Categories

Best Indoor Cable Railing Kits

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR66,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(4.5mm), OD-5/8"(16mm), thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32"cable on level applications, ONLY fit 1/8" cable on 30°angle. Please check the image to find the compatibility table for further models. Cable railing kits Muzata CR26 is recommended to work with CR66 to let your cable railing system look neater.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you get a fully customized project, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sl....
Check Stock

Walrkaur 304 Stainless Steel Deck Railing Brackets for 2'' x4''(Actual 1.55'' x3.5'') Railing Wood Post (16pcs)

  • Patent Design - With a flexible separation design, Muzata angle protector sleeves fit 1/8" wire rope and are easy to install on stair railing and ramps at 10 30 35 degrees. If you need angles larger than 35°, pls choose CR69(45°Angle Protector Sleeve). Note: these cable railing kits are ONLY for WOOD posts. Package includes: 40packs angle sleeves, 40packs adhesive sleeves, 80pcs adhesives, 1pc drill bit(9/32").
  • Protective and Decorative Function - These stainless steel protector sleeves help protecting wood post and stainless steel cable from friction wear. Adding these protective sleeves will make it easier to stretch cable through posts and also beautify the rough edges of the drilled holes to create a clean look. Note: It works for wood posts only, not for metal posts.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.【Muzata's Guarantee】: Please feel free to contact us if you find any quality problems after installation. We'll provide you with the most attentive after-sales service.
  • Pre-Designed System - To help you construct a cable railing system, we pre....
Check Stock

Muzata 1Pc Upgraded Custom Socket Wrench for 1/8' Invisible Cable Railing Kit Fit Muzata CV1 Hidden Turnbuckle Tensioner on Wood Metal Posts for Deck Stair CT16, CT1

  • IMPORTANT to know before purchases – Muzata CT16 is ONLY compatible with 1/8” cable railing kits Muzata CR26,CR36,CR37,CR38,CR52,CB05,CB07,CB24,CB31,CB40. For 3/16” cable railing kits, please search Muzata CT17 to use with. Plus, the socket wrench may already be included in the cable railing kit packages, please check your order carefully in case of repeat purchases.
  • Patent Design – This custom socket wrench is an essential tool to work with Muzata invisible cable railing kits that are designed with a flattened tail. With patent design of the socket wrench, you can clamp the flattened tail of tensioners and hide the ugly swaged end inside the post. Meanwhile, you can get enough tension to pass the 4” sphere test to meet code compliance. Package includes: 1pc socket wrench.
  • Material – Made of spring steel, the socket wrench is durable for long-term use under correct operation. Please check pic 4 and video to find instructions in case of damage caused by the wrong operation..
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you construct a hidden neat-look wood system, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sleeve CR13, drill guide ....
Check Stock

Muzata 4Pack Level drilled Cable Railing Post 36 x2 x2 Post Body 35 Fixed top Level Line Post Top Mount Brushed Stainless Steel Wood Concrete Level Deck PS02 LH4S

  • Key feature - This square cable railing post (brushed finish) is designed for 36" residential cable railing projects. It is pre-drilled with 10 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. Pls search Muzata DG01 to find matched cable railing gate.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PD01 PD02 PW01 to find the aluminum cable railing posts.
  • Code Compliance - This structural square post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS12 to find slice or rectangular stabilizer posts to get a broader view. It is important to consult local building offices about the rules since there might be....
Check Stock

Muzata 330Feet 1/8inch Stainless Steel Wire Rope Aircraft Cable Railing Decking 7x7 Strand Indoor Outdoor DIY Balustrade with 1pc Cable Cutter WR01,WP1

  • This is Non-Turnbuckle System according to principle of screwing L&R handed thread lag at the same direction and the both lags will go into the opposite direction，So the cable will be tightened by the R&L handed thread lags without torsion force and damage.
  • The length of cable spanning capability of this kit is the same as other common cable railing kits；.
  • This cable railing hardware was made of Marin Grade T316-Stainless Steel, and it can be used indoor and outdoor.
  • The total length of this lag is 4.1 inch，Length of thread bar is 2 inch，this cable railing lag fit standard 1/8 inch（3.2mm）steel wire rope；and the length of cable is 1 inch shorter than the distance of inner edges of posts which on both sides usually to be recommended；.
  • This Right&Left hand thread screw lags are connected with cable need by using hydraulic crimper(This item not include)，and this item go with a correct size dill bit and a special wrench.
  • When you really understand this non-turnbuckle system，you will find the swage turnbuckles and other trivial parts are not necessary in cable railing system，And this system will be more durable and beautiful..
Check Stock

Muzata 10Pack Invisible Cable Railing Kit 1/8 Swageless Terminal Flat Head Hidden for 2 x2 Metal Post Deck Stairs NiceView System CB06,CV2 CL1

  • ...05. 30 degree angled washer Muzata CR60 is needed for stair installation. Package includes: 10 packs terminals,1pc allen wrench.
  • No Need Crimper and Reusable - With the patent swageless design, you don’t need a Hydraulic Crimper to swage, which saves your time and efforts, also expenses of the crimper. Most cable railing hardware is irreparable after swaging with wire rope if you get a wrong measurement or need adjustment. However, this lag screw can be reused by unscrewing the jackscrews and adjusting the cable length whenever you want to remeasure or rebuild.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System - We pre-designed a NiceView cable railing system to help you get a fully customized project, including cable railing kits CB05 CB06 CB17, protector sleeves CR72 CR66, angled washer CR60, stainless steel cable WR02, cable cutter CR12, socket wrench CT16,posts PS01 PS02, handrails HT10, handrail connectors (HA01 HA02 HA23 HA24. (Please note that package ONLY contains contents as stated in bullet point 1, other stuff mentioned is NOT included).
Check Stock

Muzata 20Pack 10 30 35 Degree Angle Adjustable Protector Sleeve for Wood Post Stair Railing for 1/8\ Wire Rope Cable Railing T316 Stainless Steel CR68,CP1

  • Patent Design - With a flexible separation design, Muzata angle protector sleeves fit 1/8" wire rope and are easy to install on stair railing and ramps at 10 30 35 degrees. If you need angles larger than 35°, pls choose CR69(45°Angle Protector Sleeve). Note: these cable railing kits are ONLY for WOOD posts. Package includes: 20packs angle sleeves, 20packs adhesive sleeves, 40pcs adhesives, 1pc drill bit(9/32")..
  • Protective and Decorative Function - These stainless steel protector sleeves help protecting wood post and stainless steel cable from friction wear. Adding these protective sleeves will make it easier to stretch cable through posts and also beautify the rough edges of the drilled holes to create a clean look. Note: It works for wood posts only, not for metal posts.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.【Muzata's Guarantee】: Please feel free to contact us if you find any quality problems after installation. We'll provide you with the most attentive after-sales service.
  • Pre-Designed System - To help you construct a cable railing system, we pr....
Check Stock

Muzata 10Set Cable Railing Kit 1/8' Swage Lag Screw Turnbuckle Hardware Tensioner T316 Stainless Steel for Wood Post System Angle Stairs Deck 10 Cable Lines CK13,CA4 CA5

  • Elegance Look and Anti-twist- This cable railing fitting is well-designed in one piece to provide a pretty and elegant appearance. The turnbuckle could be adjusted from 8 3/16” to 11 1/32” to tighten the wire rope. Moreover, with right and left handed thread swage lag screws, wire rope can rotate in the same direction without twisting or damaging. Package includes: 10 right-hand turnbuckles, 10 left-hand terminals, 1pc bent wrench. It can make 10 cable runs.
  • For Level and Angle – This cable railing kit could work for both level and stair railings. That allows you to keep the same style on the level and angle sections. Recommend using with our patent angle drill guide Muzata CT19 to drill multi angle holes.
  • Marine Grade – This deck railing kit is made of T316 marine grade stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • WoodElegance System – We pre-designed a WoodElegance cable railing system to help you get a fully customized project. It includes cable railing kits Muzata CK13, level and angled protector sleeve (CR13-level, CR68-25-35°), 1/8″ wire rope Muzata WR01, hydraulic crimper and cutter set Muzata CK12, drill guide Muzata CT09. (Please not....
Check Stock

Muzata 4Pack Level drilled Cable Railing Post 36 x2 x2 Post Body 35 Fixed top Level Line Post Top Mount Black Finish Stainless Steel Wood Concrete Level Deck PS02 BH4S

  • Key feature - This square cable railing post (black finish) is designed for 36" residential cable railing projects. It is pre-drilled with 10 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. Pls search Muzata DG01 to find matched cable railing gate.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PD01 PD02 PW01 to find the aluminum cable railing posts.
  • Code compliance - This structural square post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS12 to find slice or rectangular stabilizer posts to get a broader view. It is important to consult local building offices about the rules since there might be d....
Check Stock

Muzata 10Pairs Invisible Cable Railing Kit 1/8\ Swageless Tensioner and Terminal Flat Head Hidden for 2\x2\ Metal Post Deck Stairs NiceView System CB05,CV2 CL1

  • ...ightening. 30 degree angled washer Muzata CR60 is needed for stair installation. Package includes: 10 pairs of tensioners and terminals,2pcs allen wrench.
  • Swageless and Reusable - With the patent swageless design, you don’t need the hydraulic crimper, greatly saves your time, efforts and also expenses. Most cable railing hardware is irreparable after swaging with wire rope if you get a wrong measurement or need adjustment. However, this tensioner can be reused by unscrewing the jackscrews and adjusting the cable length whenever you want to remeasure or rebuild.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System - We pre-designed a NiceView cable railing system to help you get a fully customized project, including cable railing kits CB05 CB17, protector sleeves CR72 CR66, angled washer CR60, stainless steel cable WR02, cable cutter CR12, socket wrench CT16,posts PS01 PS02, handrails HT10, handrail connectors (HA01 HA02 HA23 HA24. (Please note that package ONLY contains contents as stated in bullet point 1, other stuff mentioned is NOT included).
  • Why Choose Us - MUZATA has helped mill....
Check Stock

Muzata 4Pack Cable Railing Post 42''x2''x2'' (Post Body 41'') Flat Top Level-drilled Post Stainless Steel Black Finish Top Mount Wood Concrete Level Deck, PS02 BH4L

  • Key feature – This square cable railing post (black finish) is designed for 42″ commercial cable railing projects. It is pre-drilled with 12 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. Muzata invisible cable railing kit series is recommended to work with this post. Plz search Muzata CV2.
  • Weather protection – This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PM05 to find the aluminum cable railing posts.
  • Code Compliance – This structural square post is designed with 3″ cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4″ sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 to find slice stabilizer posts to get a broader view. It is important to consult local building offices about the rules....
Check Stock

Muzata Cable Railing Post Level-drilled Post Flat Top 36'x2'x2' Stainless Steel Black Finish Wood Concrete Top Mount Deck PS02 BH4S, PT1 PT2

  • Key feature – This square cable railing post (black finish) is designed for 36″ residential cable railing projects. It is pre-drilled with 10 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. Muzata invisible cable railing kit series is recommended to work with this post. Plz search Muzata CV2.
  • Weather protection – This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PM05 to find the aluminum cable railing posts.
  • Code Compliance – This structural square post is designed with 3″ cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4″ sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS12 to find slice or rectangular stabilizer posts to get a broader view. It is important to consult local building....
Check Stock

Muzata 4Pack Level drilled Cable Railing Post 42 x2 x2 Post Body 39 Adjustable Top Level Line Post Top Mount Stainless Steel Black Finish Wood Concrete Level Deck PS01 BH4L

  • Level line post - This square (2"x2") cable railing post (39" height) is designed for building 42" cable railing projects. It is pre-drilled with 12 level line holes. It can work as both structual end posts and middle posts in level sections.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, if your project is located near the seaside or humid areas, Muzata aluminum posts PD01/PD02/PW01 are highly recommended for its super strong salt tolerance.
  • Code compliance - This structural post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add an intermediate post between two structural posts. Search Muzata PS11 to get matched rectangular intermediate posts. Pls consult local building offices about the rules since there might be different requirements in some states.
  • Related Posts - You might need several post types to build a complete project: search PS01 BH4L for structural line posts, PS11 BH4L for intermediate posts, PS01 BC4L f....
Check Stock