Categories

Best Inner Hardened Pipe

RIDGID 29993 227S Stainless Steel Pipe Reamer Tool, 1/2-inch to 2-inch Inner/Outer Reamer

  • Ideal for reaming on stainless steel and copper tubing.
  • 45 cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes.
  • Hardened steel construction for maximum durability.
  • dual inch and metric measurement bar for ease of use.
  • Pipe reamer has a 1/2-inch to 2-inch (12 mm to 50 mm) outside diameter capacity.
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.
Check Stock

Assorts' Reversible Ratchet Adjustable Tap Wrench (1/4'' T0 1/2'' (6.0MM TO 12.0MM))

  • Designed to turn taps-tools that cut threads on the inner surface of a hole or pipe or other small tools, such as hand reamers and screw extractors..
  • T-Ratchet can be set for Right or Left hand operation or locked to use the tool without it.
  • Wrench features a self-centering hardened steel jaws and knurled chuck sleeve provide positive grip.
  • The sliding T-handle fits into tight spaces while providing excellent leverage.
  • a). 1/16" to 5/32" (1.5 to 4.0 mm) b). 5/32" to 1/4" (4.0 to 6.0 mm) c) 1/4" to 1/2" ( 6.0 to 12.0 mm).
Check Stock

IRWIN VISE-GRIP Tools Cast Aluminum Pipe Wrench, 5-Inch Jaw Capacity, 36-Inch (2074136) , Gray

  • Heavy-duty cast aluminum housing is 40% lighter than cast iron. The I-beam handle's wide design provides better weight distribution..
  • Drop-forged jaw is heat-treated to resist distortion or breakage. Hardened teeth provide tremendous bite..
  • Easy-spin adjusting nut is heat-treated for durability..
  • Hammer head provides flat surface for hammering..
Check Stock

Reed Tool DEB4 Deburring Tool for Plastic 1-1/4 to 4-Inch

  • One easy revolution of the DEB4 Deburring Tool produces a 3/32-Inch 15-Degree chamfer in seconds.
  • Creates a smooth pipe end so solvent spreads evenly as pipe is joined.
  • Reversible, sharpenable, hardened steel blade for two cutting edges.
  • Deburrs six pipe sizes: 1 1/4-Inch - 4-Inch.
Check Stock

Wheeler Rex 4908 Ratchet Pipe Cutter, 1/2\-6\ Standard, 5\ XH Soil, 6\ No-Hub and 8\ Tile

  • No vise required - Cutter does not rotate around pipe.
  • Ratchet action cleanly cuts pipe in tight quarters (490).
  • Hardened deep penetrating cutter wheels make fast clean cuts.
Check Stock

Yost Vises 34C Combination Vise | 6 Inch Jaw Width Heavy-Duty Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Ductile Iron | Blue

  • COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
  • TECHNICAL SPECS: Jaw Width 6" (15.24 cm), Jaw Opening 10" (25.4 cm), Throat Depth 7.5" (19.05 cm), Min Pipe Capacity 0.25" (0.635 cm), Max Pipe Capacity 6" (15.24 cm)..
  • SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....
Check Stock

Bessey VAC-6 Angle Plates (6-Pack)

  • 【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
  • 【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
  • Note: Mounting screws are not included here.
Check Stock

Armour Line RP77171 Internal Plastic Pipe Cutter, 1-1/4 in Or Larger Diameter (Single Pack)

  • PLASTIC PIPE CUTTER – Resists rust, corrosion and streaking and comes in a beautiful chrome plated finish..
  • STEEL CUTTER BLADE – Saw tooth hardened steel cutter blade cuts plastic pipe from 1-1/4 in. in diameter..
  • ATTACHES TO POWER DRILL – Steel shaft attaches to power drill..
  • FLUSH CUT – Allows for a flush cut to the ground..
  • REQUIRES – Use on plastic pipe only. Requires a power drill for use..
Check Stock

General Tools 127 Iron Pipe Cutter

  • Cuts up to 2-5/8-Inch copper and iron pipe.
  • Grooved rollers accept flared pipe ends to provide cuts directly below the flare. Solid frame for greater strength.
  • Cutting wheel is made from bearing tool steel for maximum durability. Includes fold-out deburrer with positive lock and two cutting edges.
  • Hardened Acme threads for greater cutting strength.
Check Stock

Stanley Proto J140SET Proto 4 Piece Internal Pipe Wrench

  • Ideal for removing broken threaded pipe ends, plugs and fittings.
  • Installation and removal without thread damage.
  • Eccentric cam action engages wrench against the walls of the pipe.
  • Hex body allows for use of adjustable wrench for added torque.
  • Made from hardened steel and plated to help prevent rust, Made in USA.
Check Stock

Mophorn 460-6 Tripod Pipe Chain Vise 1/8 -6 Capacity,Pipe Stand Portable Foldable Steel Legs,Pipe Jack Stands w/ Tool Tray Tripod Stand Chain Vise Ideal for a Variety of Pipe Materials

  • 1/8"-6" Pipe Capacity: This tripod stand chain vise features a large pipe capacity from 1/8 to 6 inches. The tool with hardened teeth is designed to....
  • Compact & Portable: This chain vise stand's flat-folding design enables briefcase-style transportation and compact storage in job boxes. Perfect for....
  • Two-in-One Tool: Our pipe vise tripod is also equipped with three pipe benders. The tube bending feature provides you with remarkable convenience....
  • Stable & Skid-proof: The steel legs of the tripod pipe vise are designed with rubber mounts to eliminate sliding. And the heavy-duty tray under the....
  • Versatile Use: Our pipe stand for welding is suitable for all pipe-related home improvement repairs that need a tight grip. Chain Vise delivers....
Check Stock

Mini Copper Pipe Tubing Cutter - Adjustable Mini Tube Cutter for Copper Metal, Plastic, Brass, Thin Stainless Steel for （1/8 inch -7/8 inch）/ (3-22mm) OD Pipes)

  • 【Size】the mini pipe cutter is small, with a size of about 40 to 60 mm, suitable for construction sites, HVAC and refrigeration, plumbing, manufacturing, heating, decoration and even garage maintenance shops..
  • 【Material】the mini pipe cutter is made of high-quality zinc alloy material, which is strong and durable and has a long service life.
  • 【Advantage】the hardened cutting steel blade made of high quality material can easily cut the pipe and the blade can be disassembled and replaced..
  • 【Easy to use】it is easy to operate and adjustable, and can be rotated and cut on pipes with an outer diameter of 3-22 mm (1-8 inch to 7-inch)..
  • 【Application】it is suitable for cutting copper pipe, aluminum pipe, plastic pipe and other thin pipes or tubes. it is easy to use and improve work efficiency..
Check Stock

Mini Copper Pipe Tubing Cutter - Adjustable Mini Tube Cutter for Copper Metal, Plastic, Brass, Thin Stainless Steel for （1/8 inch -7/8 inch）/ (3-22mm) OD Pipes)

  • 【Size】the mini pipe cutter is small, with a size of about 40 to 60 mm, suitable for construction sites, HVAC and refrigeration, plumbing, manufacturing, heating, decoration and even garage maintenance shops..
  • 【Advantage】the hardened cutting steel blade made of high quality material can easily cut the pipe and the blade can be disassembled and replaced..
  • 【Material】the mini pipe cutter is made of high-quality zinc alloy material, which is strong and durable and has a long service life.
  • 【Easy to use】it is easy to operate and adjustable, and can be rotated and cut on pipes with an outer diameter of 3-22 mm (1-8 inch to 7-inch)..
  • 【Application】it is suitable for cutting copper pipe, aluminum pipe, plastic pipe and other thin pipes or tubes. it is easy to use and improve work efficiency..
Check Stock