Categories

Best Inch Steel Ball

MYCAN Trailer Hitch Ball Mount Forged Solid Steel Fits 2 1/2' Receiver Hitch Class 5 Hitch Ball Mount Towing 2' Drop, 1/2' Rise 20,000 lbs 1-1/4' Hole Commercial Duty MCFT252

  • Heavy Duty Forged Steel: MYCAN trailer hitch ball mount is constructed from high-strength solid forged steel and this hitch ball mount is rated to tow up to 20,000 pounds gross trailer weight and 2,700 pounds tongue weight (limited to lowest-rated towing component).
  • 2 Inch Drop and 1/2 Inch Rise: MYCAN Towing ball mounts comes with a 2-1/2-inch x 2-1/2-inch shank to fit virtually any industry-standard 2-1/2-inch trailer hitch receiver. The tow ball mount also has a 4-inch drop and 2-1/2-inch rise to promote level towing.
  • 2 1/2 Receiver Hitch: Hitching up your trailer is easy with this 2 1/2 inch ball mount. MYCAN forged trailer hitch ball mount features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank.
  • Corrosion-Resistant: For long-lasting use, this trailer hitch ball mount 2 1/2 inch is with highly durable carbide black powder coat finish, solid trailer hitch ball mount easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • Easy to Install: To install this class 5 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2 1/2 inch trialer hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin.
Check Stock

KAITWOSON Trailer Hitch Ball Mount with 2 inch Hitch Ball & Pin

  • SPECIFIC DATA. The trailer hitch ball mount made of welded steel, 2-inch by 2-inch shank hollow handle, 2-inch hitch ball, 5/8-inch pin and clip, 8-1/4-inch overall length, 2-inch drop, accepts a 2-inch coupler.
  • SCOPE OF APPLICATION. The trailer hitch has a 2 inch x 2 inch handle, suitable for most 2 inch receivers, It is hollow and welded with heavy duty steel to bring a sense of better in use.
  • CORROSION PROTECTION. For long term use, this hitch ball bolt is protected by a durable black and chrome powder coating finish. These topcoats resist rain, dust, snow, road salt, and other corrosive substances.
  • EASY TO INSTALL. Hitching up your trailer is easy with this ready-to-use trailer hitch tri ball mount.The round handle makes mounting easy and just insert the handle into the 2-inch trailer hitch receiver of the vehicle.
  • READY TO TOW. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver, words under cars, light trucks, SUVs, vans, ATVs and more.
Check Stock

SINGER 00358 Pearlized Head Straight Pins, Size 20, 90-Count

  • Set of 90 assorted pearlized, colored head straight pins.
  • Colored head pins are easy to spot and fun to use when using patterned or colored fabric.
  • Made from rust resistant nickel-plated steel.
  • Each package contains 90 pearlized ball head straight pins.
Check Stock

DURATECH Heavy Duty Ball Joint Press & DURATECH 7-Piece Pliers Set

  • ...4-wheel drive (4WD) adapter. The Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
  • DURATECH Heavy Duty Ball Joint Press - Made from heavy-duty forged steel technology, through the Charpy impact test, black oxide coated on the adapter with a robot hands helps improve oxidation and corrosion resistance, ensuring durability and long life. It is even ideal for professional mechanics.
  • DURATECH 7-Piece Pliers Set - Professional forged Cr-Ni Steel & high quaility steel, heat-treated, provides high strength and durability. Chrome plated for rust resistance, with high hardness and wear resistance.
  • DURATECH 7-Piece Pliers Set - DuraTech tools stylish and beautiful design pliers set are equipped with TPR material handle, extremely comfortable to hold and use, making it easy to operate while you work.
Check Stock

YeahaWo Gazing Balls for Garden, Home Outdoor Hollow Sphere Stainless Steel Gazing Globe Mirror Ball (12 Inch)

  • ✿ Package List: 1 x Stainless Steel Gazing Globe (Well packed in box).
  • ✿ It's shiny and reflective. It looks great as the centerpiece of your garden..
  • ✿ Perfectly spherical, they may be used for multiple applications both indoors and out..
  • ✿ Creates amazing focal points when used in your garden. ---garden gazing globes, gazing balls for gardens 10 inch gazing ball, gazing ball, steel gazing ball, mirror sphere, mirror gazing ball, outdoor gazing globe, rainbow gazing ball, steel gazing balls for gardens, mirror ball garden, gazing globe ball, stainless gazing ball, globe mirror, clear gazing ball, outdoor mirror ball, gazingball.
  • ✿ Mirror metal gazing globe decorative accessories garden ornament. ---mirror sphere ball, sun gazing globes, garden gazing ball stainless steel, mirror balls for garden, garden gazing ball, stainless gazing globe, mirror ball for garden, stainless globe, small gazing globes, gazing globe ball, gazingballs, mirror ball stainless steel, mirror globe ball, steel globe.
Check Stock

KAITWOSON Trailer Hitch Ball Mount with 2 inch Hitch Ball & Pin, 4-inch Drop

  • SPECIFIC DATA. The trailer hitch ball mount made of welded steel, 2-inch by 2-inch shank hollow handle, 2-inch hitch ball, 5/8-inch pin and clip, 9-inch overall length, 4-inch drop, accepts a 2-inch coupler.
  • SCOPE OF APPLICATION. The trailer hitch has a 2 inch x 2 inch handle, suitable for most 2 inch receivers, It is hollow and welded with heavy duty steel to bring a sense of better in use.
  • CORROSION PROTECTION. For long term use, this hitch ball bolt is protected by a durable black and chrome powder coating finish. These topcoats resist rain, dust, snow, road salt, and other corrosive substances.
  • EASY TO INSTALL. Hitching up your trailer is easy with this ready-to-use trailer hitch tri ball mount.The round handle makes mounting easy and just insert the handle into the 2-inch trailer hitch receiver of the vehicle.
  • READY TO TOW. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver, words under cars, light trucks, SUVs, vans, ATVs and more.
Check Stock

HITOWFMG 2 Adjustable Tri-Ball Mount Drop Hitch Trailer Hitches Ball Mount 5-3/4 Drop/Rise

  • Fits 2 inch square receivers hitch tube, use 5/8" hitch pin or lock , It's perfect for most class 3, class 4 and class 5 hitches.
  • Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. The 1-7/8-inch ball is rated for a capacity of 6,000 lbs., the 2-inch ball for 7,500 lbs. and the 2-5/16-inch ball for 10,000 lbs..
  • The maximum pulling of the 1-7/8" ball is 3500Lbs, 2" ball is 5000Lbs, 2-5/16" ball is 7500Lbs. So it could be applied in most vehicles and eliminates the need for multiple ball mounts..
  • With the anti-rattle stabilizer bolts providing a smooth and quiet towing experience, come with a wrench for the botls.
  • Heavy duty steel via robotically welded for superior strength and precision CNC milled and drilled provide excellent mounting facility, high quality hardware fittings, all make this adjustable trailer hitch more durable.
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...d for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconnect and push down on the correct ball lock (gas/fluid will flow once connected).
  • 5/16-inch barb connects your hose and screws/unscrews from fitting.
  • Included hose clamps tighten seal on hose and are winged for easier use.
  • PACKAGE CONTENTS: CO2 Ball Lock Disconnect Stainless Steel Keg Lock package includes (12) pieces total (6 per keg) – (2) ball lock liquid disconnect fittings, (2) ball lock gas disconnect fittings, (4) swivel nuts, and (4) hose clamps for your convenience.
Check Stock

ORTUR 24V Laser Engraver 2 Pro-S2-LF, Laser Machine 5.5W Output Power, Laser Cutter for Metal and Wood 400 * 400mm (LU2-4)

  • 【FRIENDLY DESIGN】: Like larger vises, the Micro Block is made of solid stainless steel and treated with a special anti-glare treatment to reduce eye strain. It has a self-centering jaw system and an adjustable internal braking system that allows the user to select the amount of rotational resistance.
  • 【MAIN PARAMETER】 - Product: Ball vise. Material: Stainless steel. Ball diameter: 78mm (3 inch). Height: 85 mm (3.34 inch). Max. opening: 54 mm (2.13 inch). Base diameter: 98 mm (3.85 inch).
  • 【EXCELLENT QUALITY】- Full set standard block ball vise engraving tool: This block is made of solid galvanized steel, come with 30pcs attachment and 3-inch diameter ball.
  • 【ROTATIONAL BRAKE SYSTEM】- The internal rotational brake system lets the user choose the amount of rotational resistance from free to locked. There is a double ball bearing system for smooth rotation without looseness or wear inside.
  • 【WIDE APPLICATION】- The engraving ball vise is perfect for stone setting, small engravings, and other precision work. Designed for a unique combination of solid work support in a small and maneuverable size. Its low profile is suited for microscope work.
Check Stock

Weigh Safe WS4-2-KA 4

  • PROPRIETARY TONGUE WEIGHT SCALE: Our built-in high strength stainless steel scale makes managing your trailers weight distribution both safer for you and your family by ensuring a properly balanced trailer load and simple by instantaneously providing a tongue weight measurement every time you couple your trailer. This eliminates the need to purchase additional tongue weight scales, which can cost you hundreds of dollars, and increases the speed at which you properly set up your trailer..
  • ADJUSTABLE BALL MOUNT: This 4 Inch drop hitch is a dream come true, allowing you to tow trailers of different heights with the same vehicle. The drop hitch adjusts in 1" increments so you get the perfect fit every time. All Weigh Safe ball mounts come standard with a high strength Dual Pin Lock that secures your trailer to your drawbar. All our locks come standard with a custom fitted dust cover to increase longevity. Fits 2 Receivers -SUV's, F-150, Chevy 1500, Ram 1500, Tundra, Titan, etc.
  • HEAVY-DUTY TOWING CAPACITY (GTW 12,500 LBS): Made of 15 lbs. of solid Aircraft Grade Billet Aluminum & Stainless steel this hitch is as tough as they come, with a towing capacity (GTW) of 12,500 lbs. on the 2 5/16" ball, 8,000 LBS on the 2" ball, and 1,500 lbs. max tongue weigh....
Check Stock

DANCO (88532) Universal Pop-Up Drain Ball Rod Assembly

  • REPLACeS most ball rod assemblies and is intended for bathroom aapplications.
  • INCLUDES: (3) sizes of pop-up balls for versatility and (2) cone washers for easy installation.
  • DURABLE CONSTRUCTION - The durable yellow zinc dichromate plated steel is made to deliver reliable results..
  • DIMENSIONS - SMALL BALL Diameter = 15mm (0.59 inch) with distance from edge of ball to end of gray rod = 30mm (1.18 inch).
  • MEDIUM BALL Diameter = 17mm (0.67 inch) with distance from edge of ball to end of gray rod = 28.5mm (1.12 inch).
  • LARGE BALL Diameter = 18.3mm (0.72 inch) with distance from edge of ball to end of gray rod = 27.5mm (1.08 inch). Diameter of the gray rod tapers from about 5mm (0.2 inches) where it meets the ball to about 4.5mm at the tip. The rod is 150mm (5.9 inch) in length and 5.5mm (0.22 inch) in diameter. When you screw the rod into the ball, it will go in about 4mm (0.16 inches)..
Check Stock

VESLA HOME Commercial Single Handle Pull Out Stainless Steel Brushed Nickel Kitchen Faucet Kitchen Sink Faucets with Pull down Sprayer

  • Thickness: 0.75 inch, 1 pair 16 inch heavy duty drawer slides, Mounting screws included. Attention: the....
  • Made from high-grade cold rolled steel that is zinc plated. Surface prevent rust. Three-section drawer slide offer Load-bearing 250LB..
  • Ball-bearing design, the drawer can be closed silently and smoothly. Steel ball-bearing action that offer less noise at closing and opening..
  • Side mounted Steel ball-bearing action, Internal rail separation is simple and easy to install and remove drawer.Ball bearing:This feature can make....
  • Before purchasing, please measure the depth of your cabinet and select the correct drawer slides. VESLA HOME soft close drawer slide stay by a....
Check Stock

CURT 40053 Stainless Steel Trailer Hitch Ball, 6,000 lbs, 2-Inch Diameter, 1 x 2-1/8-Inch Shank

  • RELIABLE STRENGTH. This trailer hitch ball is rated to tow up to 6,000 pounds gross trailer weight. It is constructed from corrosion-resistant stainless steel for reliable towing strength and confidence on the road ahead.
  • PRECISE FIT. This tow hitch ball has a 2-inch diameter to fit virtually any 2-inch coupler. The ball shank has a 1-inch diameter and measures 2-1/8 inches long for secure attachment to a trailer hitch ball mount.
  • CORROSION-RESISTANT. For exceptional resistance to rain, mud, road salt and other corrosive threats, this hitch ball is constructed from stainless steel, providing excellent strength while maintaining long-lasting rust prevention.
  • SECURE INSTALL. For dependable strength, this trailer hitch ball comes with a zinc-plated hex nut and helical lock washer. It also has fine threads for an enhanced hold on the ball hitch (250 lb.-ft. torque required).
  • TESTED FOR SAFETY. To promote the highest level of safety while towing, this CURT tow ball is tested to U.S. VESC specifications.
Check Stock