Categories

Best Inner Rotor

Niome Black 90/100 14\ Rear Wheel Tire and Rim Inner Tube with 12mm Bearing Assembly Fit For 110-125cc Dirt Pit Bikes

  • This is the 14" front dirt bike wheel assembly commonly used on many 50cc, 70cc, & 90cc dirt bikes..
  • The assembly comes complete with the front rim, 2.50-14 knobby tire, inner tube, wheel bearings and brake disc rotor..
  • Please note: Tire sizes vary by ride, please check your current tire and wheel sizes before placing the order..
  • Package include: 1 x Tire + 1 x Rim + 1 x Inner tube + 1 x Brake disc rotor.
Check Stock

NSD Roll N Spin Rainbow Lit AutoStart Spinner Gyroscopic Wrist and Forearm Exerciser with AutoStart and Multi-Lit LED Purple

  • Autostart with internal pre-tensioner, just roll back the rotor in the direction of the arrow on the rotor or against the internal resistance, when....
  • Computer balanced inner gyroscopic rotor for VIBRATION FREE operation at up to 15,000 RPM.
  • Purple Multi-LED Spinners lights up in various colors as speed increases.
  • Hard, impact resistant plastic shell that comes in an attractive PURPLE.
  • Small, compact exercise machine you can take ANYWHERe.
  • Provides up to 24.3 lb-in of torque at 10,000 RPM.
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear，1Pair

  • ...tor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or scrap the oil disc.
Check Stock

TDPRO Front 60/100-14 & Rear 80/100-12 Wheel Rim With 12mm Bearing & Front Rear Hydraulic Master Cylinder & Sprocket and Brake Disc Rotor Assembly for Dirt Pit Bike

  • Suitable for many 50cc 70cc 90cc dirt pit bikes.
  • Front wheel comes complete with rim, 2.50-14 knobby tire, inner tube, wheel bearings and brake disc rotor.
  • Rear wheel comes complete with rim, 3.00-12 knobby tire, inner tube, wheel bearings, sprocket and brake disc rotor.
  • Package include: front wheel + rear wheel + rear hydraulic brake + front hydraulic brake.
  • Please note: Tire sizes vary by ride, please check your current tire and wheel sizes before placing the order.
Check Stock

Isokinetics Inc Brand Peanut Ball - Anti-Burst - 50cm 19.5 - Purple - for Exercise and Physical Therapy

  • ⚡️ REFINED AUTOSTART 3.0 with internal pre-tensioner, just roll back the rotor in the direction of the arrow against the internal resistance, when....
  • ✊ SUPERIOR GRIP EXCERCISE with the all-new MACHINE balanced inner gyroscopic rotor for VIBRATION and INJURE FREE operation at up to 17,000 RPM.....
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers, Mechanical Disc Brakes for MTB, Mountain Bike, E-bike and Electric Bike 2PCS Front/Rear Red

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way brake system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the line pulling hydraulic brake of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or scrap the oil disc.
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold

  • ...tor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or scrap the oil disc.
Check Stock

YaeTek Oil Change Pump Extractor, 12v 60w Marine Oil Change Pump Electric Oil Pump, Diesel/Engine Oil Scavenge Pump for Oil Changes in Car, Boat, Truck, Motorcycle

  • Diesel or heating oil: approx 6.0-7.0L/min.
  • Motor oil(40-60℃)：approx 0.8-1.0L/min.Measurements:3.3*5.1*4.9in,Weight:1.87pounds,Maximum delivery Height:0.7m..
  • 【Working Principle】When the oil well pump rotor rotates, the blades on the rotor are closely attached to inner surface of stator under the action of centrifugal force and oil pressure, so that the 2 blades are formed by inner surface of rotor and stator. The working volume of pump is first to absorb oil from small to large, and then to discharge oil from large to small after absorbing oil. Within one rotation of blade, oil absorption and discharge are completed twice. This cycle continues..
  • 【Package Include】The pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes..
  • 【Do not pump】Except for engine oil and diesel,do not pump hot oil or when the car engine is running.Car engine must cool complately.Do not pump gas,paraffim,petrol or other inflammable liquids.Do not pump water and it is not suitable for stor....
Check Stock

Utoolmart Angle Grinder Flange Nut, Replacement Electrical Fitting Part Inner Outer Lock Nuts for Makita 9523 4pcs

  • 【Dimension】- Inner Diameter (Silver): M10.
  • 【Material】- Made of alloy material, durable.Accessories only, angle grinder is not included..
  • 【Usage】- It is used for Makita 9523 angle grinder motor rotor..
  • 【Feature】- Fixing component, industrial and construction fasteners..
  • 【Wide Application】- Used widely in the home and office appliance, communication equipments, ship assembly and other machinery industry..
Check Stock

Magura Unisex's 2701938 Disc Brake Rotor, Silver, 203 mm

  • Offering a special patented interlocking of the outer and inner rings (Dovetail Interlink Technology) giving optimum braking performance even under heavy loads.
  • In addition, maximum heat resistance and stability.
Check Stock

Wrist Exercise Ball Fidget Gyro Wrist Trainer | MORF Auto-Start 3.0 Hand Exerciser Gyroscope | Gyroscopic Forearm Wrist Strengthener Workout Balanced Toy Power Spinner Gyro Ball with LED Lights

  • ....0 with internal pre-tensioner, just roll back the rotor in the direction of the arrow against the internal resistance, when sufficient tension is achieved, release and enjoy. MORF Industries brings you a better & more versatile exerciser gyroscope ball..
  • ✊ SUPERIOR GRIP EXCERCISE with the all-new MACHINE balanced inner gyroscopic rotor for VIBRATION and INJURE FREE operation at up to 17,000 RPM. Meaning you get full and versatile resistance via rotating and angular momentum..
  • ARM WORKOUT, ANYTIME, ANYWHERe. Equipped with premium WHITE Multi-LED Spinners, the workout gyro ball grip strengthener lights up in various colors as speed increases. Increase grip strength while enjoying an innovative workout. Great support for bodybuilders, tennis players, rock climbers, musicians, gamers and also for anyone looking for therapy from a wrist injury or carpal tunnel syndrome..
  • ⭐️ SLEEK & DURABLE: Unlike the other powerbal brands, the MORF super grip exerciser ball comes in sophisticated white color with sleek grey see-through military-grade plastic. Make a statement about your exquisite style with our original spinner gyro ball who looks neat both at night and day. Makes a cool gift idea for any occasion!.
  • LIGHTWEIGHT, UNIQUE & COMPACT take this forea....
Check Stock

Electric Motor, 2 Phase 28 Stepper Motor stepping Driver Replacement Tool Current 0.8A Length Approx 48mm for Transmission Occasions

  • 【Easy to Carry】Small size and easy to carry, it is a good choice to replace the old stepper motor, with long service life and low maintenance cost..
  • 【Advanced Technology】The inner rotor adopts advanced technology, and the surface is coated with imported rotor glue, which can prevent burrs from being oxidized and ground carbon steel and increase motor noise..
  • 【Scope of Application】The front and rear covers are well connected, the body is black electrophoresis, high-end atmosphere, the body size is standard, the 2-phase 28 stepping motor is suitable for industrial motor control and transmission occasions..
  • 【Good Performance】The product can produce a high torsiontoinertia ratio on the loaded shaft, and can eliminate system errors caused by the use of reduction gears..
  • 【Quality Service】We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..
Check Stock

Eppendorf 5405000441 5425 Centrifuge, Knob Control with Rotor FA-24x2 and Aerosol-Tight QuickLock Lid, 120V

  • Max. Rotor capacity: 10 × 5.0 ml vessels.
  • New: Eppendorf quick-lock technology which allows for fast and ergonomic locking of the rotor lid.
  • New: increased software features (e.G. 10 acceleration and braking ramps, 3 program buttons, short function without continuous pressing of the key).
  • New: increased rotor program (5.0 ml rotor, swing-bucket rotor for pcr strips).
Check Stock