Categories

Best Industrial Steel Shank

Sepuly 10Pcs Magnetic Torx Head Screw Driver Bits 75mm/3inch Long 1/4inch Hex Shank Security Tamper Proof Magnetic Torx Bit T10

  • 10Pcs T10 Magnetic Screwdriver Bits in a Pack.
  • These security bits are made to last with S2 Steel construction, the surface is smooth and it is wear resistance, whole reflection is hardening..
  • Magnetic torx security head, easy to suck the screw and firmly fixed on pneumatic screwdrivers, electric screwdriver or rechargeable drill.
  • suitable for industrial use and with hand, air, or power tools.
  • Wide Using Application: Can be used with electric screwdriver, manual screwdriver, electric drill, group general tools, etc..
Check Stock

amoolo Hex Shank Drill Bit Set (16 Pcs), Premium 4341 HSS Titanium Impact Hex Drill Bits for Wood, Steel, Metal, Plastic, Quick Change Design (1/16”-3/8”)

  • 【COMBO SET OF 16 PCS】12 most commonly-used sizes (1/16",5/64",3/32",7/64",1/8",9/64",5/32",3/16",7/32",1/4",5/16",3/8") to satisfy all needs, additional piece of 1/16", 5/64", 3/32" and 1/8"for easy replacement. Total 16 Pcs hex shank twist drill bit set come with a portable plastic case for easy select, storage and carry..
  • 【ADVANCED HSS TITANIUM COATING】Industrial grade 4341 high speed steel drill bits set, harder than 4241 HSS and has stronger cutting capacity. Titanium coating increases wear-resistance and durability..
  • 【FULLY GROUND PROCESS & 135° SPLIT POINT】Fully ground spiral flute discharge scraps quickly, reduce friction and heat, therefore provides a faster, cooler and more efficient drilling performance.
  • 135° Split Point with straight shank prevents slippage and makes drilling stable and precise. No center punch is needed..
  • 【QUICK CHANGE】1/4"(6.4mm) hex shank base well fits into majority pistol drill and drill press, more easily and securely installation without slippage and shedding..
  • 【MULTIPLE APPLICATION】Small Drill bits for wood, plastic, steel plate ≤ 5mm, aluminum alloy and other soft metals..
Check Stock

Organ Needle - 100 Organ DBXK5 Ball Point Needles Compatible with Tajima Barudan SWF Industrial Embroidery Machines (Size 75/11)

  • Box of 100 Organ DBXK5 Commercial Industrial Embroidery Machine Needles (Size 75/11)..
  • Only compatible for industrial embroidery sewing machines. The needle shank is round, rather than flat surface, which is not suitable for household embroidery machines..
  • ORGAN DBXK5 needles are available in following sizes, please select your size : Size 60/8 Size 65/9 Size 70/10 Size 75/11 Size 80/12 Size 90/14 Size 100/16 Size 110/18.
  • DBXK5 needle is round at the shank and are normally used on industrial embroidery machines. This is a very common needle system used by many Industrial Embroidery machines including Barudan, Brother SWF, Tajima and many other industrial embroidery machines..
  • Compatible with/Replacement for TAJIMA brand, BARUDAN brand, MELCO brand, HAPPY brand, MEISTERGRAM brand, ULTRAMATIC brand, PFAFF brand, BROTHER brand, ZSK brand, ZANGS brand, SWF brand, RENAISSANCE brand, MARCO brand, GROSS brand AND ALL OTHERS..
Check Stock

Yakamoz 1/2 Inch Shank Adjustable 3 Wing Slot Cutter Router Bit Set with 6-Picecs Slotting Cutters | 1/2 Inch Cutting Depth & 6 Different Cutting Widths

  • 100% New Brand Industrial Quality Router Bits For Router woodworking.
  • C3 micro-grain tungsten carbide blades, high-quality alloy steel bodies with anti-kickback design..
  • Heat resistant Teflon coating to prevent building-up of sawdust, resin, and pitch..
  • Designed for desktop engraving machines and table-mounted router, it can not be used in electric drill & drill machines. Suitable for woods, mdf, particle board, plywood compact panel, avoid cutting ferrous metal and non wood materials, such as: Steel, iron, sand, etc.
  • Note: 1/2" Shank included ONLY! The holder of the blades cannot use as a 1/4 shank, it can not be used on router machines..
Check Stock

GROZ-BECKERT Needle in CKPSMS Clear Plastic Box- 100 Groz Beckert DBXK5 Industrial Embroidery Sewing Machine Needles Compatible with Tajima Barudan SWF (Size 80/12)

  • IMPORTANT: In case you did NOT receive CKPSMS brand plastic box, please issue amazon A TO Z claim to get FULL refund..
  • Box of 100 Groz-Beckert DBXK5 (Size 80/12) Commercial Embroidery Machine Needles.Only compatible for industrial embroidery sewing machines. The needle shank is round, rather than flat surface, which is not suitable for household embroidery machines..
  • A needle system is a group of needles made to fit specific sewing machines. All needles in a system are of the same length and shank size, but are of various diameters. Lower size numbers are narrower or thinner needles used for lighter materials. Higher size numbers indicate a needle of thicker diameter, used for heavier materials. Match your needle system to your machine, then the size of the needle to the product you are sewing..
  • Groz-Beckert DBXK5 needles are available in following sizes, please select your size : Size 65/9 Size 70/10 Size 75/11 Size 80/12 Size 90/14 Size 100/16.
  • This needle is round at the shank and are normally used on industrial embroidery machines. This is a very common needle system Compatible with many Industrial Embroidery machines including Barudan, Brother, SWF, Tajima and many other industrial embroidery machines..
Check Stock

GROZ-BECKERT Needle in CKPSMS Clear Plastic Box- 100 Groz Beckert DBXK5 Industrial Embroidery Sewing Machine Needles Compatible with Tajima Barudan SWF (Size 75/11)

  • IMPORTANT: In case you did NOT receive CKPSMS brand plastic box, please issue amazon A TO Z claim to get FULL refund..
  • Box of 100 Groz-Beckert DBXK5 (Size 75/11) Commercial Embroidery Machine Needles.Only compatible for industrial embroidery sewing machines. The needle shank is round, rather than flat surface, which is not suitable for household embroidery machines..
  • A needle system is a group of needles made to fit specific sewing machines. All needles in a system are of the same length and shank size, but are of various diameters. Lower size numbers are narrower or thinner needles used for lighter materials. Higher size numbers indicate a needle of thicker diameter, used for heavier materials. Match your needle system to your machine, then the size of the needle to the product you are sewing..
  • Groz-Beckert DBXK5 needles are available in following sizes, please select your size : Size 65/9 Size 70/10 Size 75/11 Size 80/12 Size 90/14 Size 100/16.
  • This needle is round at the shank and are normally used on industrial embroidery machines. This is a very common needle system Compatible with many Industrial Embroidery machines including Barudan, Brother, SWF, Tajima and many other industrial embroidery machines..
Check Stock

Bore Brush Bronze Bore Brush Bore Cleaning Brush Set Wire Bore Brush Set Stainless Steel Cleaning Brush for Power Drill Impact Driver 12 Pieces,Multi Sizes

  • What will receive: there are stainless steel cleaning brushes and brass cleaning brushes with different sizes, all of them have 1/4 inch hex shank,....
  • Scientific design: bore brush offers easy access into narrow holes and confined areas, designed for use on right angle grinders.
  • Quality material: bore cleaning brushes are made of stainless steel and brass copper, strong and sturdy, can clean rust and detail completely.
  • Specification details: the drill wire brush is 1/4 inch hex shank fits for power drills, impact drivers, die grinders, the overall length is 4-3/4....
  • Multiple application: you can keep wire bore brushes in your car, garage, office and kitchen, and the bore brushes are suitable for cleaning,....
Check Stock

Herco Heavy Duty Rubber Steel Toe Hip Waders - Men s Size 14 Black

  • Heavy-duty hip boots are ruggedly made for all-weather warmth and comfort..
  • Hip-high water protection for fishing, hunting , outdoor sports and industrial use..
  • All rubber construction and are fully lined. Deep lugged sole for traction..
  • Integral steel safety toes meet ANSI Z41 PT 91 Class 75 standards..
  • Sturdily molded rubber boot has a built-in steel shank and cushioned innersoles..
Check Stock

Dremel 932 Aluminium Oxide Grinding Stone

  • A high-quality industrial abrasive made for extended use.
  • features a 1/8" shank, and is ideal for sharpening, deburring and general purpose grinding.
  • Tough enough to smooth out most materials— including stainless steel.
  • Specially designed to grind flat and slotted surfaces.
  • Can be cleaned and restored to its original shape after extended use, longer tool life, and more efficient grinding.
Check Stock

FivePears Tungsten Carbide Router Bits - 12 Piece Router Bit Set with 1/2-Inch Shank for Doors,Tables,Shelves,Cabinets,DIY Woodwork

  • ★ HIGH QUALITY : the router bit set (1/2" shank) is constructed with C3 hard tungsten steel and 45# carbon steel for durability..
  • ★ MULTI-FUNCTIONAL BIT SET : 12pcs/set (1/2" shank) included,different cutter types, work out a different effect. It is perfect for woodworking, edging, trimming, grooving, veining wood projects, and ideal for carpenters and hobbyists of all experience levels..
  • ★ EASY TO STORE : included wooden case,sturdy and makes storing the high-quality router bits convenient while in-between jobs or home improvement DIY projects. The case also helps protect the bits while traveling to work or remote site locations.
  • ★ WIDELY APPLICATION : suit for chipboard, MDF board, hardwood,softwood etc., and mainly used in router Table,kitchen,bathroom,cabinets,doors,shelves,DIY woodwork and industrial carpenters.
  • ★ SATISFACTION GUARANTEED – Fivepears is committed to providing consumers with the absolute best price and value on our entire line of products..
Check Stock

28mm Dia 60-Degree Silver HSS Double-edged Dovetail Tool Metalworking End Mill 12 Flutes

  • HSS material, durable and long service life..
  • Blade diameter: 30mm/1.18" , Shank Diameter: 16mm/0.63".
  • Safety instructions: Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed. The bladed product is not use for people under 18 years. The item is only use for industrial slitting/engraving, not hazardous article..
  • It is double-edged with regualr distribution,10 flutes making the the slitting stable..
  • It fits for meatalworking mold steel, cast iron, carbon steel, alloy steel, tool steel, general iron material..
Check Stock

Professional Domestic Sewing Machine Sewing Foot Presser Foot Presser Feet Set for Singer, Brother, Janome, Babylock, Elna,Toyota,New Home,Simplicity and Low Shank Sewing Machines (32 Pcs)

  • * Various Presser Feet-32 PCS Presser Feet, Very Functional for All Your Sewing Needs. Compatible with Most Sewing Machine Brands,Such As Singer, Brother, Janome, Kenmore, White And Other Low-Shank Domestic Sewing Machines, NOT Suitable for Industrial and MINI Sewing Machines.
  • * High Quality-Fits Most Sewing Machine Brands,Such As Singer, Brother, Janome, Kenmore, White And Other Low-Shank Domestic Sewing Machines, NOT Suitable for Industrial and MINI Sewing Machines.If you want to confirm whether your sewing machine is a low shank machine or not,find the thumb screw that holds the foot on the machine. Measure the distance from the center of the screw to the floor plate. If it measures 1/2 inch you have a low shank machine.
  • * Excellent design-Fits most Home Domestic Sewing Machines Built after 1980 that Have a Low-shank System.Useful Gift for Yourself or Anyone who Sews.
  • * Multiple Use-Use them as a Fashion Accent on Blouses and Dresses, As Border for Sheer curtains, or As a Flounce for Bedspreads, Skirts, etc.
  • * 100% MANUFACTURER MONEY BACK GUARANTEE：90 Days for a No-Question-Asked Refund,1 Year Warranty and Lifetime Support Guarantee.
Check Stock

Ranger 36" Heavy-Duty Men's Full Rubber Hip Boots with Steel Toe, Black & Yellow (T112)

  • Durable, flexible, industrial weight rubber is hand-laid and vulcanized at high heat for 100% waterproof construction.
  • ozone-resistant to prevent cracks and remain flexible in cold weather.
  • FOOT FORM contoured insole and steel shank provide proper cushioning and arch support to fight foot and leg fatigue.
  • Heavy-duty TracTread outsole and heel for improved grip and traction on slippery surfaces and rough terrain.
  • tough but soft fabric lining for easy on/off.
  • SAFE-TOE steel toe protects against impacts from above.
  • ASTM F2413-11 M I/75 C/75 EH and CAN/CSA Z195-05 Grade 1.
  • adjustable belt strap stays tight for a secure fit.
  • Recommended use: construction, mining, oil & gas, manufacturing, food processing, farm & equestrian, general industrial use.
Check Stock