Categories

Best Injector Pump

PWACCS Adjustable Soap Chemical Injector for Pressure Washer, Downstream Injector for Power Washer, 3/8 Inch Quick Connect

  • Attention: Pressure washer chemical injector's working pressure is from 1000 to 3200 PSI. Flow rate: 1.5 GPM to 4 GPM. The presure which is higher than 3200 PSI will not work. Include chemical injector, 10 Feet tubing, filter and black soap nozzle..
  • Application: Downstream injector for pressure washer is used to siphon detergent out of separate container. The chemical runs after pump. So it allows for a wider choice of chemicals..
  • Chemical injector has standard 3/8’’ quick connect plug and 3/8’’ quick connect socket. Soap injector for pressure washer connects pressure washer pump to hose. Adjusts the dilution ratio of chemicals and water by metering valve..
  • Dilution ratio of chemical vs water can been adjusted by controlling metering valve. Ideal for most brands of gas and electric pressure washer. Suitable for cold and hot water pressure washer..
  • If the pressure washer chemical injector kit have any questions, please contact us at first time. We provide a service of quick reply within 24 hours..
Check Stock

Tool Daily Adjustable Soap Chemical Injector for Pressure Washer, 3/8 Inch Quick Connect

  • ATTENTION: Working pressure is 1000 to 2800 PSI. Flow rate is from 2 GPM to 5 GPM. 2800 PSI or higher will not work. Power washer chemical injector kit includes chemical injector, 10 Feet tubing, filter and black soap nozzle..
  • Application: Must Follow Manual to Set Up Chemical Injector. It is used to siphon detergent out of separate container. The chemical runs after pump. So it allows for a wider choice of chemicals..
  • Chemical injector has standard 3/8’’ quick connect fitting. It connects pressure washer pump to hose..
  • Dilution ratio of chemical vs water can been adjusted by controlling metering valve..
  • Works with most brands of gas and electric pressure washer. Suitable for cold and hot water pressure washer..
Check Stock

Artisan Smoker Meat Injector Kit - Meat Injector Gun with BBQ Marinade Injector Syringe Stainless Steel Needles Siphon Extra O-Rings - Smoker or Grill Flavor Injector for Turkey Pork Brisket

  • BBQ LIKE A PRO with Artisan Smoker’s food syringe injector. Your pro-grade bbq meat injector gun that will add a juicy explosion of seasoning in....
  • DIAL IN FLAVOR injector for meat of all cuts. Has 3 bbq marinade injector flow settings for even distribution. Use as a turkey injector syringe, in....
  • COMFORTABLE, lightweight, portable bbq injector syringe pump with grip handles. Zero hand fatigue. The perfect meat injector kit for smoker fun with....
  • EASY TO CLEAN, dishwasher safe. Inject steak, lamb, blended up sauce or marinades. Dissemble meat injector syringe needles and siphon for cleaning.
  • THE VERY BEST food injector syringe kit. Made from safe durable plastic. Each 304 stainless steel meat injection needle is designed for deep....
Check Stock

Pressure Washer Manifold Kit Fits for Briggs Stratton | OE Replacement 16031 190627GS 190574GS 020228, with 4 Bolt Power Pressure Washer Pumps

  • ...pressure washer pump can be inserted completely inside to make the pin more secure, the sturdy alloy casing helps protect the washer pump from damage, advanced manufacturing technology, high reliability and high performance, standard size, can be easily installed without leakage..
  • The Method of Installing a Chemical Injector: The tools that need to be prepared include a half-inch wire wrench or a half-inch sleeve, and a long and thin tool for penetrating into narrow places. Use a half-inch line wrench or socket to remove the old chemical syringe from the pump. Make sure that the spring and ball are removed from it and not left in the pump manifold. Install the O-ring and the inside, use a tool to install the O-ring into the internal groove of the injector..
  • Package List: 1 × chemical injector + 1 × inlet check valve + 4 × mounting bolts + 4 × mounting o-rings, please compare with your old high pressure washer manifold kit when you buy, and then buy it..
  • Customer Service: You will get 24-months service, hassle-free return and money back policy, buy with confidence! If you have any questions, please contact us by email, we will reply you within 12 hours..
Check Stock

Raincovo Chemical Injector Kit, Soap Injector for Pressure Washer, 1/8 Inch 27 Male BSP Thread

  • Chemical injector kit fits most pump which is an OEM brand. Replaces pump 203640GS 308452002, 190593GS and 190635GS..
  • Soap injector makes cleaning so much easier and faster. It’s a great replacement for the old rusted one..
  • The brass fitting is a 1/8 inch 27 male BSP thread. Install them and the soap dispenser works just like new..
  • How to install: Take the brass fitting, drop in the little ball, insert spring with small end against the ball, then attach it back on the pump. Do not over-tighten otherwise it will snap off..
  • Kit includes 2 pieces fittings, 2 pieces small balls, 2 pieces springs, 2 pieces o-rings outside and 4 pieces inside..
Check Stock

Raincovo Downstream Injector for Pressure Washer Power Washer Chemical Injector Kit Soap Injector 3/8 Inch Quick Connect 4000 PSI

  • Package: Kit Includes chemical injector, 10 feet siphon hose, filter, black nozzle soap with 1/4” quick connect and teflon tape..
  • Application: When detergent is sucked out separately, the chemical will not pass through the pump, you could use a variety of chemicals without....
  • Characteristic: Chemical injector kit with a metering valve, which can adjust dilution ratio of soap and water. Avoid clogging of the injector and....
  • Connector: Downstream Injector has 3/8 inch quick connect. Fits most electric and gas power washer..
  • Material: Siphon hose is made of high-quality PVC, used for hot and cold water. Adapter is made of brass and stainless steel. Max pressure is 4000....
Check Stock

Meat Injector Kit, Plastic Marinade Turkey BBQ 1-oz Syringe with 2 Stainless Steel Needles - 3 Extra O-Rings & 1 Cleaning Brush For Basting & Grilling

  • FOOD SAFE BBQ INJECTOR – Syringe barrel, handle and pump plate of this food injector made of BPA Free & Eco-friendly premium quality plastic material. While the needles and plunger rod are made of food grade stainless steel. It is safe for marinating/cooking and durable to serve for years..
  • ENRICHES THE TASTE OF TOUGH/THICK CUTS - Different size needles cover almost all of your marinade meat injector needs. The special designed needles for deep penetration and perfect sauce distribution either its liquid, thick or chunky throughout the meat so you can enjoy the juicy, yummy and saucy barbecue or Cajun brines till its last bite!.
  • MULTI-PURPOSE BBQ INJECTION KIT - Sharp Injecting needles of this bbq injector kit punctures any meat or poultry with ease, flavor your meat in seconds and penetrates deep to deliver optimum flavor throughout. This turkey injector is used for infusing flavor of meat, chicken, turkey, beef, goose, duck, lamb, briskets but also to inject hot chocolate, butter, cream or jelly into donuts or to sweeten your dessert..
  • FRIENDLY TO USE - Ergonomic handle of this flavor injector allows a comfortable grip and friendly pressure control. It is easy and quick to assemble. Easy to clean. Just wash in a sink or throw into dishwasher..
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

6.0 POWERSTROKE KC STAGE 2 TURBO (04-07)

  • ◭ [Vehicle Application] : Injector Pressure Regulator Valve with Socket 6.0L Powerstroke Diesel Engines Fits for Ford 6.0L V8 Diesel Turbocharged Vehicles - for 2004-2010 Ford E-350 E-450, for 2003-2010 Ford Excursion, for 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty..
  • ◭ [Manufacturer Part Number] : Direct replace factory part AP63417 1846057C1 5C3Z9C968CA 5C34-9C968-CA W3250216 CM5126 and HTV102 for a proper fit, Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035.
  • ◭ [Function] : Precisely manufactured internal valves high quality diaphragms and springs to perform excellently under all engine operating conditions. Replaces Injector Pressure Regulator Valve and regulates the oil bypass circuit of the high pressure oil pump, that opens and closes to allow high pressure oil into the injectors.This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus properly control the pressure in the high-pressure oil system..
  • ◭ [Material and Installation] : IPR Injector Pressure Regulator Valve, contructed of premium material for long lasting durability and reliability. Robu....
Check Stock

AEM (30-3302) V2 Water/Methanol Injection Kit with Internal MAP Sensor

  • Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid.
  • Pump does not cycle on/off and provides quiet, smooth operation.
  • it features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.
  • Precision-machined billet-aluminum injector with integral check valve.
  • three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min).
  • tank-less 35 PSI Boost dependent gas water/methanol system.
Check Stock

The Bundling Off L116T Light and 2m ac Adapter

  • 2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
  • Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6....
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
  • This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI.....
  • This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine....
Check Stock

3600 PSI Power Pressure Washer Water Pump 2.5 GPM 3/4 Shaft for Honda GX200

  • The ROP Shop replacement Horizontal Triplex Pressure Washer Pump.
  • Specs - Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM. Maximum HP: 6.5 HP, Male Outlet: 22mm Threaded, Standard....
  • Includes - (1) Horizontal Triplex Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Oil Reader.
  • This pump mounts horizontal and MUST have the oil dip stick pointing up when mounted. Pump needs at least 6.5HP to handle PSI. Pump head CANNOT be....
  • Replaces most pumps with 3/4" shaft. The 4-bolt mounting pattern is 2 9/16" center to center.
Check Stock

3000 PSI Pressure Washer Pump for Excell EXH2425 with Honda Engines

  • BRAND NEW OEM PRESSURE WASHER PUMP FOR 2800-3000 PSI UNITS.
  • Specs:2800-3000 PSI / 2.4 GPM – MAX 2.5 GPM FACTORY RATING, BRASS HEAD PUMP, INCLUDES THERMAL RELEASE VALVE, Chemical Injector. FITS 3/4″ SHAFT HOLE DISTANCES ARE 2 5/8″ CENTER TO CENTER ON OUTER HOLES / 1 7/8″ FROM CENTER SHAFT HOLE TO EACH OUTER HOLE..
  • **Fits Honda Excell units with 3/4″ shaft only!!! Some Excell units have the 7/8″ shaft and this pump will not work!**.
  • UNIVERSAL PUMP – FITS MANY MAKES AND MODELS! INCLUDES THERMAL RELEASE VALVE.
Check Stock