Tie Down Engineering Dock Hardware - Angle Brackets/Clip

  • The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
  • Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
  • Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
  • Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
  • Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.
Check Stock

Acerbis Full Plastic Kit Black for KTM 450 SX-F 2016-2018

  • 1.Injection Mold Fairing Fit for HONDA 2005 2006 CBR600RR.
  • 2.Package includes: front nose+ both sides fairings+ front fender+ tail fairings+ full tank cover+ rear seat cowl+ black unpainted inner pieces.
  • 4.Color: Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
  • Holes and tabs are built into the mold and align to Factory Settings.
Check Stock

uxcell R28 15mm x 30mm Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • External Size: 20x38mm(0.787x1.496 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R18 10mm x 20mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC

  • Internal Size: 10x20mm(0.394x0.787 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

2Pcs Drag Towing Chain Flexible Drag Chain Cable for Numerical Control Electronic Equipment Stone Machinery

  • Premium Quality: The drag chain can be coordinated with the moving parts of the machine tool machinery and equipment, which can exert safety protection and guidance capabilities, extend the service life of the protected cables, oil pipes, and air pipes, and reduce consumption..
  • Widely Applications: Widely used in CNC machine tools, three‑dimensional printers, electronic equipment, stone machinery, door and window machinery, injection molding machines, manipulators, overweight transportation equipment, automated warehouses, processing centers, automated machinery and equipment, etc..
  • Advantages: Can improve cables and tubing. Professional manufacturing, stable performance and high reliability, which has passed strict quality control, you can use it with confidence..
  • Product Brief: The messy distribution of trachea, neatly and regularly arranged together, can increase the overall artistic modeling effect of machine tool machinery and equipment..
  • Item type: Drag Chain, Material: Nylon, Color: As picture shown, Inner diameter: Approx. 10x10mm/0.4x0.4in, Rotation radius: Approx. 28mm/1.1in, Weight: Approx. 426g..
Check Stock

uxcell R28 15mm x 15mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC 1 Hole

  • External Size: 20x23mm(0.787x0.906 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

RCH Hardware CH-S56-11S-BLK-10 |9 Gauge Decorative Solid Steel Standard Link Fixture Chain | 10 Foot Increments | Black Finish

  • EASY TO INSTALL - The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement..
  • FEATURES - High wear resistance, high temperature resistance, salt resistance, acid resistance and alkali resistance.Due to the small spacing, the operation is particularly quiet and the noise is low..
  • APPLICATION - Widely used in 3D printers, CNC machine tools, electronic equipment, fire fighting machinery, stone machinery, glass machinery, door and window machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses, etc..
  • FAST MOVING SPEED - Very suitable for short distance light bearing condition.
Check Stock

New Silver Black Fairing Fit for YAMAHA 2002 2003 YZF R1 Injection Mold ABS Plastics Aftermarket Bodywork Bodyframe 02 03

  • 1.Injection Mold Fairing Fit for YAMAHA 2002 2003 YZF R1.
  • 2.Package includes: front nose+ both sides fairings+ front fender+ tail fairings+ black unpainted inner pieces.
  • 4.Color: Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
  • Holes and tabs are built into the mold and align to Factory Settings.
Check Stock

uxcell R28 15mm x 40mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x40mm(0.59x1.574 inch)(InnerH*InnerW).
  • External Size: 20x49mm(0.787x1.929 inch)(OuterH*OuterW).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R28 15mm x 20mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x20mm /0.59"x0.787" (InnerH*InnerW).
  • External Size: 20x28mm/0.787"x1.1"(OuterH*OuterW)Bending radius: R28.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

best_nj Soft Plastiс Mold Lure Making Injection Molds Fishing Lures Bandito Bug 4' (Two Cavity)

  • LUBRICATION: recommended, but can work without..
  • MOLD MATERIAL: artificial stone. Very durable, long lifetime, fully compatible with plastisol..
Check Stock

Plastic Drag Chain Cable Carrier Closed Type with End Connectors R38 18 x 18mm L1000mm for Electrical CNC Router Machines

  • External Size: 23x28mm(OuterH*OuterW);Bending radius: R38.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

New Glossy Silver Fairing Fit for Kawasaki Ninja 2007 2008 ZX6R 636 ZX-6R Injection Mold ABS Plastics Aftermarket Bodywork Bodyframe 07 08

  • 1.Injection Mold Fairing Fit for KAWASAKI Ninja 2007 2008 ZX6R 636.
  • 2.Package includes: front nose+ both sides fairings+ front fender+ tail fairings+ black unpainted inner pieces.
  • 4.Color: Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
  • Holes and tabs are built into the mold and align to Factory Settings.
Check Stock