Categories

Best Injection Blow Molding Machines

Edge Supply Plastic T Molding 3/4 inch X 25 ft Roll, Dove Gray Matte T Molding, Durable, flexible Dove Gray Matte T Trim for DIY, Table or Arcade Trim, High End Flexible Dove Gray Matte T Molding Trim

  • DOVE GRAY MATTE T MOLDING – this roll of premium quality T molding can be cut to your required size and used to trip multiple types of DIY projects, furniture, commercial pool tables, table-top games and arcade machines.
  • DURABLE AND FLEXIBLE REAL DOVE GRAY MATTE T-MOLDING – produced from tough, flexible Inner Core of Polyethylene that contours to curved surfaces, this T trim is durable and long-lasting. Made to slot into the edges of arcade machines and general DIY projects, this T molding fits securely and safely when inserted into the correct size slot.
  • SIZING INFORMATION – included in your purchase you will receive a roll of real Dove Gray Matte T molding with a width of 3/4 inches. The T Trim can be cut to size as required and a 1/6-inch slot is required for a good fit.
  • VERSATILE FLEXIBLE T MOLDING – our customers use this premium T molding for a wide range of uses including gaming and arcade machines, countertop edging, decorative edging, and shelf guarding – ideal for high traffic area’s where edges can get bumped into.
  • EASY FIT PLASTIC CORE T MOLDING – thanks to the strong durability of this Dove Gray Matte T molding, it can be easily applied to your surface using a rubber mallet. The center barb will be placed into the slot you....
Check Stock

Bonost 500Pcs Threaded Inserts Kit M2 M3 M4 M5 - Female Thread Heat Set Insert Brass Knurled Thread Insert Nuts for Plastic Injection Molding 3D Printing Metric

  • 【Designed for Injection Molding】: With deep & clear knurls, the threaded inserts will add enough strength to screw connections when inserted into plastic components. The softened plastic will flow into the knurl pattern and then harden to form a firm bond with the insert..
  • 【High-quality Material】: Made of premium brass material, our threaded insert for plastic has both aesthetics and high strength, which can be used for a long time. And the high thermal conductivity of brass thread inserts means faster heating and insertion into plastic parts..
  • 【How to Use】: Female thread knurled insert nuts are suitable for mounting into tapered holes by heating or for molding during injection molding. You can use a soldering iron to heat it up and then pressing it into the hole. It is easy to control and at a low cost..
  • 【Professional Insert Nuts Kit】: Various metric thread sizes available, including M2, M3, M4, and M5. Widely applied in laptop plastic housings, 3D printers, automotive, electrical injection molding, and more. And the every type of heat set inserts has an individual bag to prevent them from mixing in transit..
  • 【What You Get】: 500 pcs threaded inserts assortment kit, and customer friendly service. There are 15 different sizes to s....
Check Stock

RCH Hardware CH-S56-11S-BLK-10 |9 Gauge Decorative Solid Steel Standard Link Fixture Chain | 10 Foot Increments | Black Finish

  • EASY TO INSTALL - The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement..
  • FEATURES - High wear resistance, high temperature resistance, salt resistance, acid resistance and alkali resistance.Due to the small spacing, the operation is particularly quiet and the noise is low..
  • APPLICATION - Widely used in 3D printers, CNC machine tools, electronic equipment, fire fighting machinery, stone machinery, glass machinery, door and window machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses, etc..
  • FAST MOVING SPEED - Very suitable for short distance light bearing condition.
Check Stock

YIYITOOLS Dead Blow Hammer-45oz(3LB), Red and Black, Shockproof Design, No ReboundMallet Machinist Tools Unibody Molded Checkered Grip Spark and Rebound Resistant (YY-3-011)

  • The hammer head is equipped with steel balls, which is shock-proof design, no rebound percussion, and more comfortable to use.
  • Double percussion surface design, the hammer surface is flat, the percussion surface is not damaged.
  • The hammer head and the hammer handle are closely connected, and it is not easy to break and deform under heavy blow.
  • The whole adopts high-quality plastic injection molding, wear-resistant and durable, and long service life.
  • Suitable for exterior wall tile, interior floor, furniture decoration.
Check Stock

2xhome Set of 4 Stackable Mid Century Modern Clear Ghost Side Chairs Dining Room Victoria Transparent Crystal Polycarbonate Plastic Acrylic No Arms Molded Accent Living Desk Office Guest Small Space

  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some....
  • Set of 4 Victoria ghost chairs - Single mold injection.
  • Made from Polycarbonate (stronger than acrylic).
  • Arrives fully assembled, Stackable and UV Protected.
  • Ideal for indoor or outdoor, home and office use - Living Rooms, Dining Rooms, Bedrooms, Nurseries, Waiting Areas, Parties, Banquets, Wedding party,....
Check Stock

Plastic Drag Chain Cable Carrier Closed Type with End Connectors R38 18 x 18mm L1000mm for Electrical CNC Router Machines

  • External Size: 23x28mm(OuterH*OuterW)；Bending radius: R38.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

2xhome Louis Large Transparent Vanity Mid Century Ghost Chair, Clear

  • Made from crystal Clear transparent polycarbonate (stronger than acrylic).
  • Some assembly required, chair Back screws to seat with 2 Hex screws (included), stackable and UV protected.
  • Ideal for indoor or outdoor, home and office use - living rooms, dining rooms, bedrooms, nurseries, waiting areas, parties, banquets, wedding party, and matching with your dining table..
  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected. Also blue/purple hue appears on the chair but will fade out over time..
Check Stock

2xhome - Set of 4 (4 Chairs in Total!), Black, Victoria Style Ghost Side Chairs Dining Room Chairs - Victorian Accent Seat - Lounge No Arm Arms Armless Less Chairs

  • Set of 4 (4 chairs in total!), Victoria ghost chairs Black chairs - Single mold injection.
  • Made from Black polycarbonate (stronger than acrylic).
  • Arrives fully assembled, Stackable and UV Protected.
  • Ideal for indoor or outdoor, home and office use - Living Rooms, Dining Rooms, Bedrooms, Nurseries, Waiting Areas, Parties, Banquets, Wedding party, and matching with your dining table. Etc. Multiple colors available - Clear, Smoke, Black, White (Please see our others listing!)..
  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected..
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

Fielect Drag Chain Cable Carrier Open Type with End Connectors R100 35X100mm 1 Meter Plastic for Electrical CNC Router Machines Black 1Pcs

  • Internal Size:35mm x 100mm/1.37" X 3.9"(Inner H x Inner W).
  • 【Feature】- The appearance of this cable carrier chain is beautiful,and surface gloss.Reinforced nylon,low temperature resistance,wear resistance,corrosion resistance..
  • 【Change Size】- You could link the cables with each other to form one long length you need..
  • 【Application】- The drag chain has been widely used in CNC machine tools,electronic equipment,glass machinery,doors and windows machinery,injection molding machines,robots,automated warehouses and so on,play a traction and protection role..
  • 【Package Contents】- 1 x Cable Drag Chain..
Check Stock

2Pcs Drag Towing Chain Flexible Drag Chain Cable for Numerical Control Electronic Equipment Stone Machinery

  • Premium Quality: The drag chain can be coordinated with the moving parts of the machine tool machinery and equipment, which can exert safety protection and guidance capabilities, extend the service life of the protected cables, oil pipes, and air pipes, and reduce consumption..
  • Widely Applications: Widely used in CNC machine tools, three‑dimensional printers, electronic equipment, stone machinery, door and window machinery, injection molding machines, manipulators, overweight transportation equipment, automated warehouses, processing centers, automated machinery and equipment, etc..
  • Advantages: Can improve cables and tubing. Professional manufacturing, stable performance and high reliability, which has passed strict quality control, you can use it with confidence..
  • Product Brief: The messy distribution of trachea, neatly and regularly arranged together, can increase the overall artistic modeling effect of machine tool machinery and equipment..
  • Item type: Drag Chain, Material: Nylon, Color: As picture shown, Inner diameter: Approx. 10x10mm/0.4x0.4in, Rotation radius: Approx. 28mm/1.1in, Weight: Approx. 426g..
Check Stock

uxcell knurled Insert Nuts - 25Pcs 1/4\-20 Female Thread Brass Threaded Insert Embedment Nut for 3D Printer

  • [Thread Size] - Thread Diameter: 1/4"-20.
  • [Material] - Made of brass material, high hardness and durable. Provides good mechanical properties with increased corrosion and heat resistance.
  • [Feature] - It can be installed into a plastic matrix by ultrasound or heat during the injection molding process..
  • [Easy to Install] - The knurled insert nut has a guide, so no countersink is required. The surface is smooth, firm and even, and easy to install..
  • [Application] - Can be widely used in 3D printing injection molding to achieve tight fixation..
Check Stock

2xhome - Set of 4 Clear Dining Room Ghost Chairs Large Size Polycarbonate Plastic Modern Accent Side Chairs, Clear

  • Made from Durable UV Resistant Polycarbonate (Not Stackable).
  • Minimal Assembly Required, Chair Back Screws To Seat with 2 Hex Screws (included).
  • Ideal for Indoor or Outdoor Use - Home, Office, Parties, Banquets, Weddings, and Matching with Your Dining Table.
  • Single injection molding will have molding line and injection point at some spots. Due to the glossy finish of the clear chair, you may notice some swirls. Slight blue/purple hue may appear on the chair but will fade out over time..
Check Stock