Categories

Best Injector Puller

OTC 6779 Injector Puller for 2005-2011 GM Duramax Engines

  • OTC Injector Puller for GM Duramax engines - similar to Kent Moore J-46594.
  • For use on 2005-2011 model year GM Duramax 6.6L engines.
  • Safely pulls the injectors from the cylinder heads without pulling the injector cups.
  • Simply insert the tool into the injector retainer bracket bolt hole, attach a socket and ratchet/breaker bar to one of the hex ends and start rocking back and forth - the injector will pop right out.
  • Durable steel construction means tool will withstand heavy shop use and continue to perform as designed.
Check Stock

OTC 6778 Injector Puller for 2001-2004 GM Duramax Engines

  • OTC Injector Puller for GM Duramax engines - similar to Kent Moore J-44639.
  • For use on 2001-2004 model year GM Duramax 6.6L engines.
  • Safely pulls the injectors from the cylinder heads without pulling the injector cups.
  • Simply insert the tool into the injector retainer bracket bolt hole, attach a socket and ratchet/breaker bar to one of the hex ends and start rocking back and forth - the injector will pop right out.
  • Durable steel construction means tool will withstand heavy shop use and continue to perform as designed.
Check Stock

Engine Fuel Injector Removal Tool Puller for Land Rover Range Jaguar 5.0L V8

  • Injector Removal Tool Puller for Land Rover 5.0 3.0.
  • Easy Remove Fuel Injector: Usually, Injectors on vehicles are very tough to pull in general , but this tool could easy remove fuel injector, Improve efficiency, save a lot of time, it's possible to remove injectors from a Range Rover without it, is a must tool for remove fuel injector.
  • Application: This fuel injector remover tool compatible with Land Rover/Jaguar 3.0 5.0 petrol engine, fit for Jaguar X150, XK Series, X250(XF) and XJ models (V8 5.0lt petrol engines). fit for Land Rover Discovery 4, new Range Rover, Range Rover Sport (V8 5.0lt petrol engines), replace OEM 310-197.
  • Exceed OEM Design: Our fuel injector remove tool improved on the basis of OEM, our design more easy to use, give auto repair engineers a better experience.
  • Quality Guarante: This fuel injector remover tool made of high qualuty steel, high hardness and strong endurance to ensure that it is still intact after high-strength impact, and we offer lifetime warranty..
  • Tips: Before use, please tighten the nut at the end of the slider to prevent it from slipping off during use.Hold slight downward pressure on the locking clasp as u use the slide hammer to pop the injector free,that will get better results.
Check Stock

E-cowlboy 9U-6891 Injector Sleeve Remover Installer Set+9U-7227 Injector Height Tool+J-38587-a Engine Barring Socket for CAT Caterpillar 3406E C-15 C-16 Engines 8 PCS

  • Great Compatibility — Works on Caterpillar (CAT) 3406E / C-15 / C-16. Essential tool kit for engine operation to save your time and money!.
  • Superior Quality — Advanced precision machined out of aircraft grade billet aluminum and heavy duty steel process, durability, anti-corrosion and....
  • Benefits — Used to install and remove injector sleeves. Easily & Precisely adjust the Injector Height of the engine and easy to rotate the engine..
  • Include 8 Tools — 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller....
  • 100% Satisfaction Guarantee — If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months’....
Check Stock

Oni Tools CAT Injector Sleeve Cup Remover & Installer Set for Caterpillar 3406E C10 C12 C15 C16 C-18 Engine 9U-6891 OEM Replacement

  • Includes alternatives to 9U6877 Thrust Bearing, 9U7258 Driver Cap, 221-9778 Puller Stud, 4K-0367 Nut - Full, 5P-8247 Hard Washer and 128-7889 Puller....
  • Works on Caterpillar C-10, C-12, C-15, C-16, C-18 and 3406E engines. The new puller bridge can be used on all three engines..
  • This tool kit was design to install and remove fuel injector cups. Makes the removal process quick and easy..
  • Heavy duty steel process, anti-corrosion, high precision and hardness that provides a much longer service life..
  • Oni Tools ensures quality products and stands behind top of the line manufacturing. We guarantee our products to last and offer support along the way..
Check Stock

E-cowlboy 9U-6891 Injector Sleeve Cup Remover&Installer Set for CAT Caterpillar 3406E C10 C12 C15 C16 C-18 Engine Heavy Duty Steel 6 PCS

  • Great Compatibility — Works on Caterpillar (CAT) C-10,C-12,C-15,C-16,C-18 and 3406E Engines. (The new puller bridge can be used on all three....
  • Superior Quality — Advanced heavy duty steel process, durability, anti-corrosion, high precision and hardness to provide a much longer service life..
  • Benefits — Used to install and remove injector sleeves. Works in a easier way to save your time and money..
  • Includes 6 Tools — 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller....
  • 100% Satisfaction Guarantee — If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months’....
Check Stock

Manicar 9U-6891 Injector Sleeve Remover Installer Set+9U-7227 Injector Height Tool+J-38587-a Engine Barring Socket for CAT Caterpillar 3406E C-15 C-16 Engines 8 PCS

  • All can work on Caterpillar 3406E, C-15, C-16. ①And 9U-6891 is compatible with Caterpillar C10 C12 C15 C16 C18 3406E, ②9U-7227 Injector Height....
  • Advanced precision machined out of aircraft grade billet aluminum and heavy duty steel process, durability, anti-corrosion and anti-rust. High....
  • This kit is critical if you are servicing Caterpillar engines. Includes all the tools you will need for both removing & properly re-installing the....
  • Include 8 Tools — 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller....
  • This product can be purchased with a 12-month warranty. If you are not satisfied with this product, you will get a full refund as long as you return....
Check Stock

NEWTRY 50ML Continuous Livestock Syringe Semi Automatic Injector Adjustable Poultry Veterinary Gun Stainless Steel with 10 Needles for Horse Sheep Cattle

  • [Durable Design]---This injector adopts concealed spring design which reduces loss and prolongs service life. It also has super big capacity of 50ml..
  • [Universal Needle Interface]--- The front end can be connected with any standard needle, and has a needle protector, which is tightly connected and does not take off..
  • [Stainless Steel Tie Rod]--- Stainless steel puller is not rusty. It is durable. The body can be filled with 50ml liquid at a time..
  • [Ergonomic Design]---The syringe contains a large-handed wrench, which effectively reduces hand fatigue caused by long-term use and makes the operation easier..
  • [5 Levels Adjustable]--- Dose is adjustable, the minimum measurement is 1ml, the measurement is accurate, and there are 5 gears: IML2ML3ML4ML5ML..
Check Stock

HiSport Fuel Injector Seal Kits Include O-rings, Pintle Caps, Seal Spacers and Filter Baskets Universal Repair Set Replaces 0280150962 [8 Set]

  • [COMPATIBILITY] This fuel injector rebuild installation kits combination is a universal kit, compatible with the most commonly used injectors 0280150943 0280150955 0280150962.Compatible with Ford V8 5.4L 4.6L Fuel Injector Service Repair Kit Seals Pintle Caps Filters..
  • [PACKAGE INCLUDES] This fuel injector repair kits include 8 micro filters 101, 16 injector O-ring 203, 8 injector retaining pintle caps 308, 8 injector spacers and 8 injector seal..
  • Micro Filters CF101-( 6X3X12mm), Injectors O ring 203 -(7.5X3.5mm), Injector retaining pintle Cap 308 - 12X8X6.5mm, Injector spacers seal 307 - (12.6*8.4*2mm), Injector seal 302 - (13X11X1.3mm).
  • [QUALITY CONTROL] This fuel injector repair installation kits set is 100% testing during the manufacturing process. o rings are made by FKM VITON material, it resistants high temperature which more than 200 degrees. All Items tested for reliability, durability..
  • [SATISFACTION] HiSport ensures brand new and high-quality products. In terms of any problem with this product, please contact us, our friendly assistants will always be available to help you within 24 hours..
Check Stock

Fuel Injector Cleaner Machine & Tester, Ultrasonic Fuel Injector Cleaner & Injection for 4-Cylinder Vehicles, Leakage and Block Test for Gasoline Car & Motorcycle Injector Throttle Valve Spark Plug

  • ✪WHAT IS F100 FUEL INJECTION SYSTEMS CLEANERS - Autory F100 Fuel Injector Cleaner Machine is a professional 4 cylinders auto fuel injector testing cleaning machine. F100 Fuel Injector Cleaner Tester will help clean and test the fuel injectors of most of the gasoline cars and motorcycles.
  • ✪ULTRASONIC CLEANING - Autory F100 Fuel Injector Cleaner Kit works by sending an ultrasonic vibration signal to the injector nozzle through the pulse signal line, which makes the stubborn carbon deposit jitter strongly and removes more thoroughly.
  • ✪4 INJECTORS AT ONE TIME - Autory F100 Fuel Injector Cleaner Tool performs ultrasonic cleaning on single or multiple injectors simultaneously, 4 injectors can be tested and cleaned at one time. Plus, it can also be used on 6 cylinders, twice tests will do.
  • ✪REVERSE CLEANING & ON-VEHICLE CLEANING - F100 Injector Cleaner Machine supports reverse cleaning & on-vehicle cleaning, which can eliminate thoroughly blockages on the injector accessories and internal.
  • ✪ WIDE APPLICATION - Autory F100 Fuel System Tools comes standard with two sets of....
Check Stock

HiSport Fuel Injector Rebuild Service Kits for Universal EV1 Engines Injector O-Rings, Injector Spacers, Injector Retaining Pintle Caps, Injector Micro Basket Filters - 6 pcs/pack

  • [COMPATIBILITY] This fuel injector rebuild installation kits combination is a universal kit, compatible with the most commonly used injectors 0280150943 0280150955 0280150962..
  • [PACKAGE INCLUDES] This fuel injector repair kits include 6 micro filters 101, 12 injector O-ring 203, 6 injector retaining pintle caps 308, 6 injector spacers and 6 injector seal..
  • [INFORMATION] Micro Filters CF101-( 6X3X12mm), Injectors O ring 203 -(7.5X3.5mm), Injector retaining pintle Cap 308 - 12X8X6.5mm, Injector spacers seal 307 - (12.6*8.4*2mm), Injector seal 302 - (13X11X1.3mm).
  • [QUALITY CONTROL] This fuel injector repair installation kits set is 100% testing during the manufacturing process. o rings are made by FKM VITON material, it resistants high temperature which more than 200 degrees. All Items tested for reliability, durability..
  • [SATISFACTION] HiSport ensures brand new and high-quality products. In terms of any problem with this product, please contact us, our friendly assistants will always be available to help you within 24 hours..
Check Stock

Artisan Smoker Meat Injector Kit - Meat Injector Gun with BBQ Marinade Injector Syringe Stainless Steel Needles Siphon Extra O-Rings - Smoker or Grill Flavor Injector for Turkey Pork Brisket

  • BBQ LIKE A PRO with Artisan Smoker’s food syringe injector. Your pro-grade bbq meat injector gun that will add a juicy explosion of seasoning in....
  • DIAL IN FLAVOR injector for meat of all cuts. Has 3 bbq marinade injector flow settings for even distribution. Use as a turkey injector syringe, in....
  • COMFORTABLE, lightweight, portable bbq injector syringe pump with grip handles. Zero hand fatigue. The perfect meat injector kit for smoker fun with....
  • EASY TO CLEAN, dishwasher safe. Inject steak, lamb, blended up sauce or marinades. Dissemble meat injector syringe needles and siphon for cleaning.
  • THE VERY BEST food injector syringe kit. Made from safe durable plastic. Each 304 stainless steel meat injection needle is designed for deep....
Check Stock

New Injection Pump 6738-71-1520 4063844 Fit for Cummins 6BT5.9 Engine Zexel

  • Includes tools to remove fuel injector sleeves, clean the injector bore and fuel galley, and install injector sleeve cups.
  • With the head removed, the slide hammer adapter can be installed to pull the injector.
  • Brush set properly cleans the injector bore which is required for the fuel injector sleeve cup installer to properly seat the cup.
  • Applications include: 2006-2009 4. 5L Diesel, 2004-2010 6. 0L Diesel.
Check Stock