Categories

Best Inch Tft Touch Screen

BIGTREETECH Upgrade PITFT50 V2.0 Graphic Smart Display DSI Interface 5 inch LCD Touch Screen Suitable for Raspberry Pi

  • 1) This is a 5-inch LCD touch screen with a resolution of 800 x 480 for Raspberry-Pi. The display area can reach 108 x 64.8mm..
  • 2) Adapt to the Raspberry-Pi DSI display interface, directly driven by DSI.
  • with a capacitive touch panel. Supports 5-point touch..
  • 3) The unique hole design on the back allows you to install the Raspberry-Pi directly. PI TFT50 display adopts Raspberry-Pi power supply design, no external power supply is needed..
  • 4) The PI TFT50 display supports hardware backlight adjustment, and the backlight brightness can be adjusted by rotating the potentiometer behind the screen..
  • 5) If you encounter any problems after receiving the product, please contact us via Amazon. We have professional technical after-sales personnel to solve your problems. Thanks for your cooperation..
Check Stock

Ili9341 LCD Display Module, ILI9341 5V/3.3V 2.8\ TFT SPI Serial Port LCD Touch Panel Display Module, 240x320[with Touch(9 IO Drive)](Without Touch)

  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch). 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
  • Buy it Confidence: Let you feel safe using, so you have a better using experience. Great value for money. If you have any problems, please fell free to contact us anytime. Our team w....
Check Stock

DIYmalls ILI9341 3.2 inch TFT LCD Display Screen Module 3.3V Resistive Touch Panel 320x240 w/SD Card Slot for Mega 2560 only

  • ILI9341 tft display has 40 pins, so it is not compatible with uno r3 and nano..
  • ILI9341 display works at 3.3V. If you use it with mega 2560, please insert TFT 3.2 shield, not directly connect board with tft lcd module..
  • You may need to set a suitable parameter in sketches to use this 3.2" touch screen, but it is not a difficult task..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
  • ili9341 3.2 inch tft lcd can not work with esp32 board due to no SPI interface..
Check Stock

Replacement Nintendo DS Stylus In Black pack of 2 by Mars Devices

  • Compatible With: For Nintendo DS Lite Or Resistive TFT Touch Screen. For Arudino TFT Screen..
  • Keep your screen free from scratches and fingerprints..
  • Easily snaps inside a convenient storage slot on the back..
Check Stock

Ciyoo N1 IP67Waterproof Fitness Smartwatch for Women ,Fitness Tracker Watch with Heart Rate Monitor Step Sleep Tracker Jewelry Watch White

  • Fashion Design -Fashion women appearance design, low-key and simple watch strap and flip the wrist screen switch, show a unique charm design.Finally,....
  • The intelligent LED display design allows you to quickly and easily adjust the pattern with your fingertips. The bracelet will vibrate to remind you....
  • Large screen full touch, TFT true color screen.
  • High Sensitivity Touch Screen - The 0.66 inch white light level screen allows information to be clear on the screen.With the round screen operation,....
  • Convenient Health Count —This journey smart watches, by scanning or code, “Droihealth " in the app store market search in real-time records your....
Check Stock

Adafruit Power Relay FeatherWing [ADA3191]

  • High speed SPI display with digital I2C touchscreen driver.
  • Single-touch capacitive touch bonded on top.
  • 240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer.
  • We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller.
  • Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT.
  • Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4.
  • That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD.
Check Stock

3.5 inch TFT LCD Display Screen, 320x240 Resolution Compatible Display Module, LCD Display Screen 54pin

  • 【HIGH QUALITY】▶RGB LCD Display Screen is 100% brand new and high quality..
  • 【DISPLAY SCREEN】▶This product is 3.5inch TFT LCD display screen, with resolution of 320RGB x 240..
  • 【COMPATIBLE】▶This TFT LCD display is compatible with LQ035NC111 54pin LCD..
  • 【THREE MODES】▶The TFT LCD screen has 3 kinds display mode: TN, Normally White, and Transmissive..
  • 【INTERFACE】▶Signal interface digital RGB (8/24-bit) + Serial Peripheral Interface, CCIR601/656 , 54 pins , FPC..
Check Stock

Longruner 7 inch Raspberry Pi Touch Screen Case Holder for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems LSC7B-1

  • Application: (Our 7 inch touch screen : B071X8H5FB) This Acrylic Protective Case Bracket Suitable for raspberry pi 7 inch TFT touch screen, the screen....
  • Assemble: we have attached the 7 in screen Case assembling instruction in QA, please refer to it If you need. Or you could let us know, we will send....
  • Material: This RPI Case Holder is made with Black acrylic. Screen, Raspberry pi and cable are not included, case only..
  • Saves space: Raspberry Pi board can be installed on the back..
  • Kindly Note: there is a film in each Case component, please remove it before assembling it..
Check Stock

Kuman 7 inch Raspberry Pi Touch Screen Case Holder

  • Application: This Acrylic Protective Case Bracket Suitable for raspberry pi 7 inch TFT touch screen, the screen size can be....
  • Material: This RPI Case Holder is made with Black acrylic. Screen, Raspberry pi and cable are not included, case only..
  • Assemble: We have attached the 7 in screen case assembling instruction in QA, Please refer to it if you need. Or you could let us know, we will send....
  • Saves space: Raspberry pi board can be installed on the back..
  • Kindly Note: There is a film in each case component, please remove it before assembling it..
Check Stock

Aluratek 8 Inch LCD Digital Photo Frame with Auto Slideshow Using USB SD/SDHC (ADPF08SF) - Black

  • The unit does not have a touch screen. There is no built in memory. There is no built in battery. There is no remote control included.
  • View hi-quality digital photos on the 8 Inch TFT true color LCD at 800 x 600 resolution. High quality wood frame with easy to use controls.
  • Photo slideshow mode will begin automatically once the frame is powered on.
  • Supports various picture formats as most file formats are automatically recognized.
  • Supports SD / SDHC memory cards (up to 32 GB).
  • Connect a USB flash drive or SD card to easily access and share your favorite photos.Frame adjustable for vertical orientation.Dimensions: 8.5 x 1 x 7 in. (21.6 x 2.5 x 17.8 cm).
  • Weight: 1 lb. (16 oz).Package Contents: 8 Inch Digital Photo Frame,Frame Stand, Power Adapter, Quick Start Guide, Registration Card / Warranty Card - 1 year.
  • View hi-quality digital photos on the 8" TFT true color LCD at 800 x 600 resolution.
  • Supports memory card formats such as: SD / SDHC.
  • Frame stand adjustable for vertical orientation.
Check Stock

Nextion Display 3.5 NX4832T035 Resistive Touch Screen UART HMI LCD Module 480 x 320 + Acrylic Case Enclosure Transparent for Arduino Raspberry Pi

  • NX4832T035 is nextion 3.5 basic screen: 3.5 inch TFT, 480x320 resistive touch display, 16M flash, 2K Byte RAM, 65k colors..
  • You can power nextion 3.5 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

7inch DSI LCD 800×480 for Raspberry Pi 4B/3B+/3A+/3B/2B /B+/A+ and Compute Module 4/3+/3, 800×480 Capacitive Touch Screen Monitor

  • 7inch DSI LCD,7inch TFT screen. 800x480 hardware resolution.
  • Capacitive touch panel, support 5-point touch.
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+ and Compute Module 4/3+/3,but Compute Module 4/3+/3 requires extra adapter board.
  • Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free..
  • DSI interface, refresh rate up to 60Hz. Support backlight adjusts by software..
Check Stock

DIYmalls 3.2 inch TFT Shield LCD Display Module 400x240 ILI9327 Resistive Touch Screen 5V onboard Temperature Sensor for Arduino UNO R3 Mega 2560

  • This 3.2 tft lcd display has 32 pin interface onboard, so connecting with uno r3 and mega 2560 is easy..
  • Onboard SD card slot help to use 3.2 inch touch screen more conveniently..
  • You will receive 1pcs resistive touch screen and 1pcs touch pen..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock