Best Industrial Threaded Rod

Boltmaster 11002 8/32 X 12 Threaded Rod NC Zinc Pack of 10

• Zinc plated. Steel Threaded Rod The most economical and most common form of steelworks threaded rod..
• Should not be welded. Typically used by the plumbing and contracting trades..
• Threaded steel rod. Used in maintenance departments in various applications..
• Coarse threaded. Threaded steel rod coarse style steel rod Should not be welded..
• High Quality, provides great strength and protection against corrosion to make these machine nuts last!.

SMALLRIG 12 Inches (30 cm) Aluminum Alloy 15mm Rod with M12 Female Thread, Pack of 2 1053

• DIAMETERThe diameter of the rods is industrial 15mm standard.
• INNER THREADM12 inner thread on each end of a rod, so that you can 1) use M12 threaded connector (SMALLRIG 900) to lengthen the rod 2) use M12 rod end cap (SMALLRIG 1617) to prevent your accessories sliding from rods.
• COMPATIBILITYMainly used on camera riser system and filmmaking accessories, such as matte box, follow focus, lens support, etc..
• HIGH QUALITYMade of 601 aluminum alloy, well finished and precise CNC processing, sturdy and durable.

uxcell M4 x 60mm 304 Stainless Steel Fully Threaded Rod Bar Studs Hardware 10 Pcs

• 【DIAMETER】The diameter of the rods is industrial 15mm standard.
• 【INNER THREAD】M12 inner thread on each end of a rod, so that you can 1) use M12 threaded connector (SMALLRIG 900) to lengthen the rod 2) use M12....
• 【COMPATIBILITY】Mainly used on camera riser system and filmmaking accessories, such as matte box, follow focus, lens support, etc..
• 【HIGH QUALITY】Made of 601 aluminum alloy, well finished and precise CNC processing, sturdy and durable.

The Hillman Group 2200 5/16-18-Inch Coupling Nut Zinc 10-Pack

The Hillman Group 4374 5/16-24 Hex Coupling Nut Fine Thread,Pack of 5

• Commonly used in industrial applications.
• Included variants run #10-32 to 3/4"-16 in fine thread size.
• Zinc finish for improved corrosion resistance.

SLIIMU Self Centering Dowel Jig Kit for Max 6.8” Thick Timber, Inch Woodworking Center Doweling Drill Guide Jig for Straight Hole, Portable Drill Block for Wood Dowel Hole with 6 Drill Sleeve

• HIGH-QUALITY MATERIALS: The splints on both sides are made of industrial-grade aluminum alloy, which has high strength and strong durability.
• Anodized orange surface, keep excellent finish, corrosion resistance.
• the drilling guide center is made of high-quality steel, which has been quenched, and has good toughness..
• MULTIPLE SIZE DRILLING HOLES: The set provides six hardened steel threaded sleeves, two for each of 1/4”, 5/16” and 3/8”, and the fixed guide holes on the fixture are 7/16” and 1/2”..
• PRECISE POSITIONING: The steel drilling guide center is fixed in the middle of the locking threaded rod. By rotating the locking threaded rod, the aluminum alloy splints on both sides can be gathered or separated at the same time, realizing the accurate self-centering function. TIPS: After repeated use, if there is a small deviation, you can refer to the error adjustment method described below to make appropriate adjustments..
• WHAT WILL YOU GET? Self Centering Dowelling Jig Plus x 1, 1/4” Drill Sleeve x 2, 5/16” Drill Sleeve x 2, 3/8” Drill Sleeve x 2, “L” Type Wrench x 2. TIPS: If you have any questions, just feel free to contact us for help..

VIVOHOME 45mm Portable Spinning Dance Stripping Pole for Home Fitness Black

• PREMIUM MATERIAL - Made of premium chrome steel material that is durable and resists rust and corrosion.
• The seamless surface is extremely smooth so you will not get scratched or hurt when using it.
• User-friendly design allows you to use it for daily workouts.
• ADJUSTABLE HEIGHT - A threaded rod is built into the main pole.
• Simply insert the fixing rod and rotate it into place.
• The threaded rod allows you to extend or contract the pole to fit it into any space.
• Also comes with 2 extension poles to extend the length from 88” to 108”.
• 2 USING MODES - There are 2 different modes (static mode/ spinning mode) designed to meet your different needs.
• Simply use a Hex key to tighten the pole and keep it from spinning.
• Easy to choose the suitable style that works for you.
• WIDE APPLICATIONS - A perfect assistant for pole dancing.
• Suitable for dancers, athletes, and someone who is trying to get a workout.
• Great for gyms, yoga rooms, bars, clubs, or your home.

JWL 1 Cane Walking Stick Handle Shift Knob Ball Style Cast Aluminum with Threaded Rod Connector

• Cast Polished Aluminum Ball Handle with threaded rod connector provided.
• Very Strong Cast Aluminum material tapped to receive threaded rod.
• 3/8" x 16 threaded rod 2" long connector to attach handle to cane shaft.
• 2 1/4" high by 1 1/2" in diameter & 15/16" where base meets the shaft.
• Base at connection point is about 15/16" to 1 " diameter.

uxcell M6 x 250mm Fully Threaded Rod, 304 Stainless Steel, Right Hand Threads

• Fully threaded rods are widely applied in many occasions..
• Used for assembly fastening, screw into threaded nuts or tapped holes..
• 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..

LABOR SAVING DEVICES 81-000 Creep-Zit Fiberglass Wire Running Kit green

• Pro 36ft kit, threaded connector wire running rod.
• 1 luminous Fiber Fuse 6ft push/pull rod with male & female threaded connector ends.
• 5 Fiber Fuse 6ft push/pull rods with male & female threaded connector ends.

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

• EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
• Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
• SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
• Our strut compressor features detent pins that keeps the strut spring in place during compression.
• Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
• STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
• Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
• WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
• Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
• WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
• Attach the threaded rods so that the hooks are set 180° apart.
• Evenly compress both sides of the strut spring compression tool.

TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor

• 【 3/4" INCH ELBOW TEE COMBO PACK 】Our industrial pipe fittings 3/4 malleable iron threaded elbow/tee combo/pipe flange pack provides you the great floor flange pipe fittings at a reasonable price. Malleable cast iron pipe fittings can decorate your home or store more elegant and functional..
• 【 PIPE INDUSTRIAL DECOR 】You can use these black malleable pipe fittings to install durable iron frame for your pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, wall lamp or other industrial home decors. When you prefer an industrial, steampunk, vintage, retro, factory look, our decorative black pipe fittings are the way to go. Threaded pipe fittings are built to fit your household with an industrial, rustic style. Our black steel pipe fittings will definitely satisfy you..
• 【 EASY TO INSTALL 】These metal cast pipe fittings are threaded, just screw the threaded rods or pipes to the tees and elbows and they will hold forever. No screws needed to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
• 【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of bl....

10Pcs M8 x 250mm 304 Stainless Steel Fully Threaded Rods, Threaded Rods Bar Studs, Right Hand Thread Long Threaded Screw, M8-1.25 Thread Pitch, Fits for Anchor Bolts, Hangers, U-Bolts (5/16\ x 10\)

• 【Quality Material】These m8 threaded rod made of 304 stainless steel, which provides excellent corrosion resistance and anti-rust ability for long service life.
• 【Package Content】You will get valued 10 pack of 8mm x 250mm threaded rods.
• The fully threaded rods & studs can be drilled, cut, heated and shaped.
• 【All Threaded Rods】Our stainless steel thread rod can be used for assembly fastening, screw into threaded nuts or tapped holes, cut to your desired length.
• 【Wide Application】These 5/16 x 10 inches threaded rods are suitable for a wide variety of applications, such as anchor bolt, clamps, hangers, U-bolts, weld projections, even model building and more projects.