives you the full working load limit of the stake pocket..
  • FITS STANDARD 4 INCH WINCHES - These 30-foot length flatbed straps fit standard 4-inch winches..
  • GRADE 70 CHAIN - The included winch chain extension is made from strong 3/8 inch grade 70 transport chain and features a yellow zinc finish for easy identification and extra corrosion resistance and durability..
  • SPECS - BlackLine Winch Strap With Chain Extension | Webbing Dimensions: 4" X 30' | Chain Extension Length: 30" | End Fitting: Grab Hook | Working Load Limit: 6,670 lbs. | Product Weight: 5.1 Pounds | Quantity: 1 Winch Strap with Chain Extension.
Check Stock

CURT 45791 8-Inch Long Trailer Hitch Extension for 2-Inch Receiver 3,500 lbs black

  • ADDED CLEARANCE. This trailer hitch extension adds 8 inches of extra length to your hitch receiver, providing additional clearance between your bumper....
  • STANDARD FIT. This receiver hitch extension bar has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver.
  • SOLID STRENGTH. This 2-inch receiver hitch extension is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated....
  • CORROSION-RESISTANT. This heavy-duty receiver hitch extension is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and....
  • EASY TO INSTALL. Installing this trailer hitch extension is fast and easy. You can use it as needed by simply inserting the shank into your hitch....
Check Stock

CURT 45796 18-Inch Long Trailer Hitch Extension for 2-Inch Receiver, 3,500 lbs , Black

  • ADDED CLEARANCE. This trailer hitch extension adds 18 inches of extra length to your hitch receiver, providing additional clearance between your bumper and hitch accessory or trailer.
  • STANDARD FIT. This receiver hitch extension bar has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver.
  • SOLID STRENGTH. This 2-inch receiver hitch extension is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight.
  • CORROSION-RESISTANT. This heavy-duty receiver hitch extension is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch extension is fast and easy. You can use it as needed by simply inserting the shank into your hitch receiver (hitch pin sold separately). Then, hitch up your trailer or hitch accessory.
Check Stock

Fulton 6 inch Long Forstner Bit Extension For Adding Over 5-5/8 inches of Drilling Depth To Your Forstner Bit. For Wood Turners, Furniture, Carpentry and Construction

  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. ....
Check Stock

Flexible Drill Bit Extension Set & Universal Socket Tool, Bendable Drill Bit Extension, 3pcs Drill Bit Holder, 1/4 3/8 1/2\ Universal Socket Adapter Set, 105° Right Angle Drill, Screwdriver Bit Kit

  • SOCKET EXTENSION SET: Our drill extension and socket adapter set is the perfect multidriver kit for auto, mechanical, and construction jobs. This 9-piece adapter and extension bit set includes 1/4-inch, 3/8-inch, and 1/2-inch drives..
  • FLEXIBLE & COMPATIBLE: This socket adapter drill-bit set turns power drills into high-speed nut drivers. Our drill-bits socket set is compatible with universal heavy-duty power tools, including drivers, hand wrenches, and screwdrivers..
  • QUALITY METAL: Each adapter piece with the drill-bit extension is constructed with heat-treated chrome-vanadium steel to deliver long-lasting and durable strength for years of use. You can rely on this strong socket set to make light work of any job..
  • SECURITY & DESIGN: The spring-loaded ball bearings fitted on each square head securely lock into the sockets to prevent slippage during use. Each ball bearing delivers high torque power accurately and efficiently every time..
  • WHAT’S INCLUDED: This adapter set comes with four 1/4-inch, two 3/8-inch, and two 1/2-inch drives. It also includes 1 long magnetic bit extension that measures 60 mm and has a magnetic 1/4-inch bit end attachment..
Check Stock

Universal Socket Wrench Tool and Flexible Drill Bit Extension Set, Bendable Drill Bit Extension, 1/4 3/8 1/2\ Universal Socket Adapter Set, 105° Right Angle Drill Extension, Screwdriver Bit Kit

  • Drill Extension Kit: This set of drill extension kit 9PCS, including 2pcs flexible drill extension, 3 pieces of 1/4 3/8 1/2" universal socket adapter kit, 1pcs Screwdriver Bit Set, 1*105° right-angle drill bit extension, 1 x Universal Socket and 1pcs socket adapter, a complete match to meet daily needs..
  • Socket Adapter Set: There are 3 pieces of socket adapters in different sizes, 1/4 inch, 3/8 inch, 1/2 inch, but they have the same size hex drill bit, which is 1/4 inch.
  • You can match them with your pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool..
  • Universal Socket Wrench: Unique design of this universal socket can automatically adjust to any size or shape, suitable for standard 1/4 to 3/4 inches and metric 7mm to 19mm screws, nuts, and blots, meeting all your needs..
  • Bendable Flexible Drill Extension: Bendable drill bit extension can twisted and rotated at many different angles. It can be drilled into a small space, in a variety of gaps, rather than your hand, flexible installation work. Let our flexible drill bit extension tool help you solve more problems quickly..
  • Widely Used: Installed in the installation of pneumatic screwdrivers, electric screwdrivers, pneumatic drills....
Check Stock

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8\ of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)

  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstne....
Check Stock

30 Pcs 3-Pin Extension Cable Cord Male to Female Lead Wire Connectors for Servo Extension Connection Control Board Remote Control Parts - 5 Sizes

  • 5 Sizes: 5 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 6 pieces....
  • Widely Application: These servo extension lead cables are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver....
  • 3-Pin Wire Connector Design: These servo extension cable connectors with 3 pins and have an angle in case you will install incorrectly, convenient to....
  • Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the....
  • Item Quantity: Package come with 30 pieces of female to male servo extension cable wires, enough for you to use on different occasions.
Check Stock

ABN Flexible Socket Extension Cables - 4pc Flex Socket Extension Bar Set 1/4in and 3/8in Drive Light Impact Extender

  • LOOSEN FASTENERS EFFORTLESSLY: At any angle, the ABN 4-Piece Light-Duty Flexible Extension Socket Wrench Extension Set allows you to quickly and easily remove bolts and nuts in difficult to reach areas.
  • FLEXIBLE EXTENSIONS: Drill socket extension bars feature a flexible wound spring-steel shaft that bends up to 90 degrees.
  • Use the flexible extension for drill, wrench, and ratchet use to reach those tight, awkward spaces (varying tools not included).
  • SECURE HOLD: Square flexible socket driver features spring-loaded ball detents on male end and indented sockets to lock into your sockets and tools for a secure hold that prevents slipping while you work.
  • BUILT TO LAST: Drop-forged, heat-treated chrome-vanadium steel provides maximum strength and longevity while the mirror chrome finish resists rust and corrosion.
  • Square drive radius corners reduce wear and increase torque-transfer from flexible ratchet extensions to sockets.
  • PRACTICAL FOR HARD TO REACH FASTENERS: Flexible socket set includes 4 bars: a 12 inch long 3/8 inch drive, 150 G/PC, an 8 inch long 3/8 inch drive, 109 G/PC, ....
Check Stock