Categories

Best Inch Tapered Bearing

OTC 6542 Bearing Cup Remover

  • OTC's 6542 Bearing Cup Remover tool is ideal for servicing hubs on today's popular front-wheel-drive small cars.
  • Tapered metal cone holds the jaws securely in place during pulling.
  • Perfect for pulling internal bearing cups, seals, bushings, etc..
  • Jaw spread is 15/16 inch to 3-1/4 inches and reach is 3-1/2 inches.
  • use with any 5/8-18 threaded slide hammer such as OTC's No. 1155 or 1156 as well as OTC's No. 927 Push-Puller.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

Powerbuilt Alltrade 648649 Kit 21 Clutch Pilot SAE/MM Tool Set Silver

  • Made to be the most reliable tools in the market today.
  • Tool set for aligning clutch components when installing a new clutch.
  • Aligns clutch plate and disc to pilot bearing.
  • Includes tapered cone clutch plate adapter and centering shaft.
  • Adapters included: 1.18/0.984-Inch, 17/15mm, 15.8/12mm, 0.874/0.812-Inch, 0.787/0.749-Inch, 0.718/0.668-Inch, 0.624/0.614-Inch and 0.590/0.561-Inch.
  • Kit 21 includes 8-Piece for aligning clutch components when installing a new clutch.
Check Stock

uxcell T101/904A1 Thrust Tapered Roller Bearings 1.01\ Bore 2\ O.D. 0.625\ Width

  • Package Content : 1 x Tapered Roller Bearing.
Check Stock

Tapered Axle Bearing and Seal Replacement for 9 Inch Big Fits Ford Hou

  • Replacement axle bearing for big bearing new style Ford axles commonly referred to as the Torino bearing or "Set 20".
  • Tapered bearing design supports greater loads than old style roller bearings.
  • A new bearing retainer collar is included to ensure no movement of the bearing when in use.
Check Stock

All Balls 22-1039 Steering Bearing Kit

  • Specs: Crank Shaft Bearing Kit , 2 Seals, 2 Tapered Bearings.
  • Kits contain upper and lower tapered bearing sets (cup & cone) along with specially designed seals tkeep water and dirt out and grease in.
  • Compatible With/Replacement For: Aprilia Caponord 1200 2014-2017, EVT Caponord 2001-2007, RST 1000 Futura 2001-2004, RSV Mille 2000-2003, RSV Tuono 2002-2005, RSV4 APRC R 2009-2015, RSV4 FACTORY 2009-2015, RSV4 RF 2016-2018, RSV4 RR 2016-2017, RSVR 2004-2008, SL 1000 Falco 2000-2003, Tuono 1000 R 2006-2015, Tuono 1100 V4 2016-2018, Tuono 1100 V4 RR 2016-2018, Ducati 1098 2007-2008, 1098 R 2008, 1098 R Bayliss 2009, 1098 S 2007-2008, 1098 S Tricolore 2007-2008, 1198 2009-2010, 1198 R 2010.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement..
  • 100% New aftermarket Crank Shaft Bearing Kit built to meet OEM specifications.
Check Stock

Shoichio Resistance Training Folding Cover Bicycle Cycling Trainer Roller Station Exercise MTB Road Bike Fitness Exercise Machine

  • Adjustable Front Wheel Bracket: Available in seven different distances, compatible with more models, for 24-29 inch mountain bike / 700c road bike..
  • PP roller: The PP material roller is used to reduce the noise generated when the platform is used to mount the roller, and it will not affect the neighbors..
  • Symmetrical tapered bearing: symmetrical tapered roller with low friction and low kinetic energy loss to restore true driving feeling. Reduce wear on bicycle tires..
  • Aluminum alloy material: It is stronger and stronger with high strength aluminum alloy + ABS engineering plastic. It is durable and relieves vibrations, making riding more stable..
  • Pedal design: non-slip wear pedal design and easy to put on and take off, easy to assemble and use more convenient..
Check Stock

HARFINGTON 2pcs 1029 Self-Aligning Ball Bearings 9mm Bore 26mm OD 8mm Thickness Open Type Nylon Cage for Transmission

  • Self-aligning bearing for applications subject to shaft deflections or misalignments between the shaft and housing.
  • Tapered bore with 1:12 taper for compensating for a flexing shaft or fitting to a tapered shaft.
  • Steel cage evenly spaces balls for reduced friction, vibration and noise.
  • Open bearing for lubrication applied in place.
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision.
Check Stock

CARTMAN Wiper Arm Battery Terminal Bearing Remover Puller Tool

  • Repair tool can remove the stuck battery terminal, also remove bolted-on windshield wiper arms that fit over a tapered spline.
  • Great multi-function small repair tool designed for professional use.
  • Battery terminal puller overall forged by carbon steel is durable and exquisite appearance. It can easily remove stuck battery terminal,also remove bolt on windshield wiper arms that fit over a tapered spline.
  • Sturdy, Durable & Long Time Service -- This Battery Bearing Extractor Puller is made of strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Easy to Operate & Quality Assurance: Jaw opening 6-28 mm for wiper arms with an o/d up to 42 mm.
  • With our battery bearing puller you can get a great helper to handle with difficult tasks.
Check Stock

Axle Bearing & Oil Seal Kit 6671138 1321607 1321608 Replacement for Bobcat S220 S250 S300 863 873 S750 S770

  • Aftermarket Axle Wheel Bearing Kit, Direct Replacement.
  • High Quality Bearing & Cup Set, High Strength,Durable.
  • Replacement for Bobcat S220 S250 S300 S330 853 863 873 883 S630 S650 S740 S750 S770.
Check Stock

WINMAX TOOLS AUTOMOTIVE Axle & Front Wheel Hub Puller – Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler (Type Hexagon)

  • EASY BRAKE & BEARING REPAIR: The WINMAX Axle Remover & Front Wheel Puller Hub Grappler Tool makes for easy brake and bearing maintenance.
  • WORKS ON YOUR VEHICLE: Compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs.
  • VARIOUS APPLICATIONS: Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles.
  • BUILT TO LAST: Heated pressure screw holds up to tough use.
  • Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that is drop forged for maximum strength and longevity that resists rust and corrosion.
  • PERFECT SIZE: Yoke and bolt PERFECT SIZE: Yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applicationsare threaded 5/8-inch x 18 inches to best suit most vehicle applications.
Check Stock

30206 Tapered Roller Bearings, Single Row 30x62x17.25 mm Same Day Shipping

  • Tapered Roller Bearing Set (Cup and Cone).
  • Bearing ID: 1.25” (31.750mm) Cone Width: .6600” (16.764mm) Bearing Width: .6250” (15.875 mm).
  • Cup OD: 1.7810” / 45.237mm Cup Width: .4750” / 12.065mm.
Check Stock

2 Set Fits for 1-1/16'' Axles Trailer Wheel Hub Bearings Kit, L44649/L44610,1.0625' ID, 1.9800' OD, 0.560' Width，12192TB Seal OD 1.980'',Dust Cover and Cotter Pin.

  • Kit Includes: 4 Pieces L-44649 Bearings 1-1/16 Inch Inside Dimension, 4 Pieces L-44610 Bearings 1.98 Inch Outside Dimension,2 Pieces 12192TB Seal, 2 Pieces Cotter Pin and 2 Pieces Dust Cover.
  • Performance: Cone (inner ring assembly) and cup (outer ring) combine to form a complete single tapered roller bearing.
  • Advantage: Rotating quiet and high speed, high quality chrome steel bearings are rugged and durable.Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise.
  • Bearing- 100% dimensional tolerance, noise and vibration inspection, for optimal installation and performance.
  • Fits for: Trailer axle hub wheel for 1-1/16'', Perfect for those on the road repairs!Applied to automobiles, mills, mines, metallurgy, plastic machinery and other industries.
Check Stock

TRUSTMI 16 Inch Shower Arm with Flange S-Shape Stainless Steel Overhead Shower Head Replacement Pipe Arm Brushed Nickel

  • Heavy duty stainless steel construction, 16 inches length for you to enjoy rainfall shower, fit for all standard 1/2-inch connection top showerhead.
  • Brushed Nickel finished, scratch and corrosion resistant, non-rust.
  • U.S. standard 1/2 inch NPT tapered thread to wall, 1/2 inch IPS straight thread to shower head.
  • 0.59"(15mm) inside diameter and 0.87"(22mm) outside diameter, toughness enough for your large shower head.
  • Flange with rubber to protect shower arm from scratching. S-shape design to enhance its bearing capacity. Easy installation, tools free..
Check Stock