COG Rotary Shaft Oil Seal Mechanical Metric NBR Seals with Double Lips Spring Wear Resistance and Sealing Effect TC 25x42x10 NBR 10PCS
- Type: CO G-xTCx25 Double Lips Oil Seals003cBr003e Metric oil seals, replacement part for aftermarket.
- Design: Carbon Spring,Carbon skeleton,70 Shore A Nitrile Rubber.
- Recommended on the occasion of low pressure without dust.Max Pressure 0.05MPA (0.5kgf/cm2).
- Nitrile Rubber Temperature Range: -40º ~125º C.(-40°F~ 257°F).
- COG Oil seals are widely used in various devices, such as Automobile, motorcycle, industrial automation, household appliances, driving machinery as well as general motors.
Check StockCOG Rotary Shaft Oil Seal Mechanical Metric NBR Seals with Double Lips Spring Wear Resistance and Sealing Effect TC 35x52x10 NBR 2PCS
- Type: TC 35x52x10 NBRDouble Lips Oil Seals003cBr003e Metric oil seals, replacement part for aftermarket.
- Design: Carbon Spring,Carbon Skeleton,70 Shore A Nitrile Rubber.
- Recommended on the occasion of low pressure without dust.Max Pressure 0.05MPA (0.5kgf/cm2).
- Nitrile rubber Temperature Range: -40º ~125º C.(-40°F~ 257°F).
- COG Oil seals are widely used in various devices, such as Automobile, motorcycle, industrial automation, household appliances, driving machinery as well as general motors.
Check StockPSS Shaft Seal 03-112-212 PRO Shaft Seal for 1 1/2\ Shaft Diameter
- World leading dripless mechanical face seal for marine applications.
- Ideal replacement for packing glands and lip seals in marine or industrial environments.
- 4 ply polyester fabric wrapped silicone bellow, PYI Shaft Retention Collar (SRC), and 316SS hose clamps for commercial and industrial applications.
- Certified by ABS, BV (or Bureau Veritas), RINA, and US Coast guard approved.
Check StockHouse of Kolor QUART KIT GRAY Color KD3000 DTS Surfacer / Sealer w/ Hardener
- METERED STATIC MIXING: Dual syringe cartridge eliminates the difficulty and mess of manual mixing.
- TWO-PART URETHANE: Seals vertical or horizontal seams to match OEM seals.
- NO TOOLING REQUIRED: Flows slightly and softens on the edges for a rounded appearance.
- QUICK CURE TIME: Non-sag property aids during vertical applications.
- CREATE A RIBBON BEAD: Use a 3M OEM Sealer Tip - 3/8 inch Flat PN 08204.
- For industrial/occupational use only. Not for consumer sale or use..
Check StockXLBH Machinery Seal 155-10/11/12/13/14/15/16/17/18 10mm 11mm 13mm 14mm 15mm 16mm 17mm 18mm Inner Diameter Single Coil Spring Bellows Mechanical Seal Tightly Sealed (Color : 1pc 14mm)
- Type: SC 20x42x7 NBR Single lip Oil Seals Metric oil seals, replacement part for aftermarket.
- Design: Carbon Spring,Carbon Skeleton,70 Shore A Nitrile Rubber.
- Recommended on the occasion of low pressure without dust.Max Pressure 0.05MPA (0.5kgf/cm2).
- Nitrile rubber Temperature Range: -40º ~125º C.(-40°F~ 257°F).
- COG Oil seals are widely used in various devices, such as Automobile, motorcycle, industrial automation, household appliances, driving machinery as well as general motors.
Check StockHILLMAN Stainless Steel Sprayer Series for Extended Life and Durability (2 Gallon)
- 304 Stainless Steel Tank Made from cold rolled Industrial quality Stainless Ste.
- They are very easy to maintain and low cost. These sprayers a have long life and are ideal for spraying on all fields.
- With pressure gauge and safety relief valve allows you to safely remove internal pressure prior to open the sprayer Ergonomic handle for easy pumping and carrying Stainless steel pump with brass nut, Viton seals available for option Long reinforced hose for easier reach.
- EPDM Seals and gaskets are best for spraying all kinds of chemicals. Brass shut off with lock-on feature for fatigue-free spraying.
- Protectors are easily removed for cleaning and provide the utmost in protection..
Check StockAIRIC 3/8in Heat Shrink Tubing Roll, 3:1 Heat Shrink Tube Adhesive Lined - Dual Wall Tube - Marine Heat-Shrink Tubing Industrial, Black, 50 Feet Roll
- What You Get: Industrial black heat shrink tubing roll, Dia 3/8 inch (9.5mm), 50 feet length..
- Adhesive Lined Black Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation. Industrial grade tubing is resistant to fluids, heat, and mechanical stretch..
- 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing clear is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
- Safer Dual Wall Tube: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief. Outer wall is flame retardant, but the glue is not flame retardant..
- Wide Applications: Our clear waterproof heat shrink tubing industrial can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check StockLoctite SI 7657 Copper Hi-Temp Gasket Sealant Spray for Automotive: High Temp, Oil Resistant, Improves Heat Transfer | Gold Mist, 9oz Aerosol Can (PN: 37583-502911)
- METERED STATIC MIXING: Dual syringe cartridge eliminates the difficulty and mess of manual mixing.
- TWO-PART URETHANE: Seals vertical or horizontal seams to match OEM seals.
- NO TOOLING REQUIRED: Flows slightly and softens on the edges for a rounded appearance.
- QUICK CURE TIME: Non-sag property aids during vertical applications.
- CREATE A RIBBON BEAD: Use a 3M OEM Sealer Tip - 3/8 inch Flat PN 08204.
- For industrial/occupational use only. Not for consumer sale or use..
Check StockOKVEQUIP A19 Pneumatic Strapping Tool,Hand Held Banding Tools for Strapping, Portable Packaging Strapping Machine for 1/2\-3/4\ PP &PET Strapping
- 【Value for money】Comes with 200 plastic metal strapping open seals, a poly strapping tensioner and a sealer tool , the kit is a good helper for you when you are packing. Please note that this set is not included the strapping banding coil..
- 【High quality】 Our handy strapping kit is of all harden steel construct ensuring durability and long lifetime. PP/PET Strap recommend from 1/2 to 3/4 inch width. Free 200 semi open metal seals are for strapping..
- 【Easy to use】The manual banding tools are easy to operate, lightweight, and simple to work on horizontal or vertical surfaces without the need for specialized skills. When you use them, not only saves time but also increases work efficiency..
- 【Widely Used】This ratchet tensioner tool is ideal for industrial strapping and household packaging, such as warehouses, garages, pallets, docks, fixed goods during transportation to ensure cargo safety, also bundled glass, pipe, material, fruit and so on..
- 【100% money back guarantee】We promise 100% Money Back or Exchange Items Service when you need it. If you need any help about the size of seals or straps, please feel free to email us, we will respond to you in 12 hours..
Check StockPSS Shaft Seal for 1\ Shaft Diameter, PYI Inc
- World leading dripless mechanical face seal for marine applications..
- Ideal replacement for packing glands and lip seals in marine or industrial environments.
- Highly durable, low maintenance and cost-effective solution..
- Certified by ABS, BV (or Bureau Veritas), RINA, and US Coast Guard approved..
Check StockAir Tool Pneumatic Lubricant - 8oz - Translucent Clear
- Lubricates and protects your air tools from friction damage..
- Industrial strength to provide long lasting protection.
- Helps to reduce rust, varnish and sludge.
- Prevents the build up of harmful deposits.
- Helps to keep elasticity and form of seals and O-rings.
Check StockPremium Air Tool Lubricant - 64 FL. OZ. Industrial Pneumatic Tool Oil
- Preserves the Elasticity and Form of Seals and O-Rings.
Check StockChampion Cutting Tool BruteLube 16 oz Tub Cutting Wax Lubricant: XLUB-WAX-16
- Preserves the Elasticity and Form of Seals and O-Rings.
Check Stock