Categories

Best Inlet Valves

Cen-Tec Systems 93070 Central Vacuum Kit with Switch Control Hose, 35 Ft, Silver

  • The 93048 is compatible with air turbine nozzles and all major brands of central vacuums including Beam, Electrolux, Eureka, Vacuflo, Vacumaid, MD, Cyclovac, Canavac, Hayden, Star Power, and Imperium. The hose is compatible with air turbine nozzles and 1.25 inches accessories of all types.
  • The 93070 permits remote activation of the central vacuum through the low volt contacts exposed in the inlet valve opening. It does not connect to 120 V power permitting the use of an electric power.
  • The lightweight highly flexible hose is made in the usa and is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves. The hose will work with standard accessories and any of the industry air turbine nozzles. It is not for use with an electric power nozzle.
  • The package comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush.
  • To confirm this package will work with your inlet valves you can confirm there are two small contact points located in your inlet valve on either the top half or bottom half of the inlet valve opening.
Check Stock

ROYHOO 4PCS 1/2 Inch Float Ball Valve Plastic Water Float Valve Mini Plastic Float Valve with Adjustable Arm for Automatic Water Level Control of Water Tank

  • Easy to use: you can have a automatic water level control by adjusting the angle which is formed by the float and the valve body, if the surface of water contacts the float, the water inlet switch will be automatically closed..
  • Quantity and measurement: we provide you with a total of 4 pieces 1/ 2 inch float ball valves, the valve total length is approx. 7.87 inch and a float length is about 3.74 inch, you can install different numbers of the water valves according to the size of the tank or pool..
  • Suitable condition: the float ball valve can be adapted to water temperature which ranges from 0 to 70 degrees Celsius, 0.01-0.8MPA water pressure is applicable, featuring with good control of the water inlet, will give a nice using experience to you..
  • Multifunction: our plastic water filter float ball valves are suitable for a variety of occasions, such as small swimming pools and storage tanks at home, more numbers of water valves should be available for you to install if water inlet is large, effectively solve the problem of taking water in a short time..
Check Stock

(2) Central Vacuum Square Door Inlet Wall Plate White for Nutone Beam VacuFlow

  • Brand New - Unused Parts Top Quality, Generic Aftermarket Part.
  • Includes Two (2) Wall Inlet Valves as pictured.
  • Standard Central Vacuum Wall Valve Inlet White Inlet Cover.
  • Fits the standard 1 3/8" vac hose Includes Two Screws.
  • Fits Select Nutone, Beam, and VacuFlow Vacuum Cleaner Models.
Check Stock

Central Vacuum Complete Electric Package with Allegro Unit 3 Inlet Kit

  • ✅ Manufacturer's Suggested Retail Price (MSRP): $US 1199.99. Allegro Power Unit with All Steel 5.7 inch Ametek Lamb Blower Motor. 5 Year Manufacturer's Warranty..
  • ✅ Electric Carpet Powerhead Wessel-Werk Made In Germany - Set of Steel Chromed Locking Wands with Cord Management - 3-Way Switch Deluxe 30 foot Electric Hose - Hose Cover 30 foot length - Central Vacuum Exhaust Muffler.
  • ✅ Set of Accessories: Tool Bag, Dusting Brush, Floor Tool, Crevice Tool, Upholstery Tool with Slide-On Brush, Plastic wands, and Metal Hose Hanger.
  • ✅ Installation Kit: 3 x Inlet Valve - White The Wall Inlet Valves are equipped with the low voltage connections for remote turn ON/OFF, 3 x Mounting Plate (for the valves), 9 x 90 degree Sweep Elbow, 6 x 45 degree Elbow, 6 x Stop Coupling (to join the 2" pipe together).
Check Stock

ANTOBLE Standard Central Vacuum Wall Inlet Valve Cover Plate for Beam Central Vac - White Round Door 2 Pack

  • Fit Perfectly: The central vacuum wall plate features a Round door. Worked perfectly for Beam central vac units..
  • Easy to install: The central vacuum inlet cover is made nicely with the valve opening easily to put the vacuum cleaner into the wall..
  • Most Common Inlet Valves Used: For new and existing low voltage construction applications..
  • Size Details: Inlet opening measures 1.5" and has 2 electrical contacts inside the port (as seen in picture)..
  • Includes: 2 central vacuum inlet valve round door cover plates replacements, 4 screws..
Check Stock

Eastman 60245 Crimp PEX Dual Washing Machine Outlet Box 1/2" Connection White

  • CONNECTION: 1/2-inch Crimp PEX (F10807) inlet connection and 3/4-inch Male Hose Thread (MHT) outlet.
  • BUILD: Sturdy construction made of heavy-duty plastic with 1/4- turn ball valves installed.
  • DESIGN: It has a right or left side drain connection. It can also be installed inverted for top-mount valves.
  • CONTENTS: Includes installed hot and cold water valves, support bracket, faceplate Snap-on frame accommodates up to 1″ drywall.
  • EASY INSTALLATION: This outlet box is designed for recessed residential applications.
Check Stock

Honeywell 040351 Central Vacuum 3-Inlet Installation Kit in a Box

  • Estimated materials to complete a 3 inlet home.
Check Stock

Hydro Master Washing Machine Outlet Box, Washing Stop Valves with Water Hammer Arrestor

  • 1/2-inch NPSM inlet connection and 3/4-inch Male Hose Thread (MHT) outlet.
  • Includes 1/4-Turn hot and cold ball valves with water hammer arresters installed, support bracket, and a Snap-On faceplate cover.
Check Stock

Watts Tankless Water Heater Service Valve Kit

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

Unisex Adult Steampunk Gas Mask Costume Accessory, Gold, One Size

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

Intex 26004E Above Ground Swimming Pool Inlet Air Water Jet Replacement Part Kit; Includes Plunger Valve, Strainer Connector, Strainer Grid, etc.

  • INCLUDED WITH REPLACEMENT PART: The replacement part set includes 1 plunger valve with O-ring (10747), 2 strainer connectors for 1.25-inch fitting (11070), 2 strainer grids (11072), and 1 pool inlet air nozzle set (12354).
  • INCLUDED WITH POOL INLET: Pool inlet air nozzle set includes the jet exterior, O-ring, fittings compatible with other set parts.
  • COMPATIABLE WITH: This pool jet replacement part kit works with pool filter pumps with 1,050 to 1,900 gallons per hour flow rates. You can use these pool jet replacement parts with any Intex above-ground pool.
  • INSTALLATION: Plunger valves install in the side of your Intex pool and connect with your Intex hose fitings.
  • WATER CIRCULATION: Better circulate water through your pool with the help of this Intex 26004E Above Ground Swimming Pool Inlet Air Nozzle Replacement Part Set.
Check Stock

Hydraulic Adjustable Variable Flow Control Valve, 0-30 GPM, 3/4” NPT Port Size

  • SPECIFICATIONS: Chief’s front end loader control valve has 1 spool, 3 position spring-center with 4th position float detent, a 25 GPM flow rate, and 3000 PSI maximum working pressure. It has 1/2" NPT work, 3/4" NPT inlet/outlet port, and weighs 16 lb..
  • VERSATILE: The RLD Series 1 spool 4 way directional control valves can be used to forward, retract, or hold the position in double-acting hydraulic cylinders. Their versatility means these hydraulic valves can be used in most hydraulic circuits..
  • ROBUST: Our hydraulic control valve 1 spool has a precision machined construction and is extremely sturdy. Dynamic and high performing, the control valve operates easily at pressures as high as 3000 PSI and can be actuated in multiple ways..
  • ENERGY EFFICIENT: Equipped with a float detent, this hydraulic valve 1 spool, allows the hydraulic fluid to pass over the center of the valve to the other port. These valves are energy and effort efficient..
  • HIGH UTILITY: This loader valve control can effortlessly shift into three positions per requirement. Our hydraulic directional control valves offer enhanced directional control of actuators, even in cramped spaces, and prevent excess heat build-up..
Check Stock

Refrigerator Icemaker Water Solenoid Valve for Whirlpool Kenmore

  • Replacement for numbers AP3103467, PS358631, 2315576, 2315508, 2210436 and 2181702.
  • This Ice Maker Valve fits specific Whirlpool manufactured Side by Side Refrigerator models including Kitchenaid, Roper, Estate, Kirkland & Kennmore.
  • This valve is designed to replace a wide variety of single coil valves.
  • The valve has: 1/4″ male compression inlet. (Can be retro fitting from original garden hose type connection if present with fittings provided) 1/4″ male compression outlet is printed on the sticker of the valve & this is a replacement for and valves.
  • Included is Compression Union, Nut, Sleeve, Mounting Bracket, Screws and Tubing Inserts.
Check Stock