Categories

Best Inline Fitting Nipple Fittings

NU Aqua Ice Maker and Refrigerator Connection Kit For Reverse Osmosis Filtration System

  • COMPATIBILITY: Works with NU Aqua Platinum Series and most standard under sink reverse osmosis systems using 1/4” tubing. Multiple uses such as ice makers, water coolers, dispensers, humidifiers, refrigerators and many more.
  • EASY INSTALLATION: Featuring quick connect fittings your fridge will produce crystal clear, clean and great tasting ice within less than 30 minutes. Easy to use push-in fittings require no hand tools for installation.
  • INCREASES RO SYSTEM BENEFITS: Not only will your reverse osmosis system produce drinking water it will now be connected to your ice maker so that you can have great tasting ice. The provided T fitting allows the system to function for both application with no loss in performance..
  • HIGH QUALITY COMPONENTS: Superior high strength quick connect fittings and adapters ensure long lasting and a guaranteed leak free experience.
  • KIT INCLUDES: 1x 16FT 1/4” white tubing, 1x 1/4” x 1/4” x 1/4” T valve, 1x 1/4” x 1/4” Inline shut off valve, 1x compression fitting set.
Check Stock

WMYCONGCONG 80 PCS Hydraulic Zerk Grease Fitting Assortment Kit SAE Standard including Straight, 90 Degree, 45 Degree Angled Grease Fitting for Replacing Missing or Broken Zerk Fitting

  • High Quality: The grease zerks fitting are made of zinc-plated iron, galvanized iron with high strength is more durable and rust-resistance..
  • Time-Saving: The grease zerk nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, will not slippery when rotating, easy and convenient to handle..
  • Wide Application: These straight and angled grease fittings are great to replace your old or broken fittings in the hydraulic grease line, suitable for most automotive, motorcycle, truck, farm, and industrial applications..
  • Good Storage Organization: Different size of grease fitting is packaged into different grids with size label for easy identification. Durable plastic case, convenient to storage. Handy assortment in organized case, easy to carry..
  • 80 pieces SAE Grease Fittings Assortment Kit: Sizes include: Straight 1/8"-27(10pcs).
  • all common-used sizes, good value, come in handy..
Check Stock

JACO Bike Presta Valve Tire Air Chuck - 1/4" NPT (2 Pack) (Open Flow)

  • Open Flow - these Presta valve attachments are open flow, meaning air will flow freely through the chuck even if not engaged with the tire valve stem (no check-valve). Must be used with an inline tire inflator gauge or standard tire gauge (Not for DIRECT connection to air compressor hose)..
  • 1/4 inch F-NPT fittings - feature a standard 1/4 inch F-NPT fitting, making them compatible with inline tire inflator tools and tire gauges..
  • Rugged & reliable - these straight angled Presta valve tire chucks are made of high-quality brass, providing a sturdy and reliable connection between your tire inflator tool and your bike tires..
  • Presta valve compatibility - the air chucks are specifically designed to work with presta valve equipped bike tires, allowing you to quickly and easily inflate your tires (NOT for Schrader valve types)..
  • Easy to use - simply attach them to any hand-operated, inline tire inflator tool connected to an air compressor hose, and start inflating your tires (NOT for use with floor pumps, hand pumps, or 12v air compressors)..
Check Stock

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

Terisass Bleed Screw M10 1.0mm Motorcycle Brake Master Cylinder Bleed Screw Aluminum Nipple Banjo Bolt with 2Pcs Washers & O-Ring Kit Universal(Black)

  • 【Why do you need it】:These fittings are extremely useful to help bleeding brakes which are problematic for air locks.Replacement bleed nipple for the front or rear brake lines..
  • 【Banjo Bolt Bleed Screw】M10x1.0mm Motorcycle Brake Braking Caliper Bleed Screw Nipple with Dust Cap.
  • 【Fitment】:Also be fitted to back of the master cylinders to bleed out trapped air. Easy installation, suitable for many motorcycle applications..
  • 【High Quality】：This bleed screw is made of high quality aluminum, anodized coloring for rust and corrosion resistance, not easy to deform, not easy to damage, rust and corrosion resistance, durable..
  • 【Excellent Perforamnce】:These fittings are extremely useful to help bleeding brakes which are problematic for air locks.Each component is precision-machined to exact tolerances for trouble-free.
Check Stock

8AN High Flow Inline Fuel Filter Kit with Bulkhead Adapter, Push-On Fitting and Fuel Pump Filter Bracket for 1/2 Fuel Hose Line, Great for Gasoline, E85 Ethanol Fuel and Diesel

  • The inline fuel filter are designed for use in both carbureted and EFI fuel systems. Protects your vehicle’s fuel system from contaminants, such as dirt, rust, and paint particles. Traps contaminants before they enter the fuel delivery system for improved engine performance.
  • The filters are constructed from anodized aluminum for a corrosion resistant, durable and sturdy, and feature a reusable 100 micron stainless steel mesh element. Great for Gasoline, E85 Ethanol Fuel and Diesel.
  • The AN push lock fitting featured a 37-degree mating angle which provided superior sealing. The o-ring seals do a good job sealing the fittings and end caps.
  • 8AN inline fuel filter kit with 2 pcs bulkhead adapters, 2 pcs push lock fittings, 1 Pc fuel pump filter bracket, 4 pcs adjustable hose clamps and 2 pcs o-ring seals.
  • SYKRSS value your shopping experience, if you encounter any problems in installing the fuel filter, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Aquasure Ice Maker Water Line Kit with Shut-Off Valve, 25’ Food Grade 1/4' Tubing, Quick Connect Fittings, Secure Locking Clips, Leak Free Design, US Customer Support, 1 Year Warranty

  • Aquasure Ice Maker Water Line Kit is a perfect compliment to any water filtration system. Connecting to an ice maker or water dispenser is extremely easy to install. It comes complete with high quality, food grade tubing and quick connect fittings that will get you up and running fast. Get the help you need with our professional technical support team and 1 year warranty..
  • BENEFITS: Affordable without sacrificing quality. Our ice maker water line kit makes connecting your water filtration system output to your fridge a breeze. Aquasure worked hard to consider every application and environment where installation might occur. The result? Tested, durable materials ensuring you get a clean, leak free, and crystal clear ice to your nearby fridge..
  • FEATURES: Equipped with Hydrofit quick connection fittings and premium tubing for fast, and safe connection without the need for any special tools. Simply route your water line to your refrigerator and install. Hydrofit inline ball valve allows for shut off during service or filter system maintenance. Allowing for easy maintenance between filter changes..
  • EASY INSTALL: Enjoy a headache free Installation with an included set of components needed for connecting your water filter system to your fridge ice maker. ....
Check Stock

ABN Grease Fitting Tool - 4 Way Grease Fittings Tool Easy Out Zerk Fitting Tool for Damaged Grease Zerks and Fittings

  • SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
  • This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
  • 4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
  • Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
  • FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
  • BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
  • 2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
  • EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
  • Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.
Check Stock

Kegco Keg Tap Coupler, 1

  • The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
  • This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
  • Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
  • This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
  • Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.
Check Stock

Glarks 145-Pieces Metric M6 M8 M10 Brass Zerk Grease Nipple Fittings Assortment Kit - Straight, 90 Degree, 45 Degree Angled Zerks

  • ♣ Product Type: High quality brass zerk grease nipple fittings assortment kit..
  • ♣ Package Content: This set include commonly used zerks metric fittings M6x1x28pcs straight, M6x1x20pcs 90 degrees, M6x1x20pcs 45 degrees, M8x1x15pcs straight, M8x1x15pcs 90 degrees, M8x1x15pcs 45 degrees, M10x1x12pcs straight, M10x1x10pcs 90 degrees, M10x1x10pcs 45 degrees total 145pcs in a plastic box..
  • ♣ High Quality: They are made of good quality brass, with extra strength and rust-resistance, they are hardened to prevent wear, smooth surface for easy to install..
  • ♣ Great Grease Zerk Fitting: These straight, 90 degree, 45 degree angled zerks allows you to simply insert lubricant directly into the bearing without having to disassemble or replace the bearing, perfect for restoration and replacing missing or broken grease zerks on your machinery..
  • ♣ Application: These commonly used zerks very suitable for many most automotive, motorcycle, truck, farm, and industrial applications..
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • ...nd pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
  • PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and fittings.
  • Comes with flex hoses, fittings, and instructions for quick reference.
  • Includes Brass 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.
Check Stock

60 Pcs Metric Grease Fittings Kit, Straight and Angled Grease Zerk Kit, M6 M8 M10 1/4" 1/8" 45 90 Degree Hydraulic Grease Zerk Assortment for Angled Grease Guns Mechanical Component Lubrication

  • Premium Material: All grease gun fittings and tips are made of excellent high strength metal material, which is sturdy, Corrosion and rust resistance, shatter-resistant, and durable for long time use..
  • Easy to Use: The grease nipple fitting has a clear thread connection, easy to fix and install, and has good sealing performance. Ready for your everyday use..
  • Easy to Store: The steel grease fitting connectors are small in size with a transparent storage box, easy to carry and store, easy to use or find..
  • Wide Applications: The grease fitting kits are widely used in most cars, motorcycles, trucks, agricultural and industrial applications, etc. Resolves incompatibility issues with straight, 90 degree, and 45 degree adjustments..
  • Package Includes: You will receive 5 pcs m6 45°, 5 pcs m6 90°, 15 pcs m6 180°, 5 pcs m8 45°, 5 pcs m8 90°, 10 pcs m8 180°, 5 pcs m10 45°, 5 pcs m10 90°, 5 pcs m10 180°, a total of 60 pcs, enough for your daily use..
Check Stock

120 Pieces Brake Bleeder Rubber Caps Brake Bleeder Screw Caps Grease Fitting Cap Rubber Dust Cover with Keeper for Cars and Motorcycle

  • ...d with quality rubber material, durable and not easy to break or deform, firm to use and has good sealing, helpful to prevent the metal grease fitting away from erosion and rust, serve for long time use, save your time and effort.
  • Where to use: the rubber dust covers work well at keeping bleed screws and grease fittings away from dirt and moisture, designed with inner rib for better fixing and securely fastened, must-have items for car.
  • Easy to store: we provide a small box for you to store these lightweight and small size rubber brake nipple caps and no worry about losing, portable and easy to carry, you can place them in your car and would not take up too much space, bring you convenience when you need to replace the brake bleeder screw caps.
Check Stock