Categories

Best Injection Mold die

Snaps Rivet Grommet Prong Eyelet Popper Fastener Self Cover Fabric Button Hand Press Machine Set

  • [Handpress Machine] Universal Hand Press Machine for grommets, snap buttons, rivets, fabric covered buttons.
  • [Snap Button Dies] 1 set of die for 10 mm 'S' spring press fasteners type VT2 (includes 4 pieces) 1 set of die for 12,5 mm 'S' spring press fasteners type T54 (includes 4 pieces) 1 set of die for 15 mm 'S' spring press fasteners type Alfa (includes 4 pieces) 1 set of 9.5mm Perforated prong snap button fastener button tool/die (includes 2 pieces).
  • [Rivet Dies] 1 set of 7mm Rivet Die/Mold (includes 2 pieces) 1 set of 9mm Rivet Die/Mold (includes 2 pieces).
  • [Grommet Eyelets Dies] 1 set of 5.4mm Grommet/Eyelet Die/Mold (includes 2 pieces) 1 set of 7.5mm Grommet/Eyelet Die/Mold (includes 2 pieces) 1 set of 9mm Inner Diameter Grommet/Eyelet Die/Mold (includes 2 pieces).
  • [Hole Puncher] 1 piece 2mm Hole Puncher 1 piece 4mm Hole Puncher 1 piece brass base for a hole cutter.
Check Stock

Acerbis Full Plastic Kit Black for KTM 450 SX-F 2016-2018

  • 1.Injection Mold Fairing Fit for HONDA 2005 2006 CBR600RR.
  • 2.Package includes: front nose+ both sides fairings+ front fender+ tail fairings+ full tank cover+ rear seat cowl+ black unpainted inner pieces.
  • 4.Color: Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
  • Holes and tabs are built into the mold and align to Factory Settings.
Check Stock

New Silver Black Fairing Fit for YAMAHA 2002 2003 YZF R1 Injection Mold ABS Plastics Aftermarket Bodywork Bodyframe 02 03

  • 1.Injection Mold Fairing Fit for YAMAHA 2002 2003 YZF R1.
  • 2.Package includes: front nose+ both sides fairings+ front fender+ tail fairings+ black unpainted inner pieces.
  • 4.Color: Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
  • Holes and tabs are built into the mold and align to Factory Settings.
Check Stock

best_nj Soft Plastiс Mold Lure Making Injection Molds Fishing Lures Bandito Bug 4' (Two Cavity)

  • LUBRICATION: recommended, but can work without..
  • MOLD MATERIAL: artificial stone. Very durable, long lifetime, fully compatible with plastisol..
Check Stock

New Glossy Silver Fairing Fit for Kawasaki Ninja 2007 2008 ZX6R 636 ZX-6R Injection Mold ABS Plastics Aftermarket Bodywork Bodyframe 07 08

  • 1.Injection Mold Fairing Fit for KAWASAKI Ninja 2007 2008 ZX6R 636.
  • 2.Package includes: front nose+ both sides fairings+ front fender+ tail fairings+ black unpainted inner pieces.
  • 4.Color: Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
  • Holes and tabs are built into the mold and align to Factory Settings.
Check Stock

NT Green Black Fairing Fit for Kawasaki Ninja 2007 2008 ZX6R ZX-6R Injection Mold ABS Plastics Aftermarket Bodywork Bodyframe 07 08 A018

  • 1.Injection Mold Fairing Fit for KAWASAKI Ninja 2007 2008 ZX6R.
  • 2.Package includes: front nose+ both sides fairings+ front fender+ tail fairings+ black unpainted inner pieces.
  • 4.Color: Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
  • Holes and tabs are built into the mold and align to Factory Settings.
Check Stock

NT White Black Fairing Fit for Kawasaki Ninja 2007 2008 ZX6R ZX-6R Injection Mold ABS Plastics Aftermarket Bodywork Bodyframe 07 08 A036

  • 1.Injection Mold Fairing Fit for KAWASAKI Ninja 2007 2008 ZX6R.
  • 2.Package includes: front nose+ both sides fairings+ front fender+ tail fairings+ rear seat cowl+ black unpainted inner pieces.
  • 4.Color: Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
  • Holes and tabs are built into the mold and align to Factory Settings.
Check Stock

NT Blue White Black Fairing Fit for YAMAHA 2003-2005 YZF R6 & 2006-2009 YZF R6S Injection Mold ABS Plastics New Bodywork Bodyframe A056

  • 1.Injection Mold Fairing Fit for YAMAHA 2003-2005 YZF R6 OR 2006-2009 YZF R6S (Please note: NOT Fit for 2006-2009 YZF R6, if you can not confirm please send us the picture of your bike before order.).
  • 2.Package includes: front nose+ both sides fairings+ front fender+ tail fairings+ black unpainted inner pieces.
  • 4.Color: Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
  • Holes and tabs are built into the mold and align to Factory Settings.
Check Stock

LYECUN Watch Press Set Back Case Closer, Watch Crystal Press, Watch Press Set, Watch Battery Replacement Tool

  • ..., it applies pressure by holding the top handle and turning it, allowing you to easily and flexibly control the pressure during operation, greatly reducing the risk of accidentally crushing the watch glass.
  • 【High Quality】: The watch press tool is made of all metal, the mold is ABS plastic, the net weight of a single watch press tool is 350 grams, it is sturdy and durable.
  • 【Wide Range of Adaptations】: This watch press set comes with 12 dies, including 10 double-sided dies and 2 special dies. Suitable for most sizes of the press-fit watch repair and battery replacement use.
  • Equipped with a cleaning cloth, put it between the watch glass surface and the mold before pressing to avoid scratching the glass.
  • 【Simple Operation】: 1. Select the appropriate size mold (please check the details page below for the specific selection method). 2. Place the mold and the watch in order, adjust the upper and lower balance, and ensure that there is no offset. 3. Slowly turn the rotary handle of the watch press tool and press the back cover of the watch.
Check Stock

Cuttlebug Cutting Plate B 6'X13'-

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting..
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

QWORK NPT Die Set, 6Pcs PVC Thread Maker Tool,Pipe Round Die Set, Pipe Threader Plumbing Tool, Three Maker Size: 1/2

  • Durable: Made of plastic and alloy, sturdy and durable..
  • Thread Mold Size: 1/2 inch, 3/4 inch, 1 inch.
  • Easy to Use: PVC plastic pipe die set, easy to install and use..
  • Package Content: Includes 3 x Thread Mold, 1 x Plastic Pipe Die, and 2 x Round Die..
Check Stock

Ice Cube Tray Easy Release,100 Pcs Ice Molds,2400 Ice Cubes,Food-Grade PE Material,Efficient Filling And Space-Saving,No Peculiar Smell Ice Mold

  • ★【FOOD-GRADE SAFETY MATERIAL】:Made from food-grade PE material, it is safe and odor-free. Each tray makes 24 ice cubes , this package can make 2400 ice cubes in total,make it ideal for cooling whiskey, tequila or other mixed drinks. Great for home use, parties and bars..
  • ★【EASY TO RELEASE ICE】:Each ice cube is separated by the ice mold, and the bag can be torn open for easy removal of the ice..
  • ★【EFFICIENT FILLING】:Place the funnel on the water injection hole, add water to the funnel, and place it in the freezer to get ice. Easy to operate and easy to use..
  • ★【LITTLE SPACE OCCUPATION】:These ice molds are easy to stack， they can neatly stacked in the refrigerator without sticking ..
  • ★【CREATIVE DESIGN】:disposable ice mold, creative self-styled design, no water leakage. The humanized water injection hole is convenient for water injection and convenient to use. Healthy PE resin material, no deformation, safe and environmentally friendly..
Check Stock

We-buys Cutting Dies C Plate Replacement Adapter Mat Clear 5.9'×7.6'

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting.Plate thickness is 3mm.
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock