INCRA Mast-R-Lift-II Router Lift

  • Exclusive INCRA MagnaLOCK reducing ring system (3/8-Inch, 1-Inch, 1-5/8-Inch, 2-5/8-Inch, 3-5/8-Inch) for instant ring changes and perfect ring fit.
  • Change router bits from the top of the table. Quickly make super precise, 0. 001-Inch height adjustments from above.
  • 9-1/4-Inch x 11-3/4-Inch x 3/8-Inch plate size is compatible with all INCRA Router Tables and fits some other brands.
  • Exclusive ball bearing mechanism for super smooth action and low friction.
  • Patented thread tensioning system eliminates vertical lash in the lift mechanism. Ultra-responsive, direct drive 16TPI lift screw mechanism.
Check Stock

INCRA Build-It T-Slot Panel Connector 18-inch

  • The Incra Build-It Modular Jig &Fixture System is a highly versatile collection of jig and fixture "building blocks".
  • Simply connect the parts with a screwdriver and the included fasteners to produce in minutes what used to take hours or even days.
  • From tenoning jigs and crosscut sleds for your table saw to coping sleds for your router table.
  • You can build the perfect jig in minutes with INCRA’s new Build-It System.
  • Shooter boards, crosscut boxes, tenoning or tapering jigs and everything in between, the possibilities are endless.
Check Stock

SWAG Off Road Incra V27 Miter Gauge

  • The INCRA V27 miter gauge is made in the USA, and build to last as long as our tables..
  • The V27 features four adjustable expansion joints to eliminate any side play in the miter track..
  • The V27 also features their AngleLOCK indexing for quick tool free angle adjustment..
Check Stock

Incra FLIPSHOPSTOP Adjustable Dual, FLIP-Shop Stop Positioner (for the Flip Fence only)

  • The Flip Shop Stop works great with all INCRA Flip Fences.
Check Stock

INCRA TINYT03 Precision Tiny T-Rule 3-Inch

  • 3" by 4.5" size fits in your shop apron pocket.
  • INCRA's patented marking holes at every 1/16th, 32nd, and 64th from 0 to 3 inches.
  • Micro-fine marking holes and slots place your mark exactly on target.
  • T-bar follows the edge of your work piece to mark perfectly placed horizontal or vertical lines.
Check Stock

CMT 811.096.11, Straight Bit, 1/4-Inch Shank, 3/8-Inch Diameter, Carbide-Tipped

  • 1-Inch Cutting Length, 2-1/2-Inch Length, 2 Cutting Edges.
  • Smooth and precise cut Exceptional chip ejection to allow cleaner and more constant cutting.
  • CMT bits were rated the best overall in comparison to other brand (Test by Wood Magazine).
Check Stock

INCRA I-BOX Jig for Box Joints

  • To get right to the point, the new Incra I-Box is the most advanced tool ever produced.
  • Its revolutionary design allows faster setup, greater versatility, and improved user safety compared to traditional jigs.
  • At the same time, it's easy to use and the included 1 hour instructional DVD covers everything from basic setup to advanced decorative joinery.
  • Use it on your table saw or router table to cut great looking box joints.
  • Reversible design works on either side of the cutter.
Check Stock

WEN 3962T 3.5-Amp 10-Inch Two-Speed Band Saw with Stand and Worklight

  • CNC laser out of 3/16″ thick steel plate, formed on a CNC press brake..
  • Dual Miter Gauge slides, with optional foot swtich and Incra V27 Miter Gauge.
  • Fits the following models Milwaukee 6232-20, 6232-21, 6238-20, 6238-21& BS125.
  • Fits the following models Milwaukee Fuel M18 2729-20, 2729-21, 2729-22 & CBS125.
Check Stock

INCRA MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence

  • Capitalizing on a great idea, the folks at Incra.
  • The sled with T-track and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle.
  • The right-hand portion of the sled, once cut.
  • Table saw that blends incremental angle control and a special 3-panel sled.
  • Precision angle indexing teeth are laser cut in solid steel.
Check Stock

INCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop

  • Engraved stainless steel primary scale for precision accuracy.
  • 41 laser cut V-stops for extreme accuracy at all popular angles.
  • Patented GlideLOCK miter bar with 6 expansion points for quick repeats.
  • 18- to 31-inch telescoping incremental miter fence for handling a variety of stock widths.
  • INCRA Flip Shop Stop-Fence Positioner for optimal mitering accuracy.
Check Stock

Incra Precision T-rules - Metric (150mm)

  • Instead of squinting at that blur of lines along the edge of your old steel rule.
  • Incra has re-invented the steel rule by putting micro-fine holes at every scale position.
  • Using a T-square this guide draws perfectly placed horizontal lines with dead-on accuracy, with guide slots that wrap around any edges.
  • Rule Set that lets you mark precisely where you want.
  • Micro-fine holes at every scale position.
  • Perfectly placed horizontal lines with dead-on accuracy.
  • Helps you draw perfectly placed horizontal lines.
Check Stock

INCRA T-RULE06 6-Inch Precision Marking T-Rule

  • Precise, versatile, and easy-to-use are the words which best describe the Incra 6-Inch Precision Marking T-Rule.
  • Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy.
  • There are micro-fine marking holes and slots at every 1/16-, 1/32.
  • Precise, versatile, and easy-to-use T-Rule.
  • Combination square for marking with perfect, instant accuracy.
  • Micro-fine marking holes and slots at every 1/16-, 1/32-, and 1/64-inch scale position.
  • Locate your sharp pencil or scribe with absolute precision.
Check Stock

POWERTEC 71438 T-Track Clamp Vice | Hold Down Clamps for T-Tracks Accepting 1/4 Inch hex head Bolts – 2 Pack

  • INCLUDES: (2) Screw Vice Hold Down Clamps for T-Tracks.
  • FUNCTION: Designed to fit any standard t-track that accepts 1/4” hex head bolts – these screw type clamps will slide into your t-track and quickly secure your workpiece with a twist of the knob.
  • VERSATILITY: Works seamlessly with an assortment of applications, including router table, drill press, saws and jig assemblies.
  • CLAMP CAPACITY: Able to securely hold 1/4” to 2” thick woodworking stock. Compatible with Kreg, Incra, Peachtree Mini and other ¼” T Track..
  • PREMIUM BUILD: Each hold down clamp features an ergonomic design with a plated steel clamp screw and foot with a soft plastic non marring cap, paired with an anodized aluminum body and round 1-1/2” clamping screw knob.
Check Stock