Best Indexable Slotting Boring Bars

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

• Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
• Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
• When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
• Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
• Used for slotting and peripheral milling.

Spec Ops Tools 11\ Molding Pry Bar Nail Puller Cats Paw, High-Carbon Steel, 3% Donated to Veterans,

• SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 21 inches to 33 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's knurled bands will help ensure a firm grip for the smoothest possible use..
• QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
• COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
• RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Extendable Indexing Pry Bar, simply contact customer service for troubles....

ARES 46000-13.3-Inch to 18.5-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel

• SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 13.3 inches to 18.5 inches with a 14-position locking head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's knurled bands will help ensure a firm grip for the smoothest possible use..
• QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
• COMMON APPLICATIONS: Indexable Pry Bars are the perfect tools for removing engine and axle drive seals as well as a number of other applications. These 14-position pry bars give you superior leverage in confined or hard to reach areas, and extendable handle combined and ergonomic grip will give you the edge you need to get the job done..
• RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Extendable Indexing Pry Bar, simply contact customer service for troubleshooting help, parts, replacement, or refund..

Accusize Industrial Tools 8 Pc 3/4 Round Shank Indexable Boring Bar Set with Tcmt Carbide Inserts 90 Degree 2627-9108

• 3/4", .75in Round Shank, 90 Degree, Indexable Boring Bar Set, allowing the operator to set positive or negative rake.
• Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert.
• It is not necessary to remove tool from chuck or tool post.
• Positive Rake 90Degree Lead, Uses 0.050" key, C6 grade: carbide for steel and alloy steel.
• 1/4" I.C. carbide inserts fit all bars, Radius = 0.015", Key = T8, Shank: 3/4", Piece per set: 8.

ARES 46003-21-Inch to 33-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel

• SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 21 inches to 33 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's knurled bands will help ensure a firm grip for the smoothest possible use..
• QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
• COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
• RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Extendable Indexing Pry Bar, simply contact customer service for troubles....

ARES 46004-29-Inch to 48-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel

• SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 29 inches to 48 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's ergonomic TPR grip will help prevent hand fatigue and ensure a firm grip for the smoothest possible use..
• QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
• COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
• RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed ....

Accusize Industrial Tools 3/8 1/2 5/8 & 3/4 inch 31 Pc Right Hand Stucr Indexable Boring Bar Set Including 20 Pc Tcmt Inserts P252-S412

• Small hole capacity: minimum of .430''. TCMT inserts.
• Negative 3 degree end cutting edge for 7 degree positive triangle Clearance.
• Bar is made of heat treated, precision ground alloy steel.
• 4pcs indexable boring bars(STUCR). 1pc each of 3/8", 1/2", 5/8" & 3/4".
• 10pcs TiN coated TCMT 21.5 inserts. 10pcs TiN coated TCMT 32.5 inserts. 4pcs torx screws. 2pcs torx wrench. 1pc fitted case.

Accusize Industrial Tools 3/4\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0034

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

• Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
• Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
• The cemented carbide material makes the turning tool durable and adaptable.
• Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
• Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
• cutting angle is 95 degree, cutting direction is right hand.
• Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
• Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
• Tight impact bolts, simple structure, often applied for small hole processing.
• Note: due to the slight color change of manu....

GBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)

• ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
• ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
• ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
• ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
• ☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.

ASZLBYM 21PCS 1/2\/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G

• ♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches..
• ♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
• ♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc..
• ♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..

GBJ 90 ° Indexable End Mill Holder BAP400R C24-25-200 APMT1604PDER Carbide Inserts Machining Steel,Iron Square Shoulder Face milling Slotting Milling Arbor (400R C25-25-150-2T+APMT1604PDER-DP Gold)

• ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
• ☞About the 400R C24-25-200 -2T (0.98" Shank) Milling holder: 40Cr MnTi ,0.98" shank diameter , 0.98" cutting diameter, 7.87" overall length. Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
• ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
• ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
• ☞Package: 1x 400R C24-25-200-2T Indexable End Mill with wrench + 10pcs APMT1604PDER ZM1135 colorful hardened carbide inserts.

ASZLBYM 3/4\ Right Cutting Lathe Indexable Turning Tool Holder MWLNR2020K08 with WNMG432 Carbide Turning Insert

• Top quality indexable lathe bits with replaceable tips. Inserts can be rotated to a new cutting edge without changing the position of the tool holder!.
• Set includes 5ps precision 1/4" shank tool bits with C6 carbide inserts, 5ps spare insert screws,2ps wrenches , 1ps wood case and 1ps blade..
• 2 Pcs. style "A" 0° for turning, facing, boring, and chamfering (AR & AL).
• 2 Pcs. style "B" 15° for turning, facing, boring, and for lead angles (BR & BL).
• 1 Pc style "E" 30° for turning, facing, boring, chamfering, threading, and V-grooving.