Categories

Best Indexable Milling Cutter Bar

45-SD-C16-D12-110L 45 Degree Chamfer indexable Mill Cutter Arbor SDMB26152 Carbide Inserts

  • if insert on the cutter: smallest diameter 12mm, biggest diameter: 23.15mm.
  • 45 degree chamfer indexable mill cutter arbor SDMB26152 carbide inserts.
  • Package: 1pcs of milling cutter arbor, 1pcs of torx key, 1pcs of packing box (not include carbide insert).
Check Stock

45-SD-C12-D3-100L 45 Degree Chamfer indexable Mill Cutter Arbor SDMB26152 Carbide Inserts

  • if insert on the cutter: smallest diameter 3mm, biggest diameter: 12mm.
  • 45 degree chamfer indexable mill cutter arbor SDMB26152 carbide inserts.
  • https://www.amazon.com/dp/B07Z2FS4JD?ref=myi_title_dp.
  • Package: 1pcs of milling cutter arbor, 1pcs of torx key, 1pcs of packing box (not include carbide insert).
Check Stock

Accusize Industrial Tools Cat40 1'' End Mill Holder with 3'' Indexable Face Milling Cutter, 7104-2508

  • CAT40 1'' Diameter Caterpillar V-Flange Shell End Mill Holder, #6780-7104.
  • All ''V'' Flange Tooling is interchangeable with brown & sharp, Burgmaster, Carboloy, Cincinnati Milacron, De Vlieg, Erickson, Excello, Moog, Pratt & Whitney, Universal, Valenite, White Sund Strand and other machining centers.
  • 3'' Indexable Face Milling Cutter 90°, Positive Rake with TPG322, #2508-0018.
Check Stock

WEN CH4704 18.5-Inch Indexable Wood Turning Chisel with Four Carbide Cutter Tips

  • Always sharp: indexable 6-inch gouge bar allows for easy tip installation and changes.
  • Includes four different shapes of carbide cutter tips: round, square, diamond, and arc.
  • Form-fitted 12-inch wooden handle crafted from durable African coralwood.
  • Easily replace a dull chisel tip with a set of WEN CH016R Indexable Cutters.
  • The perfect woodworking accessory for the WEN Wood Lathe Series.
Check Stock

KXA High Hardness Metal 22Mm Milling Arbor Gear Milling Cutter Tool Holder Taper Ms3

  • Is a lathe, milling machine, drilling machine common accessories..
  • Can be installed horizontal cutter bar, saw blade cutter, saw milling cutter, piece cutter..
  • High precision, high hardness, durability, is not deformed..
Check Stock

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

  • Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
  • Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
  • When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
  • Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
  • Used for slotting and peripheral milling.
Check Stock

BAP400R-50-22-4T Milling Cutter NT40-FMB22 Collet Chuck Holder Indexable End Mill APMT1604 Carbide Inserts for Milling Machines (#1)

  • Adopted New Coating Technology: New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time.
  • BAP400R Right-angle Milling Cutter: BAP400R right-angle milling cutter reduces blade wear and saves processing costs.
  • Fast Milling: Fast milling, screw off-position fastening designed, make the Milling Inserts and cutter fit tightly.
  • High Working Performance: This is a high precision Milling Cutter , strong rigidity, good processing effect.
  • High Hardness: The milling cutter is made of high quality material, high hardness with good impact resistance.
Check Stock

Milling Cutter, Milling Tool, ZDZCYS22DL 10Pcs 3.175mm Handle Milling Tool Cemented Carbide 2-Flute Straight Milling Cutter

  • 【Durable】10pcs cemented carbide milling cutter with high hardness, durable in use.
  • 【Material】The milling cutter is made of high-quality cemented carbide materials with long service life.
  • 【Features】The milling cutter has the characteristics of light weight, small size, easy to use and easy to carry.
  • 【Application】2-blade milling cutter is suitable for processing wood, MDF, acrylic, PVC, EVA, foam, plywood, etc.
  • 【Characteristic】Milling tool has a smooth surface, no burrs, sharp edges, milling, holes, and cutting edges.
Check Stock

Blossoms & Steel (Seaside Pointe Book 1)

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

Upgraded Carbide Tipped Woodturning Tools Set, 6 IN 1 Lathe Rougher/Finisher/Dovetail/Swan Neck Hollower Wood Turning Tools, with Interchangeable Aluminum Alloy Grip Extension Handle and Wrench

  • Material:Tool bar：CNC machined 304 stainless steel,increase the stability and shock resistance；Handle：Ergonomics design makes it more comfortable while doing turning job；Carbide cutter：Tungsten carbide of high quality.
  • Indexable Replacement carbide insert design:matched with Round Carbide Insert (12×2.5mm-30°),many usable sides give you fresh edge for maximum cutter lif.
  • Handle：solid wood material，Ergonomics design makes it more comfortable while doing turning job.
  • Dimension: Tool Bar 8.27"(210mm) ，Head 2.36"(60mm)， Overall length 19.69"(500mm).
  • Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY.
Check Stock

Milling Cutter, Dovetail Groove Carbide Cemented Straight Shank 6 Flute Dovetail Cutter End Mill Slot Milling Cutter

  • High quality: The milling cutter is made of cemented carbide with high hardness and good wear resistance..
  • Unique design: The effective cutting edge of the milling cutter is 6, and the compact and practical design makes its work more stable..
  • No burr: The main body of the milling cutter is integrally formed, the surface is smooth and burr-free, and the manufacturing size is accurate..
  • Easy to use: the installation of the milling cutter is very convenient and easy..
Check Stock

GBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock