Best Indexable Boring Bars

ARES 46000-13.3-Inch to 18.5-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel

• SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 13.3 inches to 18.5 inches with a 14-position locking head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's knurled bands will help ensure a firm grip for the smoothest possible use..
• QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
• COMMON APPLICATIONS: Indexable Pry Bars are the perfect tools for removing engine and axle drive seals as well as a number of other applications. These 14-position pry bars give you superior leverage in confined or hard to reach areas, and extendable handle combined and ergonomic grip will give you the edge you need to get the job done..
• RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Extendable Indexing Pry Bar, simply contact customer service for troubleshooting help, parts, replacement, or refund..

Accusize Industrial Tools 8 Pc 3/4 Round Shank Indexable Boring Bar Set with Tcmt Carbide Inserts 90 Degree 2627-9108

• 3/4", .75in Round Shank, 90 Degree, Indexable Boring Bar Set, allowing the operator to set positive or negative rake.
• Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert.
• It is not necessary to remove tool from chuck or tool post.
• Positive Rake 90Degree Lead, Uses 0.050" key, C6 grade: carbide for steel and alloy steel.
• 1/4" I.C. carbide inserts fit all bars, Radius = 0.015", Key = T8, Shank: 3/4", Piece per set: 8.

ARES 46003-21-Inch to 33-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel

• SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 21 inches to 33 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's knurled bands will help ensure a firm grip for the smoothest possible use..
• QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
• COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
• RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Extendable Indexing Pry Bar, simply contact customer service for troubles....

ARES 46004-29-Inch to 48-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel

• SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 29 inches to 48 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's ergonomic TPR grip will help prevent hand fatigue and ensure a firm grip for the smoothest possible use..
• QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
• COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
• RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed ....

Accusize Industrial Tools 3/8 1/2 5/8 & 3/4 inch 31 Pc Right Hand Stucr Indexable Boring Bar Set Including 20 Pc Tcmt Inserts P252-S412

• Small hole capacity: minimum of .430''. TCMT inserts.
• Negative 3 degree end cutting edge for 7 degree positive triangle Clearance.
• Bar is made of heat treated, precision ground alloy steel.
• 4pcs indexable boring bars(STUCR). 1pc each of 3/8", 1/2", 5/8" & 3/4".
• 10pcs TiN coated TCMT 21.5 inserts. 10pcs TiN coated TCMT 32.5 inserts. 4pcs torx screws. 2pcs torx wrench. 1pc fitted case.

Accusize Industrial Tools 3/4\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0034

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

• Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
• Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
• The cemented carbide material makes the turning tool durable and adaptable.
• Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
• Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
• cutting angle is 95 degree, cutting direction is right hand.
• Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
• Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
• Tight impact bolts, simple structure, often applied for small hole processing.
• Note: due to the slight color change of manu....

ASZLBYM 21PCS 1/2\/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G

• ♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches..
• ♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
• ♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc..
• ♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..

ASZLBYM 3/4\ Right Cutting Lathe Indexable Turning Tool Holder MWLNR2020K08 with WNMG432 Carbide Turning Insert

• Top quality indexable lathe bits with replaceable tips. Inserts can be rotated to a new cutting edge without changing the position of the tool holder!.
• Set includes 5ps precision 1/4" shank tool bits with C6 carbide inserts, 5ps spare insert screws,2ps wrenches , 1ps wood case and 1ps blade..
• 2 Pcs. style "A" 0° for turning, facing, boring, and chamfering (AR & AL).
• 2 Pcs. style "B" 15° for turning, facing, boring, and for lead angles (BR & BL).
• 1 Pc style "E" 30° for turning, facing, boring, chamfering, threading, and V-grooving.

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

• Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
• Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
• The cemented carbide material makes the turning tool durable and adaptable.
• Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
• Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
• cutting angle is 95 degree, cutting direction is right hand.
• Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
• Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
• Tight impact bolts, simple structure, often applied for small hole processing.
• Note: due to the slight color change of manu....

OSCARBIDE 5/8''by 8''Indexable Boring Bar Right-Hand Sclcr Boring Bar with CCMT09T304(CCMT32.5),1 Piece

• Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
• Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
• Indexable Boring Bar Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
• CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
• Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.

ABN Adjustable Pry Bar Set Heavy Duty 11-Point Indexing Pry Bar Set Automotive Pry Bar 3pc Kit – 8in, 12in, 16in

• ALIGN & REPOSITION AUTOMOTIVE EQUIPMENT: Use the ABN | Pry Tool Indexable Pry Bar Kit 3-Piece Set to remove engine and axle drive seals, pull diesel injectors, position engines, align steel components, and reposition equipment.
• Each automotive pry bar tool has a full 180-degree indexable head swing that you can set to 1 of 11 different locking positions for the right angle and leverage to access hard-to-reach spots.
• Simply push down button on head and turn claw to angle.
• BUILT TO LAST: Constructed with a strong locking device on index and full chrome-vanadium steel (CR-V) body with a manganese phosphate finish for maximum strength and longevity that resists rust and corrosion.
• Adjustable prybar tool set meets or exceeds ANSI specifications.
• GRIP COMFORTABLY: Ergonomic thermoplastic rubber (TPR) handle on each auto pry bar allows for maximum grip and leverage with less user fatigue and more productivity.
• EASY STORAGE: Heavy-duty 17.5” x 2.4” x 8.2” inch (44.5cm x 6.1cm x 20.8cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization.
• PACKAGE CONTENTS: Pry bars heavy duty flat bar tool kit includes (3) adjustable and indexable angle pry bars (8”, 12”, 16” inch) and (1) ca....

Sandvik Coromant 880-D1200L20-03 Corodrill 880 Indexable Insert Drill, 880.L-03 (01) Tool Style Code, 0.787\ Shank, 20 mm Shank Diameter (Pack of 1)

• INDEXABLE DRILL: Versatile, carbide insert drilling tool and inserts for excellent tool life and holemaking performance.
• Patented STEP TECHNOLOGY to deliver excellent cutting force balance and indexable drilling productivity.
• INSERT SIZE & POCKET POSITIONING: Size 880-01 insert size, Central and Periphery drilling inserts.
• DRILL SHANK AND TYPE: Cylindrical with flat shank, coolant through the drill, metric design.
• With CoroDrill 880, you can do more than just drilling a hole. The tool can also be used for helical interpolation, boring, plunging, and turning..