Best Inch Tri Clamp

DERNORD Silicone Gasket Tri-Clover (Tri-clamp) O-Ring - 2.5 Inch (Pack of 2)

• Silicone gasket fit standard 2.5" tri-clover or tri-clamp fittings, apply to Pipe Outer Dia: 63.5mm / 2.5".
• Made from food grade Silicone Rubber, EPDM Synthetic Rubber.
• O-Ring/Gasket, 2.5 inch Tri-clover (Tri-clamp) Heater with highest Chemical Resistence.

BVV Pre-Cut Stainless Steel Mesh for Tri-Clamp Filter Plates 100 Mesh (150 Micron)-2-inch

DERNORD Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover ( 4' Tube OD )

• Tube OD: 4 Inch, Ferrule Size: 102MM, Fits 4 Inch Tri-clamp.
• Temperature Rating (spec): 15°F thru 200°F.
• Tri-Clamp butterfly valve Max Pressure 1.6MPA.
• 100 Percent pressure hydraulic tested for reliability.
• The pull style handle allows you to set the valve in three different positions simply by pulling and turning.

DERNORD Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover (1.5\ Tube OD)

• Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
• Temperature Rating (spec): 15°F thru 200°F.
• Tri-Clamp butterfly valve Max Pressure 1.6MPA.
• 100 Percent pressure hydraulic tested for reliability.
• The pull style handle allows you to set the valve in three different positions simply by pulling and turning.

Dernord 2 Inch (OD64) Tri-clamp Ripple Heating Element Electric Water Heater 5500W 240V

• Stainless Steel Tri-clover Clamp 2 Inch (OD64), fit 2″(51mm) pipe if that pipe has a 2″ flange for triclamp.
• With SUS304 Materials Cap,easy to Install and fits Standard 2″ tri-clover coupler of American.
• Nylon Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm.
• SUS304 Tri-clamp Ripple Foldback heating element provides 5500w 240v of power.
• Resists dry firing, lime deposits, and sand that would burn out ordinary elements.

DERNORD Butterfly Valve with Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 Inch Tri Clamp Butterfly Valve)

• Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
• The Trigger style handle butterfly valve - 13 Positions.
• Temperature Rating (spec): 15°F thru 200°F.
• Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
• The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.

DERNORD 1.5" Inch (OD50.5mm) Tri-clamp Ripple Heating Element Electric Immersion Water Heater 5500W 240V

• Stainless Steel Tri-clover Clamp 1.5″ Inch (OD 50.5mm) , fit 1.5″(38mm) pipe if that pipe has a 2″ flange for triclamp.
• SUS304 Tri-clamp Ripple Foldback heating element provides 5500w 240v of power.
• The shape is to minimize length and maximize heated surfaces.
• Easy to Install and fits Standard 1.5″ tri-clover coupler of American.
• Prevent dry firing, lime deposits, and sand that would burn out ordinary elements.

QMINOX 2 Inch × 1.5 Inch Sanitary Fitting End Cap Reducer Stainless Steel 304 Sanitary Concentric Reducer Tri Clamp Clover

• End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp.
• End Cap Reducer Ferrule Size 50.5mm = 1.5 Inch Tri Clamp.
• Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis.
• Sanitary Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
• Stainless Steel 304 Sanitary Fitting for Resistance to Corrosion and High Temperatures.

DERNORD Butterfly Valve with Blue Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 inch Tri Clamp Butterfly Valve)

• Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
• DERNORD Trigger style handle butterfly valve - 13 Positions.
• Temperature Rating (spec): 15°F thru 200°F.
• Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
• The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.

Metaland 2' Tri Clamp Clover, Stainless Steel Single Pin Heavy Duty Sanitary Tri Clamp Clover for Ferrule OD 64mm (Pack of 2)

• 【Material】Stainless Steel 304, Internal and External Polished. 100% suitable for sanitary purpose, seamless construction for greater burst strength..
• 【Size】2 Inch Tri Clamp (For Ferrule OD 64mm).
• 【Come with Silicone Gasket】Buy clamp and get same quantity free silicone gasket..
• 【Application】Apply for food and beverage, manufacturing, medical industries, chemical processing, aerospace and automotive..
• 【Quantity】Package including 2pcs tri-clamp clover and 2pcs silicone gasket..

DERNORD Tri Clamp Bowl Reducer Sanitary Fitting Stainless Steel 304 (Tri Clamp Size: 4 inch x 2 inch)

• Bowl Reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
• Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
• Stainless steel 304 for resistance to corrosion and high temperatures.
• Tri Clamp Bowl Reducer Ferrule Size 119MM fits 4" tri clamp.
• Tri Clamp Bowl Reducer Ferrule Size 64MM fits 2" tri clamp.

DERNORD 2 Pack 1.5 Inch Tri Clamp Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover 1.5 Tri Clamp Butterfly Valve

• Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
• Temperature Rating (spec): 15°F thru 200°F.
• Tri-Clamp butterfly valve Max Pressure 1.6MPA.
• 100 Percent pressure hydraulic tested for reliability.
• The pull style handle allows you to set the valve in three different positions simply by pulling and turning.

DERNORD 1.5 Inch Tri Clamp Clover Butterfly Valve with Trigger Handle Sanitary Fitting Stainless Steel 304 2 Pack 1.5 Inch Trigger Butterfly Valve

• Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
• The Trigger style handle butterfly valve - 13 Positions.
• Temperature Rating (spec): 15°F thru 200°F.
• Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
• The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.