Categories

Best Inequilateral Angle Steel

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

Westcott 7-Inch Goniometer Quick Angle Protractor Measuring Tool (GO-180)

  • 【Dimension】- Vernier Bevel Protractor.
  • Measure angle: 320 Degrees；Material: Tool Steel.
  • 【High Quality】- This product is made of high-quality tool steel, practical and durable. It is not easy to rust, easy to carry and easy to store..
  • 【Easy Operation】- Universal angle ruler consists of ruler body, 90° square ruler, cursor, brake, base ruler, straight ruler, card block etc.Easy to operate and versatile, very practical..
  • 【Design】- 0-320 Measurement Angle.This universal bevel protractor is used to measure precise angle or angle measurements inside and outside the scriber. Measuring range is 0-320 degrees, easy to use..
  • 【Practicality】- Perfect for construction jobs, cabinet-making and fine carpentry, where a standard protractor or t-bevel won't fit.It is suitable for measuring tools of precise workpiece angle..
Check Stock

Proster 200mm 360°Angle Finder Data Hold LCD Angle Ruler One Key Zeroing 80mm 3 1/8\ Magnetic Height Gauge Depth Gauge for Woodworking Construction Home Decoration

  • 【Accurate Angle Finder】200mm stainless steel ruler to measure length (metric and imperial), 360°angle sensor for relative and absolute angle measurement inside and outside, Range:0-360°,Resolution：0.05°,Accuracy：±0.3°,Repeatability：0.05°..
  • 【One-key Data Hold & Zero Reseting】Knob locked one-key data hold function for both angle/depth gauge to hold the angles/depth measured at any time.
  • Zeroing reset button at any angle for relative measuring..
  • 【Multi-function Magnetic Height Gauge】3-In-1 Height/Depth/Thickness Gauge,easy to measure bore/slot depths with plunger, one key mm/inch/fraction switch, range: 80mm, resolution: 0.05mm, accuracy: 0.10mm for routers horizontal/vertical measure with self standing magnetic feet..
  • 【LCD Display & Stainless Steel】Sturdy plastic thickness gauge for with quick-reading digital LCD display, harden stainless steel angle finder ruler and depth ruler provides lifelong service..
  • 【Wide Applicatoion】This angle finder with magnetic height depth thickness gauge is especially designed for Woodworking, Construction, Home Decoration, Table saws, Hand Routers, Etc..
Check Stock

Angle Grinder Fixed Holder,Multifunctional Universal Desktop Angle Grinder Stand,Cutting Machine Table Saw Pull Rod Angle Grinding Machine Bracket for 100/115/125mm

  • 【Exquisite Workmanship】--The angle grinder holder is of good quality and exquisite workmanship. It is very suitable for installing angle grinders. It is easy to operate and easy to use. It is cut into a stainless steel ceiling with a 45-degree angle, which is light and convenient. Shelf, multi-purpose machine!.
  • 【Outstanding Performance】-- Upgrade and widen the clamping distance, the maximum clamping distance is 150mm. The maximum clamping angle of the clamp can reach 45 degrees, the maximum clamping is 80mm. Maximum cutting depth is 30mm..
  • 【Smooth Operation】--Angle Grinder Holder sliding cutting, stable operation, large cutting range, the maximum clamping angle of the clamp can reach 45°, and the maximum clamping length is 8cm. Compared with vise and freehand cutting, our bracket is much better.
  • 【Lightweight Workbench】--This is a lightweight workbench, very suitable for the lightest grinder on the market. You want to reduce the damage of the bracket and/or the grinding wheel by not pressing hard when cutting..
  • 【Thickened Steel Base】--Compared with other steel bases of angle grinder brackets, our base is thicker and more stable. For the cutting of general objects, there will be basically no big shaking, but if you cut super long Objec....
Check Stock

Neoteck Digital Angle Finder Ruler 8 inch/200mm Stainless Steel Digital Protractor with Data Hold Function and Zeroing Resetting LCD Display Electronic Spirit Level Gauge Ruler

  • 【Stainless Steel Angle Finder Ruler】 Digital LCD display for Easy Reading.
  • High Accuracy ±0.3°, Resolution 0.05°.
  • 【Data Hold Function】Pressing HOLD Button to Hold the Angles Values in Any Times, Operate Conveniently.
  • 【ON/OFF/ZERO Button】Short Press: Turn on/ Zeroing Resetting at Any Angle.
  • 【Multi-functional Design】 Combined with Stainless Steel Ruler and Angle Sensor, Measuring Angle and Length.
  • Hinge Mechanism on the Angle Ruler Allows Full 360-degrees to Measure Inside and Outside.
  • 【Smart Angle Finder Ruler】Come with a 3V CR2032 Battery, Automatically Shut Down after 6 Minutes of Inactivity.
Check Stock

GemRed Digital Angle Finder Tool, 2 in 1 Angle Gauge, Stainless Steel 7inch/200mm Digital Protractor for Woodworking/Carpenter/Construction/DIY Tools (Battery Included) …

  • 【Accurate Data】 The GemRed digital angle finder applies world's first Capacitance Displacement Transducer patented technology, to ensure the accuracy of data up to ±0.3°. Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles..
  • 【Simple & Easy Used】 ☆The Angle Finder Tool both measure the angle and length, metric and inch display. Calculating quickly and accurately, avoid tedious calculations, never guess or eye ball the angle and length again with one convenient tool. ☆The angle gauge with large LCD display, read clearly. ☆Also easily operate with only 2 bottons.(The red and white buttons make the function distinction clearer and more convenient.).
  • 【Humanized Detail Design】 ☆Locking Function: For read it easily, GemRed digital protractor could be locked at any angle. ☆Specially treated matte stainless steel ruler body: The ruler body does not reflect light, each Angle can be clear reading ☆Bigger and bolder type of the ruler: Sharper reading..
  • 【Durable & Long Battery Life】 This digital protractor has been adopted high quality stainless steel ensures the durability of the product. Large capacity standby with automatic power-off function can work more than 2000 h....
Check Stock

Marine VHF Antenna Mounts, Adjustable Base VHF Antenna Mount for Boat, 316 Stainless Steel, Heavy Duty, Include Installation Accessories Screws

  • 【Dual Swiveling Ratchet Design】Dual swiveling ratchet design, the marine VHF antenna mounts have two adjustable ratchets that can be easy to adjust mounting on slanted or level surfaces..
  • 【Easy for installation】Upper ratchet: When the handle is set upright, you can adjust upper ratchet, it has an adjustable angle of 270 degrees. Once you have determined the angle you want, pull the handle down to hold it in place. Lower ratchet: First, you loosen the screw in lower ratchet and you can adjust it to the angle you want. The lower ratchet has an adjustable angle of 180 degrees. Finally, you have determined the angle you want, tighten the screws in lower ratchet..
  • 【Packaging】: 1x Marine VHF Antenna Mount,4x Screws,4 xBolts,4x Nuts . We provide screws for you to install. You can choose the screws according to your actual situation. (Screws are made of 316 stainless steel). Before delivery, we will carefully check each product to ensure the quality of our products, make sure that there will be no deformation and fading will occur. Please feel free to buy it. If there is any problem, please contact us, and we will try our best to solve your problem..
Check Stock

EZ Shed 70187 Peak Style Instant Framing Kit

  • EASY-TO-FOLLOW-PLANS INCLUDED. Materials lists, cut lists, and detailed instructions with step-by-step images creates a 7’W x 8’L Shed..
  • Construct with wood or composite 2×4’s. Add your own roofing and siding to match your home..
  • Galvanized Steel Base and Angle Brackets won’t rust or rot.
  • Includes 24 Steel Angles, 12 Steel Base Plates and plans for 3 sizes. (additional kits required for larger sizes).
  • Only straight, 90 degree cuts are required. No miters or complex measurements are needed. Galvanized angle brackets create the perfect angle every time..
Check Stock

General Tools 444 Depth/Angle Gage

  • This easy-to-use depth and angle gage allows you to accurately measure and mark the outside, inside and sloped angles of a surface.
  • The hardened steel base is grooved on both sides to deliver accurate angles.
  • Permits easy setting of the protractor angle to 30, 45 and 60 degree on both sides.
  • The rule can also be used as a depth gage for measuring small holes and slots.
  • Spring tension nut eases depth and anglemeasuring by securing rule in milled slot at a 90 degree angle to base.
  • This gage features a 6 inch by 1/4 inch etched stainless steel rule graduated in 32nds and 64ths with a 2-1/2 inch wide hardened steel base.
Check Stock

Digital Angle Finder Ruler, Preciva 7.5inch/200mm Digital Protractor Stainless Steel Angle Ruler with Large LCD Display and Zeroing/Locking/Reverse Functions (CR2032 Battery Included).

  • Stainless Steel Angle Finder Protractor - Digital LCD display for Easy Reading.
  • Angle Measuring Range: 0-360°, High Accuracy ±0.2°, Resolution 0.05°.
  • Reverse Reading & Data Hold Function - Pressing HOLD Button to Hold the Angles Values in Any Times, Operate Conveniently..
  • ZERO Button, Relative and Absolute Angle Measurement - Zeroing Resetting at Any Angle..
  • Multi-functional Design - Combined with Stainless Steel Ruler and Angle Sensor, Measuring Angle and Length..
  • Tips: To Save Power, It Will Automatically Shut Off after 6 Minutes of Inactivity.
  • When the numbers jumps, please replace new battery..
Check Stock

Cutting Wheel 4-1/2 Inch 100 PCS Cut Off Wheel 4.5"x.047"x7/8" Cutting Disc Ultra Thin Metal & Stainless Steel,Cutting Wheel Fits Angle Grinder Saw Grinder Metal Cut Tools

  • FITS ANY ANGLE GRINDER ：Grinder blades is 4.5"x.047"x7/8" total in 100 PCS.Fit for 4-1/2”Angle Grinders and compatible with All 4-1/2”Angle Grinders..
  • MULTIPLE UESES : Grinding Wheel are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals for aggressive cutting action.Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel.fast burr free cutting.
  • Package List:100Pcs 4 1/2 Inch Cut Off Wheel.
Check Stock