ResMed AirMini DC Converter 38839

  • ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W.
  • Compatible With ResMed Airsense 10 Series: AirSense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier.
  • Fits Resmed CPAP and BiPAP Machines S10 370001 +24V 3.75A 90W.
  • ResMed AirCurve 10 Series CPAP and BiPAP machine: AirCurve 10 S BiLevel Machine, AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier.
Check Stock

Heavy Duty 4-in-1 On/Off Switch Extension Cord 12-AWG 15A Household Plug to 20A T Blade Adapter Cable with Heavy Duty Double Break 23A 125V Inline Switch, L=40CM

  • [40CM] Heavy Duty 12AWG cord with double break 23A 125V/16A 250V on/off switch, Angled Nema 5-15P (3-Prong male) to 4-in-1 T-blade receptacle for your ev car charging. The On/Off [Double Break] switch rated @ [23Amp 125Volt and 16Amp 250V], 3 Outlet USA Canada extension power cord with 23-Amp/125Volt on off switch for your household 3-Prong power devices..
  • [4-in-1] Nema 5-15P 15-AMP male 125V to Nema 5-15R/5-20R/6-15R/6-20R ac adapter Your devices need to support WIDE RANGE VOLTAGE [range 110V to 220V] in case of connect to Nema 6-15P or Nema 6-20P 15A/20A 250V ac power devices..
  • [Compatible 1]: Nema 5-15P 15-AMP Male(125V) to Nema 5-15R 15-AMP Male(125V) Female ac adapter. Compatible 2: Nema 5-15P 15-AMP Male(125V) to Nema 5-20R 20-AMP Male(125V) Female ac adapter..
  • [Compatible 3]:Nema 5-15P 15-AMP Male(125V) to Nema 6-15R 15-AMP Male(250V) Female ac adapter. [Compatible 4]:Nema 5-15P 15-AMP Male(125V) to Nema 6-20R 20-AMP Male(250V) Female ac adapter.
Check Stock

HiLetgo 2pcs SSR-40DA Solid State Relay Single Phase Semi-Conductor Relay Input 3-32V DC Output 24-380V AC

  • SSR-40DA 40A 250V Solid State Relay Alloy Heat Sink.
Check Stock

How to Use a Breadboard! (Make: Handbook)

  • 30A High Current 12V Contactor relay Switch DC power Switching Control Board.
  • Using high-quality ultra-small optocoupler, anti-interference ability, stable performance..
  • Using 9.5mm black fence terminal, standard 30A terminal, stable and solid, reliable quality..
Check Stock

90W AC DC Adapter Charger Replacement for Resmed S10 Series, Fit for ResMed Airsense 10 Air Sense S10 AirCurve 10 Series CPAP and BiPAP Machines Power Supply Cord

  • ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W.
  • Compatible With ResMed Airsense 10 Series: AirSense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier.
  • Fits Resmed CPAP and BiPAP Machines S10 370001 +24V 3.75A 90W.
  • ResMed AirCurve 10 Series CPAP and BiPAP machine: AirCurve 10 S BiLevel Machine, AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier.
Check Stock

BLUETTI AC200P Portable Power Station with Solar Panel Included 2000W Solar Generator with 5pcs SP120 120W Solar Panels,6 120V AC Outlet Lithium Battery Backup for Home Outage Emergency Outdoor Camping

  • 【BLUETTI AC200P 2000Wh Power Station】Solar/AC/Car/Generator/Lead-acid Battery Recharge: Wide 35-150V/Max.700W/12A solar Input, MPPT, allowing full recharge AC200P within 3-3.5Hrs(Only if Max.700W solar input). About 5.5Hrs to fully recharge it by One 400W AC adapter & supports 3Hrs by dual AC adapters (need to buy the 2nd adapter+DC7909 to XT90 cable separately).You can fully recharge it by 24V/12Vcar in about 10Hrs/20Hrs. AC+PV recharge AC200P simultaneously in about 2.5Hrs..
  • 【BLUETTI 120W Solar Panel】It’s made of high qualified monocrystalline silicon cells which is 5% higher efficient than traditional monocrystalline. It features with ETFE lamination thus has better light transmittance, more durable, scratch-proof, and easy to clean by wet cloth. Foldable design with handle, weight only 9.48lbs. Convenient to carry around for outdoor camping. Easily adjust the angle by the kickstands for better solar absorption..
  • 【Fast Solar Recharging】 With a max 700w solar input allowing full recharge AC200p within 5-6 hours by connecting 5pcs BLUETTI SP120 120W solar panels in series.The actual recharge time may varies from weather condition, temperature or the angle or the location you place the solar panel..
  • 【Portable Power Station with Solar Pan....
Check Stock

Down Angled Four-in-One Heavy Duty SJTW 12AWG Extension Cord 12-AWG 15A Household Plug to 20A T-Blade Adapter Cable, Angled Adapter Extension Cord for EV Car Charger L=1FT

  • Heavy Duty 12AWG cord Angled Nema 5-15P (3-Prong male) to angled 4-in-1 T-blade receptacle for your ev car charger. 3 Outlet USA Canada extension power cord for your household 3-Prong power devices..
  • [4-in-1] Nema 5-15P 15-AMP male 125V to Nema 5-15R/5-20R/6-15R/6-20R ac adapter Your devices need to support WIDE RANGE VOLTAGE [range 110V to 220V] in case of connect to Nema 6-15P or Nema 6-20P 15A/20A 250V ac power devices..
  • [Compatible 1]: Nema 5-15P 15-AMP Male(125V) to Nema 5-15R 15-AMP Male(125V) Female ac adapter. Compatible 2: Nema 5-15P 15-AMP Male(125V) to Nema 5-20R 20-AMP Male(125V) Female ac adapter..
  • [Compatible 3]:Nema 5-15P 15-AMP Male(125V) to Nema 6-15R 15-AMP Male(250V) Female ac adapter. [Compatible 4]:Nema 5-15P 15-AMP Male(125V) to Nema 6-20R 20-AMP Male(250V) Female ac adapte.
Check Stock

KFD DC Adapter Power for ResMed Airsense 10 Air Sense S10 AirCurve 10 Series CPAP BiPAP Machines AirCurve S10 Resmed S10 370001 37297 R360-760 370006 R370-7407 12-24V Vehicle Car Charger 24V 3.75A 90W

  • ...pap adapter Compatite with Resmed Model: R270-7468 R2707468 IP21 R370-7296 R3707296 DA90D24 37006 370006 IP22 R370-7407 R3707407 37297 37207 370001 DA-90F24 resmed dc power converter for airsense.
  • Warranty: 30 Days Free Exchange /36 Months Warranty.
  • If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input voltage 9-32V DC adapter, suitable for 12V cars and 24V tBus, Van, Truck, Boat, Motorhome, Yacht, Digger, Crane and portable power station.
  • --Please confirm the specifications and plug size before purchasing TAIFU resmed airsense 10 power cord !If you can't make sure,pls feel free to contact us..
  • Attention: 1.If the resmed 10 dc adapter works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. 2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
Check Stock

KFD DC Adapter Car Charger for Resmed S10 Series,ResMed Airsense 10 S10 AirCurve 10 Series CPAP and BiPAP Machine,90W Resmed S10 370001 37297 Rockpals 300W/500W Vehicle Power Supply Cord Cable Charger

  • ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W.
  • Compatible With ResMed Airsense 10 Series: AirSense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier.
  • Fits Resmed CPAP and BiPAP Machines S10 370001 +24V 3.75A 90W.
  • ResMed AirCurve 10 Series CPAP and BiPAP machine: AirCurve 10 S BiLevel Machine, AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier.
Check Stock

KFD DC Adapter 3 Pin Jack for 90W Resmed S9 Series Res Med IPX1 CPAP Machine S9 H5i REF 36003 369102 R360-760 DA-90A24 CPAP 36970 S9 Elite Machine S9 Escape Machines 12-24V Car Charger US Power Supply

  • ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W Connector Size:3 Pin. Total Cable Length 2.6M.
  • Compatible with Resmed S9 Series Res Med IPX1 CPAP Machine S9 H5i REF 36003 369102 R360-760 DA-90A24 CPAP 36970 S9 Elite Machine S9 Escape Machines.
Check Stock

BLUETTI AC200P Solar Generator with Panels Included 2000W Portable Power Station with 3pcs Foldable Solar Panel 120W SP120, Solar Power Generator for Van House Outdoor Camping

  • ...C200P solar power station (2000Wh/2000W,surge 4800W) and 3 Pcs 120W foldable solar panels(BLUETTI SP120, MC*4 solar charge cable length 118inch) , all the accessories for BLUETTI AC200P( 1*AC Adapter Charger*1,Solar Charging Cable(MC*4 to XT90,about 67inch)*1, Car Charging Cable(Car to XT90)*1,XT90 to Aviation Plug(input)*1, Manual*1)..
  • 【BLUETTI AC200P 2000Wh Power Station】-Solar/AC/Car/Generator/Lead-acid Battery Recharge: Wide 35-150V/Max.700W/12A solar Input, MPPT, allowing full recharge AC200P within 3-3.5Hrs(Only if Max.700W solar input). About 5.5Hrs to fully recharge it by One 400W AC adapter & supports 3Hrs by dual AC adapters (need to buy the 2nd adapter+DC7909 to XT90 cable separately).You can fully recharge it by 24V/12Vcar in about 10Hrs/20Hrs. AC+PV recharge AC200P simultaneously in about 2.5Hrs..
  • 【BLUETTI 120W Solar Panel】It’s made of high qualified monocrystalline silicon cells which is 5% higher efficient than traditional monocrystalline. It features with ETFE lamination thus has better light transmittance, more durable, scratch-proof, and easy to clean by wet cloth. Foldable design with handle, weight only 9.48lbs. Convenient to carry around for outdoor camping. Easily adjust the angle by the kickstands for better solar absor....
Check Stock

KFD DC Adapter for Resmed S9 Series Res Med IPX1 CPAP Machine S9 H5i REF 36003 R360-760 DA-90A24 CPAP 36970 S9 Elite Machine S9 Escape Machines 24V 3.75A 90W 12-24V Car Charger Power Supply Cord 3 Pin

  • ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W.
  • Connector Size:3 Pin. Total Cable Length 2.6M.
  • Compatible with Resmed S9 Series Res Med IPX1 CPAP Machine S9 H5i REF 36003 R360-760 DA-90A24 CPAP 36970 S9 Elite Machine S9 Escape Machines.
Check Stock

BLUETTI Portable Power Station AC200P 2000W 2000Wh Solar Generator 700W PV Max. Backup Battery Pack with 6 2000W AC Outlet(4800W Surge) for RV Home Emergency Outdoor Camping Explore …

  • ...ly for CPAP ssers. 3)Our unique “BLUETTI ECO”mode can prevent up to 50% of wasted electricity loss..
  • 【What You Can Get】: 24 months warranty. package include-1*portable power station (AC200P), 1*500W AC wall charger, 1*PV solar charging cable(MC4 to XT90), car charging cable(Car to XT90),XT90 to aviation plug(input),1*user manual, 1*customer service card..
  • 【700W/12A(Max) Solar/500W AC/Car/Generator Recharge】: with a Max 700W solar input allowing full recharge AC200P within 3-3.5 hours. solar charge mode: MPPT. allowing up to 40% faster charging times from the solar panels. 4.5Hrs to fully recharge it by one 500W ac adapter and supports 2.5Hrs by dual ac adapter (need one DC7909 to XT90 cable).you can also fully recharge it by 24V/12V car in about 10Hrs/20Hrs. AC(500W)+PV(solar input 700W) recharge AC200P simultaneously in about 2.2Hrs..
Check Stock