6 Pack 3/4 inch Adjustable Pipe Bracket Clamp, Stainless Steel Wall Ceiling Mount Pipe Support Pipe Hanger Clamp, Split Ring Hanger ID 15mm-19mm
- 15-19mm Pipe Strap Clamp: The Pipe Clamp fits for 1/2 inch/15mm to 3/4 inch/19mm diameter pipe, the nut is M8..
- Stainless Steel Pole Clamp: The split ring hanger is made of 304 stainless steel, it durable and offers rust protection..
- Package included: 6 pack Pipe Bracket Clamp. Length: 2.2 inch/55mm, width: 1.1/ 28mm..
- Easy to Use: Easy to install, pipe bracket clamp can be installed on the wall or ceiling..
- Applications: These adjustable pipe support bracket clamp are suitable for both industrial and home applications..
Check Stock
Hose Clamps 304 Stainless Steel Worm Clamp, 13 FT Large Hose Clamp Strap with 10 Fasteners, DIY Worm Gear Hose Clamps Adjustable Pipe Hose Clamp for Plumbing, Automotive And Mechanical Applications
- DIY Hoses Clamp: you can trim the hose clamp strap in length you just need, then insert the fastener to make a suitable size you want, no more waste any materials.
- You will get 1 piece adjustable band hose clamp and 10 pieces fasteners, to meet your different needs.
- Durable Stainless Steel: The whole hose clamps (including the band, fasteners and screw) are built with 304 stainless steel, water-proof, rust-proof, corrosion-resistant, strong, durable, which can be applied in indoor and outdoor..
- Easy to Use: Just loosen or tighten the screw of hose clips by a screwdriver to adjust the size, attach hoses to the fitting tightly. Can be applied to secure hoses, pipes, cable, tubes, automotive, industrial, boat, etc..
- Perfect Application: The worm drive clamp is torsion-resistant, pressure-resistant, tightly locked, help to solve the problem of liquid gas leakage. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications..
- Reusable Used: It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
Check StockETCR2100A+ Digital Clamp Ground Earth Resistance Tester Meter 0.01Ω-200Ω
- Clamp Size:Φ1.26"(32mm),Clamp table size: 10.24"×3.54"×2.6"(260mm × 90mm × 66mm).
- Structural Feature：Clamp CT,and can measure the ground fault which can not be measured by traditional method.
- Measuring ground system with loop, there is no need to disconnect the ground wire without auxiliary electrode, which means safer and faster.
- Multi keyboard operation panel, new alarm and save functions.
- This Clamp meter widely applied in ground resistance measurement, loop resistance measurement in fields such as electric power, telecommunications, meteorology, oil field, architecture and industrial electrical equipment, etc.
Check Stock
Matthew Cleaning Commercial Quick-Change Iron Mop Handle for Floor Cleaning Heavy Duty Mop Stick Replacement 60inch Jaw Clamp-Style Wet Mop Handle 6 Packs
- Yellow Clamp-style Handle - industrial grade mop handles makes removing and replacing mops easily and efficiently, the jaw clamp and iron metal handle will firmly hold mops to help you work effectively..
- Easy to use - You’ll never have to touch a dirty mop head, this unique gripper clamp style, allow you to change mops simply rotate the screw above the jaw, clockwise to fasten the mop, and anticlockwise to unscrew the mop head.
- Suitable for commercial and industrial applications.
- Most optimal for 5" headband mops - Features the iron handles for corrosion resistance and a good strength-to-weight ratio, which is lightweight and ideal for general purpose mopping. his heavy duty commercial mop handles with jaw clam match well with most mops, such as cotton, string, looped, microfiber mops.
- Anti-slip & Anti-rust - the mop stick is crafted with rustproof steel pipe with non-slip pattern on it,comfortable to use and easy to maintenance!.
Check Stock
CAMWAY Digital Clamp Meter TRMS Amp Clamp Meter 6000counts Multimeter with LOWZ, LPF Function, AC Current AC DC Voltage NCV Continuity Capacitance Resistance Frequency Diode Hz Temperature Tester
- 【Multifunctional Clamp Meter】 Accurate AC/DC voltage, AC/DC current, Frequency, Duty Cycle, Resistance, Temperature, Diode, Continuity, NCV , etc. Wide Range of Applications, CAMWAY TRMS Amp Clamp Meter Ideal For Home & Professional Use, Automotive, Industrial Electrical Troubleshooting..
- 【LoZ& LPF Function】Low Impedance (LoZ) Mode Identify and Eliminate Stray Voltages, Besides, the Digital Clamp Meter also with Low Pass Filter ( LPF) Function for Remove Unnecessary High Frequency Components From The Input Signal to Remove High Frequency Interference..
- 【Ultra-clear LCD display】Made of High-quality Materials, Durable Practical, Wear-resistant Stable in Performance, Specially, When the 6000counts Multimeter Clamp Meter Measuring High Voltage (>80V), The LCD display Will Turn Orange..
- 【Hold & Backlight Button】 The Data Hold and Backlight Button are On The Side of the TRMS Amp Clamp Meter. A Short Press Will Hold The Data For You, A Long Press Will Turn The Backlight On. Convenient for One-handed Operation..
- 【Convenient Clamp】Digital Clamp Meter Avoid Hazardous Situations by Using the Convenient Clamp To Safely Measure AC Currents Without Having To Strip Cord or Break Circuit..
Check StockHose Clamp Stainless Steel DIY 7.9 FT Metal Strapping with Holes + 6 Fasteners Large Adjustable Clamp Worm Gear Hose Clamps Pipe Clamp Band Clamp Air Ducting Clamp for Pipe Automotive Cable Tube
- ... outdoors and in coastal areas. Solid and sturdy material ensure the adjustable hose clamps last a long time for use, and can be reused..
- Powerful Function: The worm drive clamp is torsion-resistant, pressure-resistant, tightly locked, helps to solve the problem of liquid gas leakage. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications..
- Easy to Use: You just need to attach the fastener into the pipe strap like picture 5, and then loosen or tighten the screw of the hose clip with a screwdriver to adjust the size, attach the hose to the fitting tightly. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications..
Check Stock
Pony Tools 50 3/4in. 6 Pack Ajustable Clamp Fixture for Black Pipe
- Pony 50 Clamp Fixture for 3/4 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
- Mounts on any length 3/4" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
- Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
- Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
- Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.
Check Stock
Pony Tools 52 6 Pack 1/2in. Ajustable Clamp Fixture for Black Pipe
- Pony 52 Clamp Fixture for 1/2 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
- Mounts on any length 1/2" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
- Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
- Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
- Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.
Check StockPortable LED Work Light, Clamps or Hangs, Lightweight Design, 1800 Lumens, 15 Watts, 4000K Daylight, IP65, ETL Certified
- BRIGHT LED WORK LIGHT - Work on your projects with ease with this super bright portable work lamp.
- Features a clamp or hanger for easy lighting adjustment.
- STURDY LIGHT WEIGHT DESIGN - Ergonomically designed to ensure ease of use.
- Rugged construction ideal for contractor work, industrial settings, as well as home use.
- Features sturdy metal clamp and hanger for easy placement.
- MULTI-FUNCTIONAL WORK LIGHT - Can be used in variety of home and industrial settings.
- Automotive shops, garages, construction, camping, backyards, sheds, studios and photography, security, outdoor night lighting.
- ETL LISTED DEVICE - Save on energy consumption with energy efficient LED lighting.
- DAMP LOCATIONS - LED work light can be used in damp locations, suitable for indoor and outdoor use.
Check StockGlobe Electric 52955 Pratt 18\ Adjustable Height Clamp-Arm Desk Lamp, Matte Black, in-Line On/Off Switch
- INDUSTRIAL DESIGN: functional as well as stylish, the matte black Pratt Desk Lamp offers a customizable design epitomizing the industrial design trend.
- CLAMP BASE + SWIVEL ARM: the clamp base allows you to secure your light to any 2-inch surface while the 360-degree swivel arm ensures your light will always be pointing in the right direction.
- BULB REQUIREMENTS: 1x E26 Medium Base A19 Shape 50W Maximum Bulb (sold separately) - Compatible with LED, Incandescent and Halogen Bulbs - LED or Incandescent recommended.
- ADJUSTABLE HEIGHT: adjustable from 16-inches to 18-inches, this light will always be the perfect size for your lighting needs.
- PIVOTING LAMP HEAD: the pivoting lamp head lets you direct the light where you need it most, no matter where you've clamped the lamp.
Check StockISPINNER 52pcs Cable Clamps Assortment Kit 304 Stainless Steel Rubber Cushion Pipe Clamps in 6 Sizes 1/4 5/16 3/8 1/2 5/8 3/4
- ✅【HIGH QUALITY】Made of high quality rubber cushioned stainless steel, with high performance of corrosion resistance and acid resistance, they....
- ✅【SIZE & QUANTITY】This 52pcs cable clamps assortment kit includes 6 different sizes for you to deal with multiple different situations. It....
- ✅【UNIQUE DESIGN】The rubber on the clamp can help prevent vibration and impact from clamp edges on the held objects. The width of whole clamp is....
- ✅【EASY TO USE】The installation is easy, just find a correct clamp and put it into wires/pipes, tighten it with M6 screws. Comes with a....
- ✅【WIDE APPLICATION】It is very suitable to apply in automotive, industrial, boat/ship, windshield, household and other indoor/outdoor application....
Check Stock
GLIDESTORE 4-Inch Key Hose Clamp Key-Type Adjustable Stainless Steel Hose Clamps Pipe Clamp Worm Gear Clamps Dryer Vent Clamp Thumb Screw Metal Clamps Pack of 10 Easy Turn Clamp 4 - Inch
- ✔ HIGH-END MATERIAL: Hose clamps stainless steel made of stainless steel, constructed to resist scaling and corrosion and ensure long- term use..
- ✔ AMAZING FUNCTION: These dryer vent clamp are used to lock the hose tightly with a view to preventing flow leakage. This hose clamp assortment kit can be applied for securing hose, cable, pipe, tube, fuel lines in domestic applications, automotive, boat, industrial and so on..
- ✔ EASY TO USE: Can be simply loosened or tightened by using the adjustable handle without any other tools..
- ✔ HUGE QUANTILY, SMALL COST: Each package consists of 10 pack 4-inch hose clamp (Easy Turn Clamp), the size of each clamp is about 4 inch (DIAMETER).
- ✔ 100% MONEY BACK GUARANTEE: Customer satisfaction is our utmost priority. If you are dissatisfied with 4 hose clamp, drop us a message and we are certain to give you a full refund..
Check Stock
Houseables Spring Clamp, A Clamps, Hand Squeeze Clips, 6 Inch, Metal, 8 Pack, Orange, Heavy Duty, Large, Strong, Quick Grip, Strong Hardware Claps for Woodworking, Wood, Pony, Photography, Furniture
- INDUSTRIAL GRADE CLAMPS - Our heavy duty clamps provide you with industrial strength clamping action for gluing, clamping, gripping any home or DIY projects. The strong and reliable grip won’t give way and will hold almost all materials.
- 3 INCH JAW-OPENING: Our clamps provides you with 3 inches of maximum opening mouth so you can fit it around thick boards, poles, walls, and more. Clamp photography backdrops to stands without slipping or sliding.
- STRONG CLAMPING HOLD: The downward clamping force is reliable with a strong hold. Our heavy-duty spring clamps will be your tool of choice for projects where you need extra hold. The PVC coated tips will keep the metal clamp from digging in and destroying projects.
- 8 HEAVY DUTY CLAMPS: You’ll receive 8 heavy duty clamps per pack. Each clamp is 6 inches in length with PVC coated handles for a soft yet strong grip. More than enough clamps for multiple projects. Stiff enough for a stronghold, yet just enough give for easy handling.
- GRIP’S CHOICE: Our heavy duty clips are every set grip’s choice. Perfect for rigging lights, sets, and anything else you might need a clip for!.
Check Stock
