Categories

Best Independent Chucks

Chuck handtite keyless 1/2-Inch carded

  • For those that prefer traditional keyed drill chucks, these chucks offer precision and nearly unlimited mechanical advantage for tightening and loosening drill bits and tooling. These 1/32" - 5/8" JT33 Taper drill chucks have knurled grips and the chuck key is included..
  • Arbor hole tapers from .80 inches at the opening (bottom of chuck) to .78 inches 1/2" down into the arbor hole. This gives a good fit profile for getting the correct chuck for your drill press.
Check Stock

Dynarex Disposable Underpad, 17 inches X 24 inches, 100 Count

  • FOR MEDICAL AND HOMECARE USE: The Dynarex Underpads are disposable bed pads for use during medical procedures and care for adult incontinence. These waterproof bed pads, sometimes called chux or chucks, protect sheets, mattresses, and furniture.
  • HIGHLY ABSORBENT AND PREVENTS LEAKAGE: Our disposable bed pads for incontinence are filled with highly absorbent, soft fill. These underpads are sealed on four sides with polymer to provide ultimate absorption and prevent accidental leaks.
  • NON-SKID AND WATERPROOF: The waterproof construction and non-skid blue backing of these chucks pads disposable assure that the pad stays in place and its underside stays dry. These are ideal bed pads disposable for a wide range of applications.
  • MULTIPLE APPLICATIONS: Dynarex Underpads or chucks pads are suitable not only for homecare and medical operations but also for your pets. Our disposable chucks pads for adults and pets secure for you a clean and protected floor or furniture.
  • IDEAL PACKAGING: Each box contains 100 disposable incontinence bed pads, 17” x 24” (22g), for convenient hospital, clinic, and homecare supply. Dynarex provides Best in Class alternative to other leading brands.
Check Stock

GODESON Air Chuck Locking Air Chuck use for Tire Inflator Nozzles Pack of Clip-on and Twist-on Chucks Pack of 2pcs

  • 1. HEAVY DUTY BRASS CONSTRUCTION of tire chucks with lock on make the tire air chucks durable and Reliable..
  • 2. INTERCHANGEBALE AIR CHUCKS- including Clip-on chuck and Twist-on chuck(thread on) in 1 package. You just choose it for different using. Clip- on....
  • 3. SMART DESIGN with Large Bore of tire air chuck, Open flow through for heavy duty air chuck, while close flow through for clip-on chuck.
  • 4. UNIVERSAL CONNECT TYPE ,1/4-Inch Female NPT, 3/4-Inch Hex Air Chucks, Fits Standard 1/4" NPT Fittings.
  • Quick connect tire inflator chuck, Designed to use with Inflator and pressure gauge. LIFETIME 100% Satisfaction....
Check Stock

Wood Lathe Drill Chuck Fits - Jet 1440Vs Wood Lathe - 3/4 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Jet 1440Vs Wood Lathe.
Check Stock

Metal Lathe Drill Chuck Fits - Grizzly G8688 Metal Lathe - 1/2 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Grizzly G8688 Metal Lathe.
Check Stock

SUNJOYCO Drill Chuck for Impact Driver, 1/4\ Hex Shank Power Drill Chuck Adapter Drill Converter Adapter (0.3-6.5mm,0.3-6.5mm, 2pcs)

  • SPECIFICATION: 2 pieces 3 jaw drill chucks with 1/4" hex shank (0.3-6.5mm,0.3-6.5mm).
  • QUICK CHANGE DRILL CHUCKS: The drill chucks converter could easily concert from fastening to drilling with a 1/4-inch hex shank, allowing you to quickly change tools with one hand..
  • BENEFITS: SUNJOYCO drill chucks for impact drivers eliminate the need for carrying two separate drills during lighter drilling jobs, and allow the use of straight shank and standard drill bits. These handy accessories are easily stored in any toolbox or tool bag..
  • APPLICATIONS: The SUNJOYCO power drill chuck is ideal for starting screw holes in hard-to-reach spaces, and good for light-duty accessories including drill bits, sanding drums, polishing wheels, wire & bristle brushes, and cut-off wheels..
  • WARRANTY: We provide a 2-year warranty policy for these diamond grinding wheels. Buy with confidence. If you have any concerns or questions about our cement grinding wheel, please feel free to contact us..
Check Stock

HQRP On-Off Toggle Switch compatible with Delta 489105-00 11-900 11-950 11-980 11-985 11-990 14-040 17-900 DP400 DP300L 17-950L Drill Press, 34-670 36-600 36-977 36-978 36-980 36-981 TS200LS Table Saw

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Delta Model 11-990 Type 2.
Check Stock

Baizongyang Universal Adjustable Double-ended Wrench Multifunctional Bathroom Wrench for Disassembly & Assembly Valves/Faucets/Connecting Pipes/Shower Heads

  • 【Three Size Chucks】The tool set includes three different sizes of chucks, 3.5cm, 4.5cm hexagonal chucks, and multi-functional round chucks. Three sizes of chuck can be installed on the end of the basin wrench, which can be used for different types of sink fittings..
  • 【Ergonomic】The wrench ergonomic short handle design makes you feel comfortable while using it, and the handle has a perfectly sized grip, allowing your hand to hold tightly without slipping, and it is also convenient to use in tight spaces..
  • 【Large Opening Design】The tooth shape and canine tooth design are more suitable for the shape of the sink wrench, with built-in spring, the opening size can be adjusted arbitrarily. The opening range can be adjusted between 56 - 80mm, suitable for a variety of environments requiring wrench operation..
  • 【Durable Material】The bathroom wrench is made of aluminum alloy and ABS. Offers high hardness, impact resistance and durability. With higher precision, higher flexibility and higher efficiency. Comes with a storage box for easy storage and long-term use..
Check Stock

3PCS 1/4 Inch Hex Shank Keyless Drill Chuck, Quick Change Adapter Converter Impact Drills Bits, Electric Tool Accessories (0.3-3.6mm/0.3-6.5mm)

  • [Package Included]: 3PCS 1/4inch hex shank keyless drill chuck, include 1X 0.3mm-3.6mm drill chuck, and 2X 0.3mm*6.5mm dill chucks. Easy to use and install, fast, convenient and safe, it is an essential power tool accessory in daily life..
  • [Quik Change Adapter Converter]: Keyless design allows one to easily and quickly swap bits and wires, easy to load and unload. Can quickly switch tasks and maintain work progress, which simplified all your tasks. Hexadecimal drive power tools are allowed to be applied with most drill bits..
  • [Strict Quality Control]: Our mini adaptor drill chuck manufactured under strict quality control. Made of high qualitity metal meterial. Durable, well-made, they are good enough for most jobs. Small size and light weight, will not bring additional burden to the operation.
  • [Keyless Drill Chucks Design]: Keyless drill chucks can easily turn a cordless electric screwdriver into a drill or grinder.
  • Can be easily to adjusted to quickly switch tasks and maintain work progress. They are essential power tool accessories..
  • [Wide usage]: These drill chucks' specifications are 0.3mm-3.6mm/0.3mm-6.5mm, which suitable for most drills and cordless power screwdrivers. For repairers, model makers, DIY enthusiasts,It is an ideal tool to use in garag....
Check Stock

GODESON Air Chuck, Screw on Tire Inflator Nozzle for Tire Inflator Gauge Compressor Accessories, Twist-on Chucks(Pack 2pcs)

  • 1. HEAVY DUTY BRASS CONSTRUCTION of tire chucks with locking on make the tire air chucks durable and Reliable..
  • 2. INTER SCREW TIRE CHUCK - including 2 packs Twist-on chuck(thread on) in 1 package. Twist-on chuck can tightly hold the tire valve of bicycles,motorcycles,cars, buses and trucks..
  • 3.TIRE INFLATOR CHUCKS with thread can make it bite on the tire valve stem tightly when inflating.
  • 4.UNIVERSAL CONNECT TYPE ,1/4-Inch Female NPT, 3/4-Inch Hex, Fits Standard 1/4" NPT Fittings.
  • Quick connect tire inflator chuck, Designed to use with Inflator and pressure gauge. LIFETIME 100% Satisfaction Guarantee..
Check Stock

CAT40 ER16 Collet Chucks 5 Pcs w Projection 2.76\-6\ Balanced G2.5 @20,000 RPM

  • Package includes: 2PC CAT40 ER16 collet chucks with Projection 2.76".
  • 2PC CAT40 ER16 collet chucks with Projection 4.
Check Stock

CAT40 ER32 Collet Chucks 5 Pcs w Projection 2.76\-4\-6\ Balanced G2.5 @20,000RPM

  • Package includes: 2PC CAT40 ER32 collet chucks with Projection 2.76".
  • 2PC CAT40 ER32 collet chucks with Projection 4.
Check Stock

CAT40 ER40 Collet Chucks 4 Pcs w Projection 3.15\-4\-6\ Balanced G2.5 @20,000RPM

  • Package includes: 1PC CAT40 ER40 collet chucks with Projection 3.15".
  • 2PC CAT40 ER40 collet chucks with Projection 4.
Check Stock