Best Industrial Module
ACEIRMC 4pcs Si7021 GY-21 SHT21 HTU21 Digital Humidity Temperature Sensor Module Replace SHT11 SHT15
- The humidity and temperature sensor board that carries a digital SHT21 humidity and temperature sensor from Sensirion..
- Si7021 GY-21 Module Industrial High Precision Humidity Sensor I2C IIC Interface Module For Arduino Low Power CMOS IC Module.
- It has a 4-pin interface that can communicate directly with the analog pins.
- It can be used as a hardware- and software-compatible drop-in upgrade for existing RH/temperature sensors in 3x3 mm DFN-6 packages, featuring precision sensing over a wider range and lower power consumption..
- The Si7021 offers an accurate, low-power, factory-calibrated digital solution ideal for measuring humidity, dew-point, and temperature, in applications ranging from HVAC/R and asset tracking to industrial and consumer platforms..
Check StockHiLetgo 2pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino
- Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth....
- Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged....
- Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART....
- The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control,....
- Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port....
Check StockXimimark 1PCS 5V 12864 LCD Display Module 128x64 Dots Graphic Matrix LCD Blue Backlight
- 12864 LCD Display Module 128x64 Dots Graphic Blue Color Backlight.
- This product is a LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking.
- Package included: 1PCS x 5V LCD Display Module 128x64 Dots Graphic Matrix LCD 12864 Blue Backlight New.
- If You Are Not Satisfied with Your Purchase for Any Reason, Please Feel Free To Contact Us at the Buyer Center or Support Email, 24/7 Quick Reply..
Check StockHiLetgo HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino
- Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane.
- Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid..
- Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART &Storage Temperature:-40℃~+150℃&Signal coverage: 30ft &Item size: 4.3 * 1.6 * 0.7cm &Item weight: 3g..
- The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect..
- Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices..
Check StockPainless Performance 80132 Single Pole, Double Throw Relay, 40 Amp
- ★ The 8-channel relay module is equipped with transistors, diodes and optocouplers to switch higher loads safely, reliably and with little power. The module is also equipped with generously dimensioned relays in order to be able to reliably carry out many switching processes..
- ★ 5V 8-channel relay module, each relay requires 70mA for switching (switching capacity AC: max. 250V / 10A.
- ★ 5V 8-channel relay module can be controlled directly with a microcontroller Raspberry Pi, Arduin, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic, etc..
- ★ The relay acts as a switch that responds to a signal from the Arduin. Because of this, it is widely used in IoT projects to control lights and other electronic devices..
- ★ Application: MCU control, PLC control, industrial area, smart home.If you need this relay, you can buy it directly. If there is a problem during use, you can contact us at any time to refund or replace it..
Check StockOCESTORE USB Isolator Module ADUM3160 USB to USB Voltage Isolator Board USB Digital Isolation Protection with OC Protection 5KV ESD MAX
- 【OPTIMAL PERFORMANCE】OCESTORE premium upgrade USB Isolator Module adopts Combining high speed CMOS and monolithic air core transformer technology, this isolation component provides outstanding performance characteristics and is easily integrated with low and full speed USB-compatible peripheral devices..
- 【HIGH QUALITY】OCESTORE premium USB Isolator Module is made of high quality material which can use for a long time.Note: USB Isolator Module can't work for USB 2.0 High Speed Devices.Only work for USB1.0 USB 1.1 USB2.0 Devices..
- 【SUPER IMPORTATNT】OCESTORE premium USB Isolator Module can widely compatible with A variety of industrial USB devices Noise sensitive areas.1W MAX. Low and full speed data rate: 1.5 Mbps and 12 Mbps.
- 【WIDE APPLICATION】OCESTORE premium USB Isolator Module is widely used in Electronics,Computers,Accessories,Computer Accessories,Peripherals,Computer Cable Adapters,USB-to-USB Adapters..
- 【PACKAGE & SERVICE】Package Include: 1 Pcs x USB Isolator Module .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check StockPC Interface Controller
- 【One-year after-sale warranty】The PWM to voltage module converts PWM digital signals to 0 to 10V analog signals. It can be used to switch the signal interface of PLC or other industrial control board. Adjust the output voltage by adjusting the PWM duty cycle. The module is small in size and easy to apply in different places.003cbr003e.
- Using MCU embedded technology. Easy to operate, can be fine-tuned by potentiometer.003cbr003e.
- Select the PWM signal input level range by short circuit. The module is small, easy to carry and easy to use.003cbr003e.
- (current greater than 100mA),PWM signal receiving frequency range: 1KHZ-3KHZ.
- When power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM and GND. Jumper caps set the corresponding voltage range. When the frequency is 1KHZ-3KHZ, use a multimeter to measure the two ports of VOUT and GND. At this time, the meter displays about 5V. Adjust the potentiometer on the board so that the multimeter displays 5.00v.003cbr003e.
Check StockThrustmaster Warthog F16 Falcon Custom Plate
- Life-size (1:1 scale) replica of the real F-16C Viper flight stick..
- 100% metal design incorporating durable, industrial-grade materials for an authentic feel and maximum product lifespan..
- 19 action buttons in total, plus one 8-way “point of view” hat switch..
- Native integration in the game DCS via the dedicated DCS: F-16C Viper module (game and module sold separately), and compatible in all other flight....
- Compatible with three joystick bases in Thrustmaster’s flight simulation ecosystem: HOTAS Cougar*, HOTAS Warthog and HOTAS Magnetic Base (all sold....
Check StockAdjustable 5000-10000 mg/h Double O3 Commercial Ozone Generator Industrial Air Purifier, Ionizer & Deodorizer Ozone Machine for Home, Car, Smoke, hotels, Farms and Pets
- Adjustable High(10,000mg) & Low(5,000mg) Output- The ONLY machine in market that's adjustable (with 2 ozone module inside)..
- Patent Pending Quick Ozone Change Adaptor- Easy to clean ozone module without opening the machine..
- Trusted Brand- Over 10+ Years of Sales & Service. Buy with confidence..
- Powder Coated Exterior- Industrial powder coating for extra durability and usage..
- Extra Large & Extra Heavy Duty Design- 2x Ozone Module, Larger Unit with Larger Handle, and Extra Heavy-duty performance..
Check StockThrustmaster Warthog F18 Hornet Custom Plate
- Life-size (1:1 scale) replica of the real F-16C Viper flight stick..
- 100% metal design incorporating durable, industrial-grade materials for an authentic feel and maximum product lifespan..
- 19 action buttons in total, plus one 8-way “point of view” hat switch..
- Native integration in the game DCS via the dedicated DCS: F-16C Viper module (game and module sold separately), and compatible in all other flight....
- The TWCS (Thrustmaster Weapon Control System) throttle is the new component of the Thrustmaster flightsim ecosystem. It is compatible with PC via USB....
Check StockLCD Touch Panels Touchpanel Analog for DOGM128-6 (EA TOUCH128-1)
- ...wide viewing angle, adjustable brightness(300 cd/m²) , TTF Font and contrast (500:1) offers you the ultimate project experience to accomplish more with improved results..
- Ultimate TFT LCD Display Module for Industry - SCBRHMI Intelligent TFT-LCD Module Model STWI070WT-01 is a customer favorite for a wide range of industrial and business applications. You get highest quality with the most usable functions. Often purchased for equipment in medical, beauty, engineering, industrial control, electric power, civil electronics, automation, traffic, new energy, and IOT applications..
- Generous 3 Year Warranty - We make SCBRHMI products to last and work well on the job. If this breaks, return it and we will replace it at no cost. Our displays all pass CE/RoHS/FCC/ISO9001 International Certification and 24 hours Aging Testing. We offer professional technical support around the clock along with our popular user help group..
Check StockQuarton Laser Module VLM-520-73 LPT (Direct Green DOT Laser Module, 3~6V)
- Working Voltage:3V-5.5V,Working Current 003c180mA.
- This violet/blue laser module with driver is an industrial electronic component and used for industrial testament, Lab etc..
- Please be careful when you are doing some test on it if there is no temperature control device..
Check StockUMLIFE 3pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 3pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino Raspberry Pi
- ❃❃ Package Included:3 x ACS712 Hall Effect Current Sensor Module + 3x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
- ❃❃A wide range of applications:The current sensor ACS712 provides economical and accurate solutions for ac or dc sensing in industrial, commercial and communication systems. Typical applications include motor control, load detection and management, switching power supply and overcurrent fault protection..
- ❃❃ACS712 Hall Effect Current Sensor Module:Chip: ACS712ELC-30A.
- Pin 5V power supply, on-board power indicator.
- ❃❃Voltage Sensor Module:Voltage input range: DC0-25V.
- input : Terminal cathode connected to VCC, GND negative pole.
- Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for AD pins..
- ❃❃Perfect Combination:Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
Check Stock