Wilmad-LabGlass LG-4890-101 Friedrich Condenser, Standard Taper 29/26
- The spiral inner tube contains the coolant which fits closely within the jacket so vapor must pass along spiral in a thin layer.
- With Standard Taper outer joint attached to upper end jacket and extending upward at an angle of 15°.
- The bottom of condenser has a Standard Taper inner joint with a drip tip of the same size.
Check StockInner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments
- ... long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
- ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use lubricating fluid for added comfort..
- ⚒️ What You Get ⚒️ - Our slide hammer puller set includes 1* heavy duty slide hammer.
- 2pcs* 16mm nut. Everything you need to remove the CV Axle,this cv axle puller kit can help you..
Check StockSP Scienceware Wilmad-LabGlass LG-4890-100 Friedrich Condenser, Standard Taper 24/40
- The spiral inner tube contains the coolant which fits closely within the jacket so vapor must pass along spiral in a thin layer.
- With Standard Taper outer joint attached to upper end jacket and extending upward at an angle of 15°.
- The bottom of condenser has a Standard Taper inner joint with a drip tip of the same size.
- Package Dimensions: 1 L x 1H x1W x(inches).
Check StockSi Joint Hip Belt for Women and Men - Stabilizing Si Brace Alleviates Inflammation Sciatica Belt - Anti-Slip Si Joint Belt - Trochanter Sacroiliac Support Belt
- FITS HIP CIRCUMFERENCE SIZE 30 – 46 inch / 76-116cm.
- widths 4.7 inch(12cm). Non-restricting design fits both men and women..
- ALLEVIATES SI JOINT PAIN & LESSENS INFLAMMATION – Sacroiliac belt helps stabilize the sacroiliac joint (or “SI joint”) that is hypermobile or inflamed, and reduces pelvic, lower back and/or leg nerve pain caused by SI joint dysfunction..
- LIGHTWEIGHT AND DURABLE – The perforated neoprene used in the inner belt is lightweight, breathable and pilling resistant. Designed to be worn comfortably day and night and will conceal easily beneath the users clothing.
- NON-SLIP BACK SI SUPPORT BELT – The sacroiliac belt gives your body the added flexibility and comfort to be worn at all times. The anti-slip silicone strips on the inner belt prevents the belt from sliding up and down.
- DUAL ADJUSTMENT AND MAXIMUM COMFORT – The “triple band” design provides controllable compression and the secondary straps allow you to customize the amount of additional compression needed over specific sore..
Check StockECCPP Ball Joint Tool 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 For Toyota Tacoma - Inner Tie Rod Ends Lower Ball Joints Outer Tie Rod Ends Upper Ball Joints
- FITMENT - Inner Tie Rod Ends Lower Ball Joints Outer Tie Rod Ends Upper Ball Joints 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 For Toyota....
- WHAT YOU GET - 2 EV433 Front Inner Tie Rod End, 1 K90258 Front Lower Ball Joint - Driver Side, 1 K90259 Front Lower Ball Joint - Passenger Side, 1....
- ADVANTAGE - ONE YEAR WARRANTY - Our products has undergone extreme impact, wear, and fatigue testing to help ensure quality and durability.
- BENEFIT - Ball Joints can effectively adjust the wheel's steering angle. When added to control arms, ball joint assembly is the perfect fit for....
- IMPORTANT NOTE - Please check the description or use the year,make,model in the Amazon Fitment Filter System in the top left corner to confirm the....
Check StockCENTAURUS 4Pcs Universal Motor Joint Shaft Coupling 4mm to 4mm with Screws
- 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade Universal Motor Joint Shaft Coupling 4mm to 4mm is 100% brand new,wearproof, durable and widely used for motor etc..
- 【HIGH QUALITY】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is made of high quality wearproof steel material which can use for a long time..
- 【WIDE APPLICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is widely used for shaft connection,produced based on International Flange Standard..
- 【MAIN SPECIFICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm ,Inner Diameter: 4mm to 4mm. Outer Diameter is 9mm. Height is 23mm. Color: Silver.
- 【PACKAGE & SERVICE】Package Include: 4Pcsx 4mm to 4mm Universal Joint Shaft Coupling.Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check StockDONLAB CDS-01-200 ASTM STD Glass West Condenser 24/40 Joint 200 mm Jacket Length 10mm Hose Connection
- O.D. 10mm hose connections, 24/40 top outer joint and inner drip tip joint.
- Narrow annular space increases cooling efficiency.
- The man-blowing Borosilicate 3.3 glass is uniform and flawfree.
Check StockDr.Acces Golf Cart DS Inner Ball Joint+The nut/Steering Rack Joint Fits 101880201 Club Car DS Golf Cart Years 1997 & Up
- For Club Car DS Golf Cart Inner Ball Joint+The nut.
- Inner steering joint, (hex body). For Club Car DS Gas and Electric golf cart Yealy 1997-up.
- Not available on vehicle models such as Club Car Precedent and Carryall..
- Easy to install.If there is anything questions,please contact us freely..
Check StockPosture Magic Sacroiliac SI Joint Support Belt for Women and Men - Reduce Sciatic Pelvic Lower Back and Leg Pain - Stabilize SI Joint Regular Hip Size 30-45
- ☑️ SI BELT - FITS HIP SIZE: 30 - 45 INCH - BELT WIDTH - 3.9 INCH. Our non-restricting design fits both men and women. Helps correct SI joint....
- ☑️ ALLEVIATES JOINT PAIN AND REDUCES SI JOINT INFLAMMATION – The Posture Magic SI joint belt helps stabilize the sacroiliac joint that is....
- ☑️ DUAL ADJUSTMENT AND MAXIMUM COMFORT - Posture Magic sacroiliac joint brace is designed to be worn for long periods of time, which is the key to....
- ☑️ LIGHTWEIGHT AND DURABLE - The perforated neoprene used in our SI belt is lightweight, breathable and pilling resistant. The ribbon fish fabric....
- ☑️ STAYS IN PLACE - The anti-slip silicone strips on the inner trochanter belt prevents the SI belt from sliding up and down. The SI belt can also....
Check StockBailey Universal Joint Assemblies (Standard Series), Standard U Joint with 1 inch x 1 inch Inner Diameter - Universal Joint with Relubricable Bearings - Standard Rod Ends Ball Joint, 1000 RPM, 2.52 lb
- SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 1-inch x 1-inch inner diameter, ¼” keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.52 lb (1.14 kg)..
- PRECISE CONTROL: This driveline u joint is ideal for connecting control rods, steering links, etc. It maintains a fixed point of contact between two shafts and can control the movement of the shafts with high precision..
- HIGH SPEED OPERATION: This 1000 RPM u joint offers 90 degree deflection and is capable of carrying up to 1000 RPM torque. Thanks to its needle roller bearings, this universal standard joint can tackle big and rigid shafts with ease..
- MADE TO LAST: This universal joint is made with durability in mind. Its forged yoke is sturdy, flexible, reliable, and holds up well against high heat. Our universal joint is long-lasting and low maintenance..
- MULTIPURPOSE USES: Our steering shaft u joint has a wide variety of applications in automobiles including lightweight, commercial and off-highway vehicles. It offers hassle-free interchange with the Spicer 1000 series..
Check StockCBRIGHT 2 Pieces 6mm Female Thread Connector Bearing Steel Joint Rod End Bearing
- Products can withstand radial load,Axial load or radial. Axial simultaneous joint load..
- Due to the inner surface of the spherical inlaid composite material,therefore, the bearing in the work can produce self-lubricating..
- Use: Joint bearings are widely used in engineering hydraulic cylinders, forging machine tools, engineering machinery, automation equipment, automotive shock absorbers, water conservancy machinery, etc..
- 2 Pieces 6mm Female Thread Connector Joint Rod End Bearing.
Check StockCBRIGHT 4 Pieces 6mm Female Thread Connector Bearing Steel Joint Rod End Bearing
- Products can withstand radial load,Axial load or radial..
- Product Material: bearing steel. Axial simultaneous joint load..
- Use: Joint bearings are widely used in engineering hydraulic cylinders, forging machine tools, engineering machinery, automation equipment, automotive shock absorbers, water conservancy machinery, etc..
- Due to the inner surface of the spherical inlaid composite material,therefore, the bearing in the work can produce self-lubricating..
- 4 Pieces 6mm Female Thread Connector Joint Rod End Bearing.
Check StockCorning Pyrex Vacuum Distilling Two-Way Joint Adapter with Extended Drip Tip, 105 degree Angle (Case of 6)
- With outer Standard Taper joint at the top and an inner-sealed through drip-tip joint at the bottom.
- O.D. drip-tip at the bottom extends about 20 mm below the lower end of the joint.
Check Stock