Best Injectors Oem

FICM Engine Fuel Injector Complete Wire Harness - Replaces Part 5C3Z9D930A, 5C3Z-9D930-A - Compatible with Ford Vehicles F250 F350 F450 F550 - Powerstroke 6.0L Diesel - 2003-2007

• Replacement Fuel Injector Control Module (FICM) Harness - This wire harness connects the fuel injectors on your 6.0 Powerstroke diesel engine to the FICM module. This is a complete wire harness with all connectors. If your truck is experiencing injection fault codes, idling or running rough your factory wiring may have a short or loose connection. Replace it and get you 6.0 Powerstroke running right..
• Compatible Replacement for Ford Vehicles - 2003, 2004, 2005, 2006, 2007 F250, F350, F450, F550 and Excursion with the 6.0 Powerstroke Diesel engine. Including model years 03, 04, 05, 06, 07..
• Replaces Part# - Replaces part number 5C3Z9D930A and 5C3Z-9D930-A - While this is a not a genuine OEM part, it is a direct replacement for the factory FICM injector wiring harness found on your F250, F350, F450, F550, or Excursion. Powerstroke 6.0 diesel Super Duty..
• OEM Fit, Quality, Finish - This FICM wiring harness features OEM connections for a perfect connection to the FICM and the diesel fuel injectors. High temperature wires are used throughout to insure longevity. The entire wire harness features a high temperature wire loom to product both the harness and pigtails from the heat in your F250, F350, F450, F550, or Excursion's engine bay..

Exergy Performance CP4.2 Inlet Metering Valve (FCA/MPROP) Fuel System Saver Improved Stock Inlet Metering Valve E05 10505 Compatible with 2011-2016 Chevy Silverado/GMC Sierra 6.6 LML Duramax Diesel

• The CP4 Pump is prone to failure if the fuel system has any water or contaminated fuel introduced to it. When the pump fails, it will send metal contaminants throughout the entire fuel system which in most cases will ruin the injectors and other sensors and cost you several thousand dollars..
• The System Saver Inlet Valve was designed to offer you peace of mind in the event of a CP4 Pump failure. The important difference between the OEM valve and the System Saver is the improvement made to the screen, which is upstream of the valve inlet. The OEM screen is a single 80 micron layer, and is a very flimsy design. In extreme cases the factory screen can actually tear, introducing massive amounts of debris (from the failed pump) into the injectors..
• The System Saver Valve screen is rated at 25 microns and is wrapped in two layers. This improved micron rating and double wrap construction will do a much better job of keeping debris from entering the rest of the fuel system. It is also constructed in a manor where it will not be able to tear or de-laminate from the filter housing..
• Another benefit to the screen is the fact that it will load up quicker than the factory screen in the event of a pump failure. This will choke off the valve sooner, which will br....

BIOBOR JF Diesel Fuel Additive Highly Effective Fuel Biocide Supplement Prevents Corrosion of Fuel Tanks Increases Lubricity Dual Phase Chemistry | 1 Gallon BBJUG01US

• KILLS & PREVENTS BACTERIA. Highly effective biocide to kill and prevent microbial growth in fuels and tanks (bacteria & fungi). Lubricates injectors....
• DUAL PHASE CHEMISTRY. Partitions both water and fuel phases for more effective and complete protection against microbes that cause contamination and....
• "EXTENDS FUEL FILTER LIFE. Excessive sludge accumulation, clogged fuel filters and expensive fuel polishing can shut down engines. Proactive use of a....
• INCREASES LUBRICITY. As an added benefit, BioborJF has been proven to increase the lubricity properties of jet fuel, providing additional protection....
• OEM APPROVED. Proven to restore lubricity levels, exceeding ASTM standards and protecting injectors and pumps from premature wear. (ASTM-D6079 HFRR-....

MOSTPLUS 8pcs Flow Matched Fuel Injectors Compatible for Ford 4.6 5.0 5.4 5.8 0280150943 822-12110

• OEM Part Number: 0280150956 0280150718 0280150943 822-11111, 0280150943 0280150556 0280150939 0280150909, F1ZE-C2A E6TE-A2B E5TE-A3B E6TE-A3B.
• Injector Design: Metal & composite plastic.
• Filter Design: Basket filter design at inlet.
• Specification: Coil Resistance: 12 Ohms / High Impedance Static.
• Please check your car information before purchase..
• Mostplus Fuel injectors already came with o-rings installed and lubed to make sure no possible tearing of o-rings when installing. Each injector are separate sealed, and have dust cap on both sides to keep it clear..

BIOBOR JF Diesel Fuel Additive Highly Effective Fuel Biocide Supplement Prevents Corrosion of Fuel Tanks Increases Lubricity Dual Phase Chemistry | 32 Ounce BB32EZ01US

• KILLS & PREVENTS BACTERIA. Highly effective biocide to kill and prevent microbial growth in fuels and tanks (bacteria & fungi). Lubricates injectors....
• DUAL PHASE CHEMISTRY. Partitions both water and fuel phases for more effective and complete protection against microbes that cause contamination and....
• EXTENDS FUEL FILTER LIFE. Excessive sludge accumulation, clogged fuel filters and expensive fuel polishing can shut down engines. Proactive use of a....
• INCREASES LUBRICITY. As an added benefit, BioborJF has been proven to increase the lubricity properties of jet fuel, providing additional protection....
• OEM APPROVED. Proven to restore lubricity levels, exceeding ASTM standards and protecting injectors and pumps from premature wear. (ASTM-D6079 HFRR-....

BIOBOR JF Diesel Fuel Additive Highly Effective Fuel Biocide Supplement Prevents Corrosion of Fuel Tanks Increases Lubricity Dual Phase Chemistry | 12 Pack - 16 Ounce BB16EZ12US

• KILLS & PREVENTS BACTERIA. Highly effective biocide to kill and prevent microbial growth in fuels and tanks (bacteria & fungi). Lubricates injectors....
• DUAL PHASE CHEMISTRY. Partitions both water and fuel phases for more effective and complete protection against microbes that cause contamination and....
• EXTENDS FUEL FILTER LIFE. Excessive sludge accumulation, clogged fuel filters and expensive fuel polishing can shut down engines. Proactive use of a....
• INCREASES LUBRICITY. As an added benefit, BioborJF has been proven to increase the lubricity properties of jet fuel, providing additional protection....
• OEM APPROVED. Proven to restore lubricity levels, exceeding ASTM standards and protecting injectors and pumps from premature wear. (ASTM-D6079 HFRR-....

Gumout 510015 Fuel System Treatment, 6 oz.

• Cleans fuel injectors, intake valves, carburetors, and ports.
• Prevents future carbon buildup on intake valves and ports.
• Will not void OEM/manufacturer's warranty.

Set of 8 BRAND NEW BOSCH OEM 6.5l Turbo Diesel Fuel Injectors 0432217276

Gumout 800001367 Fuel System Cleaner, 6 oz.

• Removes carbon deposits from engine parts to maximize engine performance and fuel economy.
• Prevents future carbon build-up and reduces emissions.
• Cleans fuel injectors, intake valves and ports.
• Oxygen sensor safe and safe for use in turbocharged and supercharged vehicles.
• Will not void OEM/manufacturer's warranty.

Fuel Banjo Bolt Ultra High Flow Upgrade Kit for Ford 6.0L & 6.4L fit for Powerstroke F250, F350, 450, F550

• Fitment -- This Banjo Bolt Upgrade Kit is a recommended update for Ford 2003-2008 6.0L and 2008-2010 6.4L fit for Powerstroke F250, F350, 450, F550 diesel..
• Tear Drop Design -- Design for both Power Stroke 6.0L and 6.4L owners who want to ensure maximum fuel flow to all injectors. These banjo bolts go into the head in the front of the engine to feed fuel to the injectors..
• Improve Performance -- The OEM Banjo bolts part numbers W302472 (Bolts) W303659 (Washers) cause a restriction in the supply of fuel to the engine, replacing them with our updated bolt kit will improve performance in your engine considerably..
• Package Include -- The kit contains 2 upgraded banjo bolts with new copper seals..
• 100% Satisfaction Guarantee -- If you're not 100% satisfied with this kit, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..

DURA LUBE HL-40199-06 Severe Fuel System Cleaner, 16-Ounce, Single

• Keeps deposits from forming to maintain performance and fuel economy.
• Prevents carbon build-up on indirect fuel injectors, carburetors, intake valves and ports.
• Maximizes performance and reduces emissions.
• Oxygen sensor safe and safe for use in turbocharged and supercharged vehicles.

YZHIDIANF 6 Pcs FJ1147 62410 Fuel Injector 0280158233 Fits For For:-Ram ProMaster, For:-Jeep Grand Cherokee Wrangler, For:-Dodge For:-Chrysler 3.6L V6 2011-2019, 05184085AC 5184085AD

• ... 【Preium Quality】 PREVENTS CORROSION AND BUILD UP with stainless steel slide and spring assembly, leading to longer service life of fuel injection system.REPLACEMENT FUEL INJECTOR PROMOTES SMOOTH ENGINE OPERATION and optimal gas efficiency.
• can reduce harmful emissions caused by worn injectors.
• 【Regular Cleaning Fuel Injectors】Generally Speaking, If The Car Is In Good Condition And The Fuel Quality Is Good, It Can Be Done Every 40,000-60,000 Kilometers. Even If The Fuel Injection Nozzle Is Slightly Clogged, You Don't Need To Be Too Nervous, Because The Impurities Can Be Sprayed And Dissolved When Accelerating At A High Gear. It Is Recommended That Car Owners Should Often Run At High Speeds When Driving Daily To Reduce The Possibility Of Carbon Deposits.
• 【Enhanced Performance】YZHIDIANF Fuel injectors Are Manufactured To The OE Specification To Provide Factory-fresh Appearance And Direct-fit, That Promote Smooth Engine Operation And Balanced Fuel Delivery Reducing Overall Fuel Consumption. No More Miserable Experience With Misfires Or Poor Gas Mileage.

BIOBOR JF Diesel Fuel Additive: Highly Effective Fuel Biocide Supplement, Prevents Corrosion of Fuel Tanks, Increases Lubricity, Dual Phase Chemistry | 1 Gallon, 4-Pack, (BBJUG04US)

• KILLS & PREVENTS BACTERIA. Highly effective biocide to kill and prevent microbial growth in fuels and tanks (bacteria & fungi). Lubricates injectors and fuel pumps..
• DUAL PHASE CHEMISTRY. Partitions both water and fuel phases for more effective and complete protection against microbes that cause contamination and corrosion. Prevents corrosion of fuel tanks and metal components caused by the acidic by-products of microbial growth..
• EXTENDS FUEL FILTER LIFE. Excessive sludge accumulation, clogged fuel filters and expensive fuel polishing can shut down engines. Proactive use of a biocide prevents biomass accumulation in fuel tanks, extends fuel filter life and inhibits microbial influenced corrosion..
• INCREASES LUBRICITY. As an added benefit, BioborJF has been proven to increase the lubricity properties of jet fuel, providing additional protection and reduced wear to fuel delivery components..
• OEM APPROVED. Proven to restore lubricity levels, exceeding ASTM standards and protecting injectors and pumps from premature wear. (ASTM-D6079 HFRR- engine manufacturer and industry stan....