INCRA MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence

  • Capitalizing on a great idea, the folks at Incra.
  • The sled with T-track and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle.
  • The right-hand portion of the sled, once cut.
  • Table saw that blends incremental angle control and a special 3-panel sled.
  • Precision angle indexing teeth are laser cut in solid steel.
Check Stock

Magswitch 81101302 Vertical Featherboard Pro Table Saw Safety Attachment

  • PROFESSIONAL WOODWORKING EQUIPMENT: Vertical featherboard universally improves cutting results by holding down materials to ensure productivity on a table saw or bandsaw..
  • REVERSIBLE MAGNET TOOL: Reversible magnet for functionality on either side of the workpiece..
  • EXCELLENT GRIP: Vertical Featherboard anchors to table saws for fences to provide downward pressure as it is cut to ensure that thin material does not bend or lift off the table.
  • compressible gaskets provide excellent grip when magnets are engaged..
  • CLAMP CONFIGURATION: Configured to clamp to the center of a steel table saw fence or at any point on the steel tabletop..
Check Stock

Rockler Clamp-It Corner Clamp Jig - Glass-Filled Polycarbonate Woodworking Clamps - Corner Clamps to Hold Panel Parts Together - Right Angle Clamp for Fastening Work - Woodworking Tools

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

Rockler 45 Degree Miter Sled for Table Saw - Miter Saw Sled Ensures Durability & Low-Friction Sliding - Table Saw Accessories Fits Standard 3/8\ x 3/4\ Miter Slot – Fence Accessories

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

THE SMART CUT Aluminum Table Fence 18 ft with Universal Saw Attachment Mounts | For Any Portable Chop or Miter Saw Stand | Compact & Lightweight | Easy Setup Jobsite Table

  • LESS BOARD STRUGGLE: The Smart Cut Aluminum Table Fence universally attaches to any saw or stand (not included) giving you a flush fit to your saw back fence and base. Table sections can be configured left or right of the saw for cutting work pieces of any size. This table eliminates board struggle at the saw and keeps boards on plane for precise, accurate cutting..
  • COMPACT & LIGHTWEIGHT: The aluminum Table Fence is very lightweight, portable, and jobsite tough. Our miter saw accessories are heavy-duty, yet fast and easy to set up and tear down so you can go home at the end of the day. It’s a great addition to your miter saw stand, the table breaks down into (4) 4.5ft sections, it fits easily into your truck bed. Cost, quality, and versatility make this a superior product to other miter saw tables, miter saw fences, and miter saw accessories competitors..
  • SATISFACTION GUARANTEED: Made in the USA and Veteran Owned, we are confident you will love our miter saw products. We are committed to providing the highest level of customer satisfaction. If you are ever unsatisfied, reach out to us directly, and we will do all we can to make it right. Your satisfaction is our #1 priority..
Check Stock

Incra FLIPSHOPSTOP Adjustable Dual, FLIP-Shop Stop Positioner (for the Flip Fence only)

  • The Flip Shop Stop works great with all INCRA Flip Fences.
Check Stock

INCRA Miter Combo Value Pack

  • Dock & Lock the included INCRA Miter Gauge in Seconds.
  • Removable t-slot retaining clips & adjustable miter bar.
  • GlideLOCK Miter Bar - The Miter 1000SE's 6 expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws....
  • Special Edition Telescoping INCRA-LOCK Fence.
Check Stock

BOW Products GuidePRO GP5 Bandsaw Guide - EVA Feathers the Reduce Kickback - Vertical Resaw Featherboard for Band Saw - Woodworking Safety Accessory for Greater Feed Control

  • PROFESSIONAL WOODWORKING EQUIPMENT: Vertical featherboard universally improves cutting results by holding down materials to ensure productivity on a table saw or bandsaw..
  • REVERSIBLE MAGNET TOOL: Reversible magnet for functionality on either side of the workpiece..
  • EXCELLENT GRIP: Vertical Featherboard anchors to table saws for fences to provide downward pressure as it is cut to ensure that thin material does not bend or lift off the table.
  • compressible gaskets provide excellent grip when magnets are engaged..
  • CLAMP CONFIGURATION: Configured to clamp to the center of a steel table saw fence or at any point on the steel tabletop..
Check Stock

INCRA Mast-R-Lift-II Router Lift

  • Exclusive INCRA MagnaLOCK reducing ring system (3/8-Inch, 1-Inch, 1-5/8-Inch, 2-5/8-Inch, 3-5/8-Inch) for instant ring changes and perfect ring fit.
  • Change router bits from the top of the table. Quickly make super precise, 0. 001-Inch height adjustments from above.
  • 9-1/4-Inch x 11-3/4-Inch x 3/8-Inch plate size is compatible with all INCRA Router Tables and fits some other brands.
  • Exclusive ball bearing mechanism for super smooth action and low friction.
  • Patented thread tensioning system eliminates vertical lash in the lift mechanism. Ultra-responsive, direct drive 16TPI lift screw mechanism.
Check Stock

POWERTEC 71134 Right to Left Measure Tape with Adhesive Backing 4

  • INCLUDES: 4' Self Adhesive Right to Left Tape Measure (yellow).
  • FUNCTION: A measuring tape with a permanent adhesive backing that can stick to most work surfaces, and designed replace your old worn out table saw....
  • VERSATILE: Whether replacing your old worn out table saw tape measures or mounted on your workbench top set-ups, rip fences, craft tables, t-tracks or....
  • EASY-TO-USE DESIGN: Simply peel and attach to the desired surface.
  • and once mounted the measurements are read from right to left using a continuous....
  • SPECIFICATIONS: 4 feet long | 5/16" wide | 1/128" thick | Made with precision metal for long term durability.
Check Stock

Dual Deluxe Stackable Featherboards with Riser Blocks Aluminum Miter Lock Bar and T Bolt Hardware for Track or Miter Slot Mounting Ideal for Table Saws Router Tables and Band Saws

  • ...eads out much better than before and creates a nice tight fit into your miter track..
  • This dual featherboard also includes 1½” long ¼” x 20tpi t-bolts. This gives you the option to mount the featherboards into small t-track slots. These t-track slots are most commonly used on router table tops and router table fences. This means you can use the featherboard vertically on a router table fence or horizontally laying flat on a router table or table saw top surface..
  • The dual featherboard comes with all the necessary hardware to get going right out of the box. Each featherboard measures approximately 7¾” tall by 7-1/8” wide which is ideal for most workshop fences and table saw tops. Please keep in mind that some job site table saws and router tables have a short distances from the end of the table to the cutter or blade. The featherboard must be completely inside the track or slot in order for it to properly work..
Check Stock

Magswitch Dual Roller Guide Attachment for Magswitch Workholding System

  • -The Magswitch Dual Roller Guide is the ultimate third hand when you are doing the most difficult and dangerous woodworking projects on a bandsaw or general infeed outfeed support on tables and fences..
  • -SUPPORT: The dual roller guide helps support a tall panel or hold down a long piece of wood and steady your resaw projects..
  • -FEATURES: A dual set of roller bearings provide firm yet smooth glide of wood through a saw blade and micro adjustment for fine tuning to 90 degrees..
  • -EASY SET UP: The dual roller's low profile design allows for fast, strong set up anywhere on a steel table or cast iron fence, even on the smallest table..
  • -INCLUDES: Dual roller guide and all required attachment hardware..
  • Features a dual set of roller bearings for firm yet smooth glide of wood through a blade..
  • Includes micro adjustment for fine tuning to 90 degrees..
  • Ideal for re-sawing on band saws, a second hand to hold raised/long or tall panels against a fence on table saws, general in-feed out-feed support on tables or fences..
  • Built from strong and durable ABS UL94VO material for years of use..
Check Stock

Beslands Backlight Digital Level Box Protractor Angle Finder Gauge Bevel Gage Inclinometer with Aluminium Framework Magnetic Base Saw Electronic Finding

  • Working Temperature: 32°F to 122°F (0℃ to 50℃)..
  • Strong Magnetic Base - Firmly fixed on saw tables, fences, blades and other metal surfaces.
  • reversible display reversed when inverted..
  • Easy carrying - Compact and lightweight, constructed of aluminum alloy and ABS, this magnetic miter gauge is compact and lightweight..
  • Energy Saving - Just one AAA battery (not include) can keep this energy-saving level gauge working for more than 50 hours..
  • Wide Range of Applications - this digital angle gauge can be used for in auto repair, machine manufacturing, table saw or miter saw blade lever measurement, constructional engineering, and for construction, woodworking, machinery, telecommunications, automobile etc..
Check Stock