5mm 940nm LEDs Infrared Emitter and IR Receiver Diode for Arduino (Pack of 24pcs) EK8443
- BOJACK 5mm 940nm LED Infrared Emitter and IR Receiver Diode Kit..
- 10pcs 940nm Sender with Emitting Angle 45 Degrees, 10pcs VS1838B Receiver with Receive Angle 70 Degrees.
- Emitter Voltage: 1.2-1.5V,Receiver VS1838B Voltage:3V-5V, Through Hole DIP 2pins 5mmled LEDs Set Transmitter Lights.
- Strong structure, Corrosion resistance, High reliability, Low power consumption, Long service life..
- Used For:Electronic devices, Phototransistor, Communication equipment, IR beam sensors, Infrared Remote, DIY PCB Circuit, Arduino, Raspberry Pi, Hobby, Science Experiments,Breadboard.
Check StockWireless Driveway Alarm,Home Security Alarm,PIR Motion Sensor Alert System
- CERTIFIED: Wireless motion detectors certifid to R&TTE(CE) and FCCID(USA).
- LARGE DISTANCE ALARM: A wireless receiver chimes to alert you when a person or vehicle comes within 400 ft. range (the distance between the sensor and the receiver).
- POWERFUL PIR MOTION SENSOR: Powerful outdoor weather-proof infrared sensor detects motion and sends a signal to the indoor wireless receiver.
- PIR motion detector range approx.9m/29ft.
- FEATURE AND WIRELESS POWER SOURCE: 1) Sensor: Passive infrared (PIR) motion detector. Transmitter: 433MHz.
- Powered by: 1x 9V (E) (battery not included).
- Powered by: 3x 1.5V (C) (battery not included).
- EASY INSTALLATION: Wireless sensor and wireless receiver make you forget the cables, locate the item anywhere which is perfect for you (you can put the item on table or mounting it on wall as you like).
- Easy installation, mounting hardware included (3 screws + 3 plugs).
Check StockKCMYTONER Wireless Infrared Doorbell Welcome Chime Kit - 1 PIR Motion Door Alarm Sensor,1 Receiver (Range at 918ft 36 Chime Melodies) Store Home Security Alert …
- ⭐ KCMYTONER motion sensor is a device that detects physical motion on a device or within an environment in real time, including a transmitter and a receiver. If transmitter detected any movement the receiver makes an audible and visual alert. Applicable to all kinds of shops, hotels,offices,factories,homes,etc.
- ⭐The Motion Sensor Alarm has a transmission range up to 280m/918ft in a open space (the distance from the sensors to the receiver). The detection range of the infrared sensor is approx. 2-8m/7-26ft to keep you always informed and safe..
- ⭐ Independent alarm horn,the motion alarm receiver with 4 levels of adjustable volume from 25dB to 110dB is available. You can easily adjust the suitable volume as your need, can effectively deter thieves..
- ⭐ Can maximum learning 32 wireless sensor accessories and 8 remote controllers..
- ⭐ Receiver host using AA battery(not included) or micro USB power supply, infrared curtain using AAA battery(not included) or micro USB power supply..
Check StockUB Protective Case for AirTag ,Flexible Soft Anti-Scratch Shockproof Full Body Air Tag ,Soft Silicone Tracker Holder with Key Chain, (Walli Robot)
- Ideal Choice: Infrared barrier detector is ideal for anti theft, alarms, devices and passage detectors, professional manufacturing, nice choice for your vehicle..
- Multiple Applications: Active infrared barrier passage sensor is widely used in vehicle gate system, access control system, security alarm system and so on..
- Stable and Reliable to Use: Infrared barrier alarm can enhance the detector's ability to resist RFI or EMI, protection, etc., and adapt to harsh environments..
- Basic Parameter: of active infrared radiation detector is about 100x35x40mm/3.94x1.38x1.57in, wavelength is 940nm, and the input power is DC or AC 12‑24V..
- Receiver Range: The receiver receiving distance is less than or equal to 15m/49.2ft, when there is severe weather such as heavy rain or fog, the distance will be shortened by 30%..
Check StockSeanme Driveway Alarm Wireless Outside Weatherproof, Outdoor Motion Sensor Alarm with 38 Chimes, 1 Receiver and 2 IP65 PIR Motion Detector, Waterproof, 328ft Transmission Range
- ...nt doors, window frames, driveways, walking paths, and anywhere in your home you want to be alerted to motion, also great to alert business owners that are working in the back, or out of sight, to customers entering their store..
- 【Easy, Fast, Wire-free Installation】The sensor can be mounted on the wall, the infrared sensor detects motion and sends a signal to the receiver. Bright LED indicators and a choice of 38 chimes allow you to customize your alerts..
- 【You can get】 1 receiver and 2 waterproof IP65 rated wireless infrared motion detectors. The detectors can be installed indoors and outdoors to monitor various locations in your home in all directions. If you have any questions, please feel free to contact seanme..
Check StockSeanme Upgrade Driveway Alarm Wireless Outside Weatherproof, Outdoor Motion Sensor Alarm with 38 Chimes, 1 Receiver and 2 IP65 Waterproof PIR Motion Detector, 328ft Long Range
- ...nt doors, window frames, driveways, walking paths, and anywhere in your home you want to be alerted to motion, also great to alert business owners that are working in the back, or out of sight, to customers entering their store..
- 【Easy, Fast, Wire-free Installation】The sensor can be mounted on the wall, the infrared sensor detects motion and sends a signal to the receiver. Bright LED indicators and a choice of 38 chimes allow you to customize your alerts..
- 【You can get】 1 receiver and 2 waterproof IP65 rated wireless infrared motion detectors. The detectors can be installed indoors and outdoors to monitor various locations in your home in all directions. If you have any questions, please feel free to contact seanme..
Check StockOriGlam Wii Sensor Bar USB Replacement - Works with Nintendo Wii / Wii U - Best SensorBar - Best For Vista, 7, 8
- Upgrade your wired Wii sensor bar to a wireless replacement. No need to add any cable to your wireless environment.
- Self installs with a flip of the on/off switch. Automatically switch to power saving mode to conserve battery power.
- Easy to set up and start playing out of the box. Works with Nintendo Wii / Wii U - Best SensorBar - Best For Vista, 7, 8.
- The USB sensor is a signal device that receives infrared rays specially designed for WII and WIIU game consoles. The USB receiver is equipped with double-sided adhesive on both sides of the bottom, which can be fixed above or below the display device and connected to the Wii/wiiu host through the interface..
- There are six infrared light-emitting diodes on the receiver, which can emit infrared, allowing the infrared sensor on the right handle of the Wii to recognize and perceive its location and distance, so as to achieve the purpose of grasping the player's movements. Up to four handles can be connected for four Players play at the same time..
Check StockInfrared Repeater System IR Repeater Kit Control Up to 10 Devices Hidden IR System Infrared Remote Control Extender Kit
- Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 10 devices - Expandable to 12 devices.
- IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc.
- IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet.
- High sensitivity, Real time transmission without any delay with its high sensitivity sensor. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent. CFL friendly: this duafire unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments.
- Note: plasma displays emit IR frequencies ....
Check StockCable Matters Infrared Remote Extender Cable, IR Repeater Cable - 10 Feet
- IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV.
- Blue LED in IR Receiver bulb verifies the signal transmission.
- Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor.
- Route the infrared remote control extender cable out of sight with a wall mounted TV.
- Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
- Simple installation of this lightweight IR cable.
- Locate the IR Blaster near the source sensor to repeat the signal to the source.
- Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
- IR Tx and Rx cables have adhesive circles on the back for mounting.
- USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
- USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger.
- Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF).
- 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.
Check StockInfrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver 10FT
- {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
- {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
- {SIMPLE INSTALLATION} of this lightweight IR cable.
- Locate the IR Blaster near the source sensor to repeat the signal to the source.
- {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
- 180 degree IR Receiver angle provides plenty of leeway to get the....
- {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
- Connect to an HDTV USB port or to a USB wall charger(Tip:....
Check StockPWTAO Remote Control Chameleon Toy Realistic Animal Infrared RC Chameleon Fake Chameleon Toys Electric Toys Party Favors Party Supplies Halloween Pranks Joke for Kids Adults Gift
- Feature: LED Light, Simulation Modeling, Move Eyes, Predator Mode, Flick the Tail,Forward, Backward, Left, Right, Remote Control, Infrared Sensor, etc.
- High Frequency Infrared Receiver: The remote control chameleon has a high frequency infrared receiver on the back.
- Predator Mode:Press the predator button to stick out your tongue to prey.
- Good Quality Material: The structure of the remote control lizard body is made of safe and friendly materials, babies can play with peace of mind.
- Great Gift for Kids: This Remote Control Chameleon Toy is featuring meticulous skin texture, retractable tongue and flick the tail, this simulation chameleon toys will bring tons of fun to kids. It would be a great party favors party supplies Halloween pranks joke for kids adults as gift.
Check StockGone in 60 Seconds
- ➤Works with all 38-56kHz IR remote control and devices with an IR input port..
- ➤Low current drive, low power consumption, long launch distance, small size installed..
- ➤Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc..
- ➤Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control ..
Check StockProgressive Automations Joystick Switch Momentary - Two Directions - 10A
- ATTRIBUTES: This Infrared Sensor is a set of transmitter and receiver in one of the photoelectric sensor.
- ADJUSTABLE: A detection distance can be adjusted according to the requirements.
- PERFORMANCE: The Infrared Sensor has a detection distance, visible interference by small, easy to assemble, easy to use.
- APPLICATION: The Infrared Sensor Can be widely used in robot obstacle avoidance, line piece and many occasions.
- MULTIPURPOSE: The production line of automatic counting equipment goods.
Check Stock