Categories

Best Indexable Tooling Systems

ARES 70184-3-Piece Indexable Pry Bar Set - 11-Position Adjustable Angle Pry Bars - High Strength Chrome Vanadium Steel - Includes 8-Inch, 12-Inch and 16-Inch Indexable Pry Bars

  • SPECIFICATIONS: This set includes 8-inch, 12-inch and 16-inch pry bars and a high quality storage case. The bars feature adjustable 11-position locking heads and are indexable to 180 degrees to give you improved access to hard to reach places. The handle features an ergonomic TPR grip that helps to prevent hand fatigue during prolonged use and provides a superior gripping surface for improved leverage..
  • QUALITY: These indexable pry bars are constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. They also have a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
  • WHY YOU NEED THEM: Indexable Pry Bars are the perfect tools for removing engine and axle drive seals as well as a number of other applications. These 11-position indexable pry bars give you superior leverage in confined or hard to reach areas, and the long handles combined with the ergonomic grip will give you the edge you need to get the job done!.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Indexable Pry Bar Set, simply contact customer s....
Check Stock

ASICS Women's Gt-1000 5 Running Shoe, Black/Onyx/Black, 6 M US

  • Impact Guidance System (I.G.S) (Running) : ASICS design philosophy that employs linked componentry to enhance the foot's natural gait from heel strike to toe-off..
  • Rearfoot and Forefoot GEL Cushioning Systems: Attenuates shock during impact and toe-off phases, and allows movement on multiple planes as the foot transitions through the gait cycle..
  • SpEVA Midsole: Material Improves bounce-back characteristics and decreases midsole breakdown..
  • Guidance Line:  Vertical flex groove decouples the tooling along the line of progression for enhanced gait efficiency..
  • Guidance Line Midsole Technology: Vertical flex groove decouples the tooling along the line of progression for enhanced gait efficiency..
  • The black specks on the medial side of the midsole are intentional and identifies a section of the shoe in which a technological feature exists. These black marks are not a defect..
Check Stock

Savannah - 7586 Carbide Turning Tool Large Size (3 Piece Set - All 3 Turning Tools) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles, Three Tool Set

  • ●PACKAGE : you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 11 pieces CNMG 431,11 pieces WNMG 431, 11 pieces TNMG 331 indexable carbide turning insert blades, cufficient quantity and easy to replace..
  • ●MATERIAL : lathe indexable carbide turning tool holders are made of quality 40Cr steel.
  • The 40Cr steel material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use TIN coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability..
  • ●SIZE : diameter of the holder is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • each tool holder has a black oxidized smooth surface..
  • ●EASY TO STORE : 33pieces indexable carbide turning inserts into 3 plastic boxes , each turning tool holder is placed in a plastic box, and Each box has a clear mark for easy identification of the product model, safe and easy to store..
  • ●MAYBE YOU NEED : If you need 5/8" left hand turning holder set, you can search for ASIN : B07B8XNH98 to buy it..
Check Stock

5 PC 3/8'' Indexable Carbide Insert Lathe Turning Tool Bit + 10 Pc Tips COMBO

  • 5 PC 3/8'' indexable carbide insert turning tool bit set + 10 PC carbide tip combo.
  • 5 PC 3/8'' indexable carbide insert turning tool bit set specs:Shank Diameter: 3/8".
  • AL/AR Style 0 degree Lead, BL/BR Style 15 degree Lead, E Style 30 degree Lead.
  • 10 PC 3/8'' Inserts TCMT 2151 specs:Case overall dimension: 1-1/2''L x 3-3/4''W x 1/2''H.
  • Quantity: 1 set (5 pcs 3/8'' indexable carbide turn tool bit set + 10 pc carbide tips).
Check Stock

Aremnry 3PC Indexing Pry Bar Set - 15-Position Adjustable Angle Pry Bars - High Strength Chrome Vanadium Steel - 8in, 12in, 16in Indexable Pry Bars

  • 【Specifications】 This adjustable pry bar set includes 8-inch, 12-inch and 16-inch pry bars. The bars feature adjustable 15-position locking heads and are indexable to 248 degrees to give you improved access to hard to reach places..
  • 【Grip Comfortably】 Ergonomic thermoplastic rubber (TPR) handle on each auto pry bar allows for maximum grip and leverage with less user fatigue and more productivity..
  • 【High Quality】 These indexable pry bars are constructed of high strength Chrome Vanadium Steel (CR-V) to ensure a lifetime of heavy duty use. They also have a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
  • 【APPLICATIONS】 These indexable pry bars give you superior leverage in confined or hard to reach areas, and the long handles combined with the ergonomic grip will give you the edge you need to get the job done..
  • 【Easy Storage】 Heavy-duty plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization..
Check Stock

ASZLBYM 21PCS 1/2\/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G

  • ♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches..
  • ♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • ♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc..
  • ♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
Check Stock

Spec Ops Tools 11\ Molding Pry Bar Nail Puller Cats Paw, High-Carbon Steel, 3% Donated to Veterans,

  • SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 21 inches to 33 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's knurled bands will help ensure a firm grip for the smoothest possible use..
  • QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
  • COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Extendable Indexing Pry Bar, simply contact customer service for troubles....
Check Stock

ARES 46000-13.3-Inch to 18.5-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel

  • SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 13.3 inches to 18.5 inches with a 14-position locking head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's knurled bands will help ensure a firm grip for the smoothest possible use..
  • QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
  • COMMON APPLICATIONS: Indexable Pry Bars are the perfect tools for removing engine and axle drive seals as well as a number of other applications. These 14-position pry bars give you superior leverage in confined or hard to reach areas, and extendable handle combined and ergonomic grip will give you the edge you need to get the job done..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Extendable Indexing Pry Bar, simply contact customer service for troubleshooting help, parts, replacement, or refund..
Check Stock

ARES 46003-21-Inch to 33-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel

  • SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 21 inches to 33 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's knurled bands will help ensure a firm grip for the smoothest possible use..
  • QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
  • COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Extendable Indexing Pry Bar, simply contact customer service for troubles....
Check Stock

ARES 46004-29-Inch to 48-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel

  • SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 29 inches to 48 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's ergonomic TPR grip will help prevent hand fatigue and ensure a firm grip for the smoothest possible use..
  • QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
  • COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed ....
Check Stock

ASICS Men's GEL-451 Running Shoes, 7, NEON Lime/White

  • Rearfoot GEL technology cushioning system - Attenuates shock during impact phase and allows for a smooth transition to midstance..
  • Guidance Line Midsole Technology - Vertical flex groove decouples the tooling along the line of progression for enhanced gait efficiency..
  • BOA Fit System - BOA systems contain three integral components: an instant release dial for precision fit.
  • and low friction guides to ensure a smooth closure..
Check Stock

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
Check Stock

WEN CH4704 18.5-Inch Indexable Wood Turning Chisel with Four Carbide Cutter Tips

  • Always sharp: indexable 6-inch gouge bar allows for easy tip installation and changes.
  • Includes four different shapes of carbide cutter tips: round, square, diamond, and arc.
  • Form-fitted 12-inch wooden handle crafted from durable African coralwood.
  • Easily replace a dull chisel tip with a set of WEN CH016R Indexable Cutters.
  • The perfect woodworking accessory for the WEN Wood Lathe Series.
Check Stock