Best Industrial Cobalt M42 Metal Drill Bit Set

Topline Cutting Tools No. 7 Drill Bits Cobalt M42 4-Pk

  • Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum.
  • Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits.
  • High-heat resistant bits – withstand high-temperature applications for extended periods of time.
  • Thick web-helix design – provides additional stability in tough applications.Case Type:Plastic.
  • Surface-hardened tip – penetrates tough abrasive materials.
Check Stock

BOSCH CO2159B 1/2 In. x 6 In. Cobalt M42 Drill Bit

  • Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum.
  • Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits.
  • High-heat resistant bits – withstand high-temperature applications for extended periods of time.
  • Thick web-helix design – provides additional stability in tough applications.
  • Surface-hardened tip – penetrates tough abrasive materials.
Check Stock

KHCRAFT Bi-Metal Hole Saw Kit High Speed Steel M42 with Cobalt 8% for Metal and Wood 13-Piece General Purpose 3/4

  • Professional high speed steel M42 (not M3) with cobalt 8% cutting teeth hardened to control the efficient and durable and reliable use on workpieces like sheet metal, Aluminium, wood, plastic, plasterboard, etc.. HSS M42 teeth is particularly good for high strength metal such as stainless steel (HSS M3 ones are good for middle strength metal but not high strength one) because HSS M42 contains cobalt 8%, which raises the hardness of the teeth. HSS M42 is about 20% more durable than HSS M3..
  • 9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
  • 4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
  • arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
  • with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill ....
Check Stock

Drill America - D/ACO1/8P12 1/8" Cobalt Heavy Duty Drill Bit (Pack of 12), D/ACO Series

  • Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum.
  • Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits.
  • High-heat resistant bits – withstand high-temperature applications for extended periods of time.
  • Thick web-helix design – provides additional stability in tough applications.Case Type:Plastic.
  • Surface-hardened tip – penetrates tough abrasive materials.
Check Stock

DIOBATO M42 Cobalt Drill Bit Set for Metal, Stainless Steel, Cast Iron, Wood - 13 Piece,Multiple Point

  • M42 Cobalt drill bit set for metal.Using unique process technology, each bit contains about 8% cobalt, which can easily handle common stainless steel materials and various light and medium metals.
  • Size - 1/16“ 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 3/16" 11/64" 13/64" 7/32" 15/64" 1/4".
  • Multi-blade tip-design,increase the pressure on the material when drilling, and it cuts faster and more smoothly than the general 135° drill..
  • thick web-helix design,fast cuts with smooth chip evacuation.
  • Applicable Materials - For Stainless Steel, Cast Iron, Titanium, Light Metals and Aluminum etc.
  • Applicable device - CNC machine, precision drilling machine, bench drill, medium and high power electric hand drill.
Check Stock

STROTON Metric M42 8% Cobalt Drill Bits Set Titanium Nitride Coated for Stainless Steel and Hard Metal 1mm-10mm/19pcs

  • Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life..
  • 3 Steps Desigh for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic and Hardwood. The Sufficiently Sharp Bit Edge Can Cut the Metal....
  • True Titanium Nitride Coated Increases the Bit Surface and Metal Lubrication,Conducive to Chip Removal,Reduce Heat Increase..
  • This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill....
  • 19Pcs 135 Degree Split Point Drill Bits Includes :1mm(length:3.4cm) 1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm(length:8.5cm) 5.5mm 6mm(length:9cm) 6.5mm....
Check Stock

STROTON Cobalt Drill Bit Set (1/16-1/4 Inch, 13PCS), M35 High Speed Steel Twist Drill Bits for Stainless Steel, Hard Metal, Cast Iron, Plastic and Wood

  • 【Premium True 5% Cobalt Steel with 68 HRC】- The Marked Cobalt Content of Ordinary Drill Bits May be False, but This Drill Bits Set is Made of Cobalt Ore from Our Own Mine, Which Indeed Contains 5% Cobalt. Although the Cost and Price are Slightly Higher, It Usually is able to Provide 3X Heat,Wear and Chip Resistance and 3X Tool Life..
  • 【Split Point Design and Fully Ground Process】- Compared with Other Ordinary Drill Bits, This Drill Bits Set is Particularly Suitable for Heavy Duty Work, Such as Cutting through Stainless Steel,Steel Plate,Iron Sheet, Cast Iron and Hardwood, and Drilling Out Bolts Studs and Screws..
  • 【3X Efficiency + 3X Tool Life】- This Cobalt High Speed Steel Drill Bits Set is Typically Capable of Running 3 Times Faster. Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes..
  • 【Sharp Drill Bit Edge】- This Kind of Drill Bits Beast Can Even Cut Hardened Metal into Long Iron Bars, While a Dull Drill Bit Can Just Slowly Wear Through Metal..
  • 【13 Pieces Jobber Length Industrial Drill Bits Includes】:1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4 [DIA 1/64 Inch Increments].
Check Stock

Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1mm-10mm/19pcs)

  • Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life..
  • 3 Steps Desigh for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic..
  • This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes..
  • The Sufficiently Sharp Bit Edge Can Cut the Metal Material into Long Strips of Iron Chips rather than Slowly Grinding Throng the Material with a Blunt Drill Bit..
  • 19Pcs 135 Degree Split Point Drill Bits Includes :1mm(length:3.4cm) 1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm(length:8.5cm) 5.5mm 6mm(length:9cm) 6.5mm 7mm 7.5mm 8mm(length:11.5cm) 8.5mm 9mm 9.5mm 10mm(length:13cm) [DIA 0.5mm Increments] ..
Check Stock

MAXTOOL 1/8" 10pcs Identical Jobber Length Drills HSS M42 Twist Drill Bits 8% Cobalt Fully Ground Golden Straight Shank Drills; JBF42G10R08P10

  • Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum.
  • Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits.
  • High-heat resistant bits – withstand high-temperature applications for extended periods of time.
  • Thick web-helix design – provides additional stability in tough applications.Case Type:Plastic.
  • Surface-hardened tip – penetrates tough abrasive materials.
Check Stock

Legacy Woodturning Battalion Pen Kit Starter Pack with Bushings Hurricane M42 Cobalt Drill Bit Pen Kits Wood Pen Blank Sampler Pack

  • Finishes: 1 Antique Bronze Polish, 1 Gun Polish, 1 Army Green.
  • Blank Size: 5/8" x 5" (3 Assorted Wood Blanks Included).
  • Bundle includes Pen Kits in assorted finishes, M42 Cobalt Drill Bit, Bushings, and Wood Pen Blank sampler pack.
Check Stock

EZARC Bi-Metal Hole Saw Kit, 13-piece Hole Saws Set Cobalt Drill Hole Cutter with Mandrels for Sheet Metal, Wood, Drywall, Aluminum, Plastic Plate, Plasterboard

  • 【Long-lasting & Durability】Professional high speed steel M42 (not M2) with 8% cobalt ensures more heat resistance of the teeth, This hole saw provides more than 50% longer lifetime on drilling various materials such as metal, hard wood, plastic and plasterboard..
  • 【Efficient Plug Remove】Our metal hole saw kit with 3X sideling slot design can effectively remove plugs and increase operating speed..
  • 【Fast & Clean Cutting】The 4/6 variable teeth configuration allow hole saw kit for metal and wood to provide clean and fast cutting in the most demanding applications..
  • 【Hex Shank Arbor with Adapter】EZARC hex shank arbor with an extra adapter can fit all size metal hole saws from small to large diameters. The pilot drill bit is made of premium high-speed steel for precise positioning and rapid drilling for longer service life..
  • 【Complete Hole Saw Set】9pcs M42 Bi-metal hole saw: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm),to meet needs of different situations. 1 x Small Mandrel, 1 x Large Mandrel with Adapter and Pilot Drill Bit. The maximum cutting depth is 1-7/8" (48mm)..
Check Stock

M35,5% Cobalt Drill bit Set 1.5mm-6.5mmMetric Drill bits Set Metal Drill bits for Steel(13pcs)

  • COPOUIXR High speed steel with cobalt drill bit set for hardened steel 13pcs.
  • High speed steel cobalt drill bits for metal 5% cobalt drill bit set steel drill bits for hard metal diamonds are ideal for stainless steel and hard metals.
  • 135% self-sharpening impact drill set Drill point with built-in positioning function that requires no additional positioning Easy penetration of hard metals Long torsion bar cutting edge with different drilling depth option.
  • metric drill bit set for metal1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm drill bit for metal A total of 13 round bar drills of different diameters, suitable for home manual scenes and professional work.
  • Compact storage box Easy to carry and store drill bits Box size identification for easy selection and storage.
Check Stock

wesleydrill 1' Reduced-Shank Drill Bit 1/2 Inch Shank Silver and Deming Industrial Drill Bit Fit for Home DIY and General Building/Engineering/Woodworking

  • [Specifications and Packaging]: 1 Pc reduced-shank drill bit and 1 pc plastic tube.Include Size:1″..
  • [Fitment]: Hss drill bit set for metal/ wood/ plastic. Suitable for home DIY, and general building/engineering/woodworking use..
  • [Material]: Metal drill bit used high speed steel M2 black and gold, resists corrosion, ensures outstanding durability, sharpness and capability, reduces the friction and runs cooler..
  • [Advantage]: Industrial drill bit Increases cutting speed with self-centering and prevents walking, clears chips and particles faster. The split point tip can increase the wear resistance..
  • [Special Design 135-Degree]: Cobalt drill bit 135-degree penetrates hard material without a pilot hole and produces small chips to reduce clogging..
Check Stock